|
Re: Rudder Post Bonding
The only person that knows is the person who installed them. They were not installed by Amel.
Trace the wires.
Bill
The only person that knows is the person who installed them. They were not installed by Amel.
Trace the wires.
Bill
|
By
CW Bill Rouse
·
#56926
·
|
|
Rudder Post Bonding
Hello: I have just noticed two green wires close to the rudder post in Flora, and I have attached a photo. These two wires have been disconnected and I dont know why or by whom. Does anyone know what
Hello: I have just noticed two green wires close to the rudder post in Flora, and I have attached a photo. These two wires have been disconnected and I dont know why or by whom. Does anyone know what
|
By
Adam Body
·
#56925
·
|
|
Re: Forward Looking Sonar
I agree. If you're in mud or sand and in a place where you know the depth is going to be fairly level, you can move a bit faster. But, in this case you don't an FLS to scare you... Just look at the
I agree. If you're in mud or sand and in a place where you know the depth is going to be fairly level, you can move a bit faster. But, in this case you don't an FLS to scare you... Just look at the
|
By
Ken Powers SV Aquarius
·
#56924
·
|
|
Re: Super Maramu rudder filled with water
Ralf, Sharki #96 Sea Hobo has a hole in the bottom of the rudder.
Mark Porter
Sea Hobo
Sharki 96
Cargreen YC
River Tamar
UKQ
Ralf, Sharki #96 Sea Hobo has a hole in the bottom of the rudder.
Mark Porter
Sea Hobo
Sharki 96
Cargreen YC
River Tamar
UKQ
|
By
marklesparkle59
·
#56923
·
|
|
Re: Hand Basin
Ralf,
You might wish to try a home hardware store or camping van store. they should have one to fit. I don't think the company who made these are in business anymore. I tried replacing my a long
Ralf,
You might wish to try a home hardware store or camping van store. they should have one to fit. I don't think the company who made these are in business anymore. I tried replacing my a long
|
By
Aras Grinius
·
#56922
·
|
|
Re: Hand Basin
Get a new wife.....
Aras Grinius
Sharki #163 1988
--
Aras Grinius
Get a new wife.....
Aras Grinius
Sharki #163 1988
--
Aras Grinius
|
By
Aras Grinius
·
#56921
·
|
|
Hand Basin
Hi Amelians,
after 40 years, the hand basin on my Sharki is no longer attractive - says my wife.
Does anyone know the manufacturer or dealer who still sells such sinks?
Best Regards
Ralf
SV Baghira,
Hi Amelians,
after 40 years, the hand basin on my Sharki is no longer attractive - says my wife.
Does anyone know the manufacturer or dealer who still sells such sinks?
Best Regards
Ralf
SV Baghira,
|
By
Ralf Schroeder
·
#56920
·
|
|
Re: Super Maramu rudder filled with water
Hi Amelians,
is this hole only on the sm or is normaly on a amel and so on my sharki too - normaly?
Best Regards
Ralf
SV Baghira, Sharki #42
Hi Amelians,
is this hole only on the sm or is normaly on a amel and so on my sharki too - normaly?
Best Regards
Ralf
SV Baghira, Sharki #42
|
By
Ralf Schroeder
·
#56919
·
|
|
Re: Super Maramu rudder filled with water
Hi Helen and Kostas,
As others have said there is a drain hole in the bottom of the rudder. The rudder is hollow and the drain hole is in the bottom near the front. Over time, particularly if you
Hi Helen and Kostas,
As others have said there is a drain hole in the bottom of the rudder. The rudder is hollow and the drain hole is in the bottom near the front. Over time, particularly if you
|
By
Danny and Yvonne SIMMS
·
#56918
·
|
|
Re: Super Maramu rudder filled with water
Hi thanks everyone, we’ll look for the drainage hole!!
