I'll second Jean-Pierre's endorsement of "Captain Tolley's (Amazing) Creeping Crack Cure" ! 15 years or so on our hairline leaks of windows and still bone dry! That being said, I recall discussion

hi Ian, There is a liquid that we have here called captain tollyes creeping crack repair. https://www.amazon.com/Captain-Tolleys-Creeping-Crack-Bottle/dp/B00JQ6XHWC

Hello Judy and Ian, Eleuthera is SM007. Being a few years older than your vessel, it had exactly the same problems. However upon purchasing the boat some six years ago, we used a product called

Nothing to add on the drain arrangements, the normal bilge is where it should be going. On the question about the water pressure, it is useful to remember that all of these machines are designed for,

Right the gray water bilge in the engine room, not under the floor in the galley. ;) John Clark SM 37 Annie St Thomas USVI

Happy to contribute in any way I can. This group has helped me a lot as I make significant upgrades. Let me know if there is any additional information I can provide. My project starting Saturday

Thanks Dan, That is really helpful. I owe you one. Kind regards Mark -- Mark & Nicky Barter S/V Nunky SM 110

Hi Folks, Pen Azen is 20 years old and has about 65,000 miles under her keel. On the faux teak deck she has a number of hairline cracks, hard to see unless in sunlight and about 1-2 cm long. They

Hi Folks, Pen Azen is 20 years old and has about 65,000 miles under her keel. On the faux teak deck she has a number of hairline cracks, hard to see unless in sunlight and about 1-2 cm long. They

Thank Bill for all your efforts. Happy Sailing; Mohammad and Aty B&B Kokomo AMEL 54 #099

The folks at SOFOMARIN in France (supplier to Amel for PVC manifolds for the 55, 50, & 60) and I have been working on a PVC Secondary Saltwater Manifold in PVC for late model SM's. The original

Hi Mark, I did end up moving the motor mounts. The ones closest to the "C" drive remained basically in the same place. Center pin is approximately 2" aft of "C" drive body. Both sets of new mounts

Slavko, thanks, that looks nice and with good distance from the genoa so there is no interference. Regards Jarek NOA BLUE

Jarek, this is how is done on my Amel. Never mind the broken FM antenna that have been replaced. Regards, -- Slavko SM 2000 #279 Bonne Anse in Portoroz

Hi Bill, For interest you are correct. Amel did change the mast top along with many other things. When I bought Ladybug, my SM 216, from Amel, they offered the extra halyard holder as an

On our SM, the washing machine grey water goes from the drain pipe to a tee in the hose that runs aft to the bilge in the engine room. It works perfectly. The washing machine you have might be

Juan thank you, looks like the best solution for the masts we have Regards Jarek NOA BLUE

OK, the next time someone asks this same question, here is my answer😀☺😀

It seems you can see and access the copper line where the hose attaches. good luck!

Thanks for that insight Bill Hall. When you buy your Amel, I think you'll realize how valuable your answer was. The copper pipe runs under the starboard engine rail and is virtually invisible without