|
B&G autopilot installation
Hello all. I have a 1985 Amel Mango hull # 46. I am installing a new B&G autopilot using the B&G T2 marine linear actuator. The space is tight but It will fit fine. I unfortunately need to cut some of
Hello all. I have a 1985 Amel Mango hull # 46. I am installing a new B&G autopilot using the B&G T2 marine linear actuator. The space is tight but It will fit fine. I unfortunately need to cut some of
|
By
Arlo
·
#56140
·
|
|
Re: Bilge pump activation switch
Once again thanks Bill. My initial research yielded some plastic toggle switch extensions (apparently popular with the motor-head crowd) but nothing durable looking. I might bring a toggle switch to
Once again thanks Bill. My initial research yielded some plastic toggle switch extensions (apparently popular with the motor-head crowd) but nothing durable looking. I might bring a toggle switch to
|
By
Thomas Kleman
·
#56139
·
|
|
Re: Bilge pump activation switch
Thomas,
Amel made the one on SM 387 from copper tube. I could not find copper tube when I needed it, but found aluminum tube. See a snippet of a page from my Amel Book:
Thomas,
Amel made the one on SM 387 from copper tube. I could not find copper tube when I needed it, but found aluminum tube. See a snippet of a page from my Amel Book:
|
By
CW Bill Rouse
·
#56138
·
|
|
Bilge pump activation switch
As I was cleaning the terminals of my bilge pump activation switch, it disintigrated and fell into the bilge. Oops. Fortunately I had 2 spare switches with mountings so no big deal. But a question to
As I was cleaning the terminals of my bilge pump activation switch, it disintigrated and fell into the bilge. Oops. Fortunately I had 2 spare switches with mountings so no big deal. But a question to
|
By
Thomas Kleman
·
#56137
·
|
|
An Amel Survey by Olivier Beaute - Sat, 01/16/2021 20:00-21:00, Please RSVP
#cal-reminder
Reminder: An Amel Survey by Olivier Beaute
When: Saturday, 16 January 2021, 20:00 to 21:00, (GMT+00:00) UTC
Where:From La Rochelle, France
An RSVP is requested. Click here to
Reminder: An Amel Survey by Olivier Beaute
When: Saturday, 16 January 2021, 20:00 to 21:00, (GMT+00:00) UTC
Where:From La Rochelle, France
An RSVP is requested. Click here to
|
By
main@AmelYachtOwners.groups.io Calendar <main@...>
·
#56136
·
|
|
Re: Engine Battery Drain - Is it the Prop Shaft Alternator?
You could try disconnecting the engine start battery and see if the voltage drop continues. That would establish if the continuing volts drop is actually due to a dead battery or because there’s an
You could try disconnecting the engine start battery and see if the voltage drop continues. That would establish if the continuing volts drop is actually due to a dead battery or because there’s an
|
By
Clive Chapman
·
#56135
·
|
|
Engine Battery Drain - Is it the Prop Shaft Alternator?
We're currently in a marina, on shore power with the battery charger on.. and the starter battery (2 year old Victron 110ah) has suddenly died - showing less than 2v! and reducing 0.01v every 5
We're currently in a marina, on shore power with the battery charger on.. and the starter battery (2 year old Victron 110ah) has suddenly died - showing less than 2v! and reducing 0.01v every 5
|
By
Alan "Woody" Wood
·
#56134
·
|
|
Re: ULTRA anchor 45KG or 35KG
Victor Hi,
many thanks for the pictures.
All the best
Jarek Zemlo
NOA BLUE
Victor Hi,
many thanks for the pictures.
All the best
Jarek Zemlo
NOA BLUE
|
By
Jarek Zemlo
·
#56133
·
|
|
Re: FEIT Freshwater Pump Troubleshooting
Ian,
Here are a few things for you:
You should not need to prime it, but you usually need to open a tap so air can escape.
The accumulator tank should be set with the pump OFF and the system
Ian,
Here are a few things for you:
You should not need to prime it, but you usually need to open a tap so air can escape.
The accumulator tank should be set with the pump OFF and the system
|
By
CW Bill Rouse
·
#56132
·
|
|
Re: FEIT Freshwater Pump Troubleshooting
Hello Ian,
Last time I changed the fresh water pump i had to prime it.
I just dropped water through the exit hose.
You might have rust in the pressure tank going into the diaphragm.
Envoyé de mon
Hello Ian,
Last time I changed the fresh water pump i had to prime it.