Hi thanks everyone, we’ll look for the drainage hole!!
|
By
Helen and Kostas Yuvanidi
·
#56917
·
|
|
Re: Super Maramu rudder filled with water
Helen,
If I had to guess, the hole at the bottom of your rudder is plugged with debris. Stick a screwdriver in there, rotate it around and it should loosen up any debris. Pour some water into the
Helen,
If I had to guess, the hole at the bottom of your rudder is plugged with debris. Stick a screwdriver in there, rotate it around and it should loosen up any debris. Pour some water into the
|
By
Scott SV Tengah
·
#56916
·
|
|
Re: Super Maramu rudder filled with water
Your SM had a drain hole at the bottom of the rudder. The hole must be clogged or someone filled it in.
Your SM had a drain hole at the bottom of the rudder. The hole must be clogged or someone filled it in.
|
By
CW Bill Rouse
·
#56915
·
|
|
Re: Super Maramu rudder filled with water
Hello,
There is a hole at the bottom of my rudder (A54).
When we lift the boat the sea water flows through this hole.
Dominique
Hello,
There is a hole at the bottom of my rudder (A54).
When we lift the boat the sea water flows through this hole.
Dominique
|
By
Dominique Sery
·
#56914
·
|
|
Super Maramu rudder filled with water
Dear all,
Our boat is out of the water at the moment and when we removed the zincs, a lot of water drained out. I seem to remember that there should be a drainage hole at the bottom of the rudder,
Dear all,
Our boat is out of the water at the moment and when we removed the zincs, a lot of water drained out. I seem to remember that there should be a drainage hole at the bottom of the rudder,
|
By
Helen and Kostas Yuvanidi
·
#56913
·
|
|
Re: Fresh Water Pump
Just wanted to circle back on my experience since starting this thread. We installed a Shurflo Aqua King II 4 gpm variable pressure (up to 55 PSI/3.8 bar) self-priming diaphragm type pump. No need for
Just wanted to circle back on my experience since starting this thread. We installed a Shurflo Aqua King II 4 gpm variable pressure (up to 55 PSI/3.8 bar) self-priming diaphragm type pump. No need for
|
By
Ian Townsend
·
#56912
·
|
|
Re: Foredeck dinghy cradle
Thanks for the photos Bill.
Wishing you a safe passage
Michael Nebo
Thanks for the photos Bill.
Wishing you a safe passage
Michael Nebo
|
By
michael winand
·
#56911
·
|
|
Re: Forward Looking Sonar
Had to laugh at this! Exactly what we did last summer, Ken. The Erie Canal is 2 to 3 meters deep for most of its 310 mile length. If you wish to transit it in the same month, you run 6-7 knots!
Had to laugh at this! Exactly what we did last summer, Ken. The Erie Canal is 2 to 3 meters deep for most of its 310 mile length. If you wish to transit it in the same month, you run 6-7 knots!
|
By
David Kurtz
·
#56910
·
|
|
Re: Curtain Sizes for SM2000
Since I bought the Recmar wrinkle band plastic hooks (heard the metal ones can break the plastic holder plus need to be re-bent) for the window curtains that Karen mentioned from Curtain-Tracks, I
Since I bought the Recmar wrinkle band plastic hooks (heard the metal ones can break the plastic holder plus need to be re-bent) for the window curtains that Karen mentioned from Curtain-Tracks, I
|
By
Richard May
·
#56909
·
|
|
Re: Maramu Helm Seat
Dennis, I will put you in touch. He is arriving in Hawaii today.
Bill
CW Bill Rouse Amel Owners Yacht School
+1 832-380-4970 | brouse@...
Address: 720 Winnie, Galveston Island, Texas 77550
Dennis, I will put you in touch. He is arriving in Hawaii today.
Bill
CW Bill Rouse Amel Owners Yacht School
+1 832-380-4970 | brouse@...
Address: 720 Winnie, Galveston Island, Texas 77550
|
By
CW Bill Rouse
·
#56908
·
Edited
|
|
Re: Maramu Helm Seat
Hi Bill,
I don't want to give up my helm seat but I don't plan on using it for a couple of months still. I could ship it to your client to use as a form to have a shop build him one if I'm sure to get
Hi Bill,
I don't want to give up my helm seat but I don't plan on using it for a couple of months still. I could ship it to your client to use as a form to have a shop build him one if I'm sure to get
|
By
Dennis Johns
·
#56907
·
|