|
Re: Yanmar 100HP Fuel Pump maintenance-free?
Hello Bill and Craig,
Yes, the question is about the fuel injection pump. On the Yanmar, it is a ZEXEL NP - VE - 4 / 12 F 1900 R NP1995.
Craig, interesting that you had the pump rebuilt at 4,000
Hello Bill and Craig,
Yes, the question is about the fuel injection pump. On the Yanmar, it is a ZEXEL NP - VE - 4 / 12 F 1900 R NP1995.
Craig, interesting that you had the pump rebuilt at 4,000
|
By
svperegrinus@yahoo.com
·
#36478
·
|
|
Re: Yanmar 100HP Fuel Pump maintenance-free?
Hi Francesco,
I think you may be asking more of a philosophy question than an engine maintenance one :-)
Then again, nothing is maintenance-free forever. There are some signs of overhaul being
Hi Francesco,
I think you may be asking more of a philosophy question than an engine maintenance one :-)
Then again, nothing is maintenance-free forever. There are some signs of overhaul being
|
By
Craig Briggs
·
#36472
·
|
|
Re: Yanmar 100HP Fuel Pump maintenance-free?
We you say "fuel pump" are you referring to the lift pump or the injection pump?
We you say "fuel pump" are you referring to the lift pump or the injection pump?
|
By
greatketch@...
·
#36471
·
|
|
Re: Iridium Go
Re Porter's scale.
I have the Iridium external marine antenna installation (2015). The antenna is located aft, port side, where Amel used to install the GPS antenna. My findings:
Iridium Go at the
Re Porter's scale.
I have the Iridium external marine antenna installation (2015). The antenna is located aft, port side, where Amel used to install the GPS antenna. My findings:
Iridium Go at the
|
By
svperegrinus@yahoo.com
·
#36470
·
|
|
Yanmar 100HP Fuel Pump maintenance-free?
Hello,
Looking at the Yanmar "Operation Manual", there is no mention of maintenance of the fuel pump, nor of any maintenance adjustment.
In the "Periodic Checking List" page of the Yanmar "Service
Hello,
Looking at the Yanmar "Operation Manual", there is no mention of maintenance of the fuel pump, nor of any maintenance adjustment.
In the "Periodic Checking List" page of the Yanmar "Service
|
By
svperegrinus@yahoo.com
·
#36469
·
|
|
Re: [Amel Yacht Owners] Santa Marta
By
eric freedman
·
#36468
·
|
|
Re: [Amel Yacht Owners] Re: Iridium Go
By
eric freedman
·
#36467
·
|
|
Re: [Amel Yacht Owners] Re: Iridium Go
so is your antenna installed outside? if so where?
so is your antenna installed outside? if so where?
|
By
Courtney Gorman
·
#36466
·
|
|
Re: [Amel Yacht Owners] Re: Iridium Go
By
eric freedman
·
#36465
·
|
|
Re: [Amel Yacht Owners] Re: Dish washer/washer dryer
Same as most the others on this thread. The clothes washer is excellent, quiet and we hang the washing to dry. It is such a pleasure to have that really good Thompson washing machine on board. We love
Same as most the others on this thread. The clothes washer is excellent, quiet and we hang the washing to dry. It is such a pleasure to have that really good Thompson washing machine on board. We love
|
By
Colin - ex SV Island Pearl
·
#36464
·
|
|
Re: [Amel Yacht Owners] Re: Iridium Go
thanks Porter!
By
Courtney Gorman
·
#36463
·
|
|
Re: [Amel Yacht Owners] Re: Iridium Go
Re the antenna.
I have exactly your setup.
Installed, older iridium phone, and New iridium go with adaptor. My findings:
Iridium Go at the Nav station with native antenna: 3/10 in connectivity
Re the antenna.
I have exactly your setup.
Installed, older iridium phone, and New iridium go with adaptor. My findings:
Iridium Go at the Nav station with native antenna: 3/10 in connectivity
|
By
Porter McRoberts
·
#36462
·
|
|
Re: [Amel Yacht Owners] New file uploaded to amelyachtowners
That’s very useful Thomas. Very Appreciated.
Porter
Ibis-54-152
That’s very useful Thomas. Very Appreciated.
Porter
Ibis-54-152
|
By
Porter McRoberts
·
#36461
·
|
|
New file uploaded to amelyachtowners
Hello,
This email message is a notification to let you know that
a file has been uploaded to the Files area of the amelyachtowners
group.
File : /Running Rigging/Amel 54 Running
Hello,
This email message is a notification to let you know that
a file has been uploaded to the Files area of the amelyachtowners
group.
File : /Running Rigging/Amel 54 Running
|
By
amelyachtowners@...
·
#36460
·
|
|
Re: [Amel Yacht Owners] Re: Hurth Gearbox heat exchanger coupling
Transmission Oil Cooler - Bowman DC60-XCC/#3367 end caps
I paid 185 euro complete.
Best,
CW Bill Rouse
Admiral, Texas Navy
Commander Emeritus
Amel School http://www.amelschool.com
720 Winnie
Transmission Oil Cooler - Bowman DC60-XCC/#3367 end caps
I paid 185 euro complete.
Best,
CW Bill Rouse
Admiral, Texas Navy
Commander Emeritus
Amel School http://www.amelschool.com
720 Winnie
|
By
Bill & Judy Rouse <yahoogroups@...>
·
#36459
·
|
|
Re: [Amel Yacht Owners] Re: Photos Section Problems - Yahoo Nov 2017
Derick,
When my two kids owned a computer repair shop, they would sometimes code a repair ticket with "PEBCAK." They did this so that the receptionist (their mom) would know how to handle the
Derick,
When my two kids owned a computer repair shop, they would sometimes code a repair ticket with "PEBCAK." They did this so that the receptionist (their mom) would know how to handle the
|
By
Bill & Judy Rouse <yahoogroups@...>
·
#36458
·
|
|
Re: Hurth Gearbox heat exchanger coupling
Thanks Bob,
Do you have the BOWMAN part number for the heat exchanger?
If they're only $160, I should maybe replace the whole thing just to be sure?
Or at least to have a spare.
Cheers
Alan
Elyse
Thanks Bob,
Do you have the BOWMAN part number for the heat exchanger?
If they're only $160, I should maybe replace the whole thing just to be sure?
Or at least to have a spare.
Cheers
Alan
Elyse
|
By
Alan Leslie
·
#36457
·
|
|
Re: Photos Section Problems - Yahoo Nov 2017
Gary,
For the last couple of weeks I have had the same issue with trying to access the photos section. Despite re-logging in to my Yahoo account (which is necessary to access file or photos sections,
Gary,
For the last couple of weeks I have had the same issue with trying to access the photos section. Despite re-logging in to my Yahoo account (which is necessary to access file or photos sections,
|
By
Derick Gates
·
#36456
·
|
|
Re: Hurth Gearbox heat exchanger coupling
Exactly, when you clamp the new rubber reducers on, it is important to be careful not to tighten them too much. I'm sure you know this but I thought I would get it in the posting for anyone
Exactly, when you clamp the new rubber reducers on, it is important to be careful not to tighten them too much. I'm sure you know this but I thought I would get it in the posting for anyone
|
By
rossirossix4
·
#36455
·
|
|
Re: [Amel Yacht Owners] Maramu Steering
sorry Christian - i have (only) just discovered the groups photos and files section!
so i can see the images of the rudder much clearer now :)
Thanks again
Miles
sorry Christian - i have (only) just discovered the groups photos and files section!
so i can see the images of the rudder much clearer now :)
Thanks again
Miles
|
By
smiles bernard
·
#36454
·
|