I just dropped water through the exit hose.
You might have rust in the pressure tank going into the diaphragm.
Envoyé de mon
|
By
Juan de Zulueta
·
#56131
·
|
|
Re: FEIT Freshwater Pump Troubleshooting
Envoyé de mon iPhone
By
Juan de Zulueta
·
#56130
·
|
|
FEIT Freshwater Pump Troubleshooting
Our FEIT freshwater pump won’t stop cycling. I have tried:
- adjusting cutin bolt spring
- cleaning the diaphragm
- changing out the D Squared switch
- playing with contacts
- sanding the brushes
Our FEIT freshwater pump won’t stop cycling. I have tried:
- adjusting cutin bolt spring
- cleaning the diaphragm
- changing out the D Squared switch
- playing with contacts
- sanding the brushes
|
By
Ian Townsend
·
#56129
·
|
|
Re: ULTRA anchor 45KG or 35KG
Hello Jared.
All I dd was to cut part of the fibre glass under de bow pulpit inox plaque. With just that centimeter in the aft part and also another cut of fibre and inox in the outer forward side,
Hello Jared.
All I dd was to cut part of the fibre glass under de bow pulpit inox plaque. With just that centimeter in the aft part and also another cut of fibre and inox in the outer forward side,
|
By
VICTOR MOLERO
·
#56128
·
|
|
Re: ULTRA anchor 45KG or 35KG
Hello Jared.
All I dd was to cut part of the fibre glass under de bow pulpit inox plaque. With just that centimeter in the aft part and also another cut of fibre and inox in the outer forward side,
Hello Jared.
All I dd was to cut part of the fibre glass under de bow pulpit inox plaque. With just that centimeter in the aft part and also another cut of fibre and inox in the outer forward side,
|
By
VICTOR MOLERO
·
#56127
·
|
|
Re: Replacing C Drive mounts while boat is in the water.
Thank you Ian,
I checked and I have not been able to see or find that ring, (I will dig a little deeper).
Paul Guenette
Aramis
SM - 444
Comox, BC Canada
Thank you Ian,
I checked and I have not been able to see or find that ring, (I will dig a little deeper).
Paul Guenette
Aramis
SM - 444
Comox, BC Canada
|
By
Paul Guenette
·
#56126
·
|
|
Re: ULTRA anchor 45KG or 35KG
Victor Hi,
Thanks and would appreciate if you could send some pictures of modifications done on the bow roller for fitting 45KG Ultra.
Jarek Zemlo
NOA BLUE
Victor Hi,
Thanks and would appreciate if you could send some pictures of modifications done on the bow roller for fitting 45KG Ultra.
Jarek Zemlo
NOA BLUE
|
By
Jarek Zemlo
·
#56125
·
|
|
Re: ULTRA anchor 45KG or 35KG
Martin,
many thanks for the chain explanations.
Best regards
Jarek Zemlo
NOA BLUE
Martin,
many thanks for the chain explanations.
Best regards
Jarek Zemlo
NOA BLUE
|
By
Jarek Zemlo
·
#56124
·
|
|
Re: Replacing C Drive mounts while boat is in the water.
Thank you Craig, Mark, Eric and Ian (and Alex). I really appreciate your help.
I also have the extra alternator for generating power while under sail. It looks like I can remove it as one unit by
Thank you Craig, Mark, Eric and Ian (and Alex). I really appreciate your help.
I also have the extra alternator for generating power while under sail. It looks like I can remove it as one unit by
|
By
Paul Guenette
·
#56123
·
Edited
|
|
Re: Eno - 4 Burner Cooker and Grill - FOR SALE
#stove
Hi Alan,
I do have some turn on/off knobs. If you don’t pull the cover plate out when grilling you can melt these.
I am currently offering all spares as part of the oven sale.
Will let you know next
Hi Alan,
I do have some turn on/off knobs. If you don’t pull the cover plate out when grilling you can melt these.
I am currently offering all spares as part of the oven sale.
Will let you know next
|
By
Barry Connor
·
#56122
·
|
|
Re: Eno - 4 Burner Cooker and Grill - FOR SALE
#stove
Hi Eric,
Contact: connor_barry@...
UK Cell: +44 7790 399900
Martinique Cell: +696 696 50 90 49
Best. Barry
Hi Eric,
Contact: connor_barry@...
UK Cell: +44 7790 399900
Martinique Cell: +696 696 50 90 49
Best. Barry
|
By
Barry Connor
·
#56121
·
|