Hi Craig, Have a look at the enclosed PDF. As you can see it's drawn in the early nineties. It is the top end of the C-Drive and it shows clearly the double lipped seal at the ingoing shaft of the

The original outside helm seat is what he is looking for. CW

Hi Daniel, Over time thedecks can look quite ugly. I think this is true with every brand of boat. Someowners try to keep the original look. Others have taken a different turn. I don’tthis there

The outside saddle?> or the inside "bar stool" Aras -- Aras Grinius

I have a client looking for an original Maramu Helm Seat. Let me know. Bill

I use a remote control for the winch of the mainsail at the mizzen to lift my dinghy/outbordmotor on the deck if I am alone. Works great and easy to install. Bypass the switch with the DC relay moment

Thanks for the info. Best regards. Denis

Awesome, thanks Gary. I pulled the sensor out today and took a bunch of measurements and have a local shop sending a unit to me over night. If it fits, I will post what I used. If it does not, then

Hi Richard, welcome to the group! There is a subgroup in this forum where owners can post their yachts for sale. I can't imagine selling Kristy and not notifying the group first. If you are in the

I was able to replace the track sliders with the following from Amazon. DMSE Wholesale Ball Head Carrier Curtain Carriers Glides Sliders Slide, and Rollers (56

Hi Arlo, I had the fuel sensor on our Super Maramu replaced while I was in Greece. Wema built a custom unit for us out of the UK and sent it to us. The price was quite reasonable for a custom

The A55 comes standard with a remote for the mizzen since it is difficult to see the sail from the wheel if the hardtop is fully extended. I’m not at the boat but I believe it is a Telecontrol t

Denis, what kind of furler do you have for your genoa? -- John Bernard "JB" Duler San Francisco Meltem # 19, Western Med

Lipseals in the given dimensions and fitted with a stainless steel spring are standard industrial stuff which should be available more or less everywhere. Important is to grease them properly. We

Attached is a drawing of the propeller shaft outlet of SN, SM and 54. Dimensions of thee lipseal you will find in the drawing. Martin Mago del Sur - 54#40

Thanks Arlo, I agree mainly with you. This boat isn't updated or upgraded, but don't seems too much neglected. I' m a bit curious about why you consider the Mango as the best design of Henry Amel,

Hello, Has someone installed a radio remote controls for furling or unfurling? where did you find these remote controls.? Thanks Denis ex Meltem #32

Are the dimensions the same for 54s and SMs? Are they double lipped? Bob, KAIMI SM 429

Hey Arno, Perhaps on the 54 but not on earlier SM's, SN's etc. Do you also have an engine air intake filter? Not on the earlier models. Maybe global warming is causing more dust in the air such that

Hello fellow Mango owners. My port side fuel sensor has finally given up the ghost and died. I did all the troubleshooting and narrowed it down to the sensor. Has any of the Mango owners on here