Must be an epidemic of manifold rebuilds! We are in the process of redoing ours. While I LOVE the idea of a seachest, the original Amel implementation on our Super Maramu (#160) always bothered me a

Porter, Thanks for thatvery kind safety net offer. I think I havethis figured out. I am going to use a 1-1/2” hose barb and sand down the edgesof the barb. I should then be able to warm

This is the kind of project I would not undertake unless within walking distance to a great chandlery ripe with plumbing options. My adventure down this rabbit hole was complicated even with one

Could you take an appropriate sized plastic pipe fitting to a plumbing or machine shop and have them cut the threads into the plastic? Thanks, Doug Smith Amel 54-113, Aventura Deltaville, VA

Hi Tom, I am in theprocess of ordering the part to make the manifold similar to the one Billshowed in Amel-Martinique. My concern is,the impossible to find hose barb is in very tight. If I

Hey Mark, we seem to be working on the same project. My sea water manifold is corroded and I'm building a new one. 10 years ago I changed out the original Amel ball valve for one made of Marelon. At

I heard back from US Plastics. This fitting is not one theymake. Also, not available from Banjo or McMaster. I am at a complete loss forthis fitting. Any help would be greatly appreciated.

That would be wonderful. I will see if he has time, but I suspect that he is tied up on his newest project. Jimmy Cornell’s new project:Aventura Zero & the Elcano Challenge To commemorate the

John. Great Question!! Thanks Porter McRoberts S/V IBIS A54-152 MooreaWhatsApp:+1 754 265 2206 Www.fouribis.net

Thanks Tom. I send them a note seems I can’t find it on theirsite. I have alsocheck the Banjo catalog and McMaster. Not much luck. With bestregards, Mark Skipper Sailing

Thank you for responding to my query about the injector, it will be very helpfull to me. Ahmet

I found as a reference only “NIREF” with a number 5, 10 ??? Perhaps NI for Nirvana De : main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] De la part de Greg

Thank you very much Philippe, Do you know what brand of furler it is? Thanks Greg

See the file attached Best Phil De : main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] De la part de Greg Wala Envoyé : dimanche 11 octobre 2020 21:54 À :

Many thanks for setting this up Bill and also to Tilo for putting it on UTube. Wonder if at some point Jimmy might do a chapter from Panama into the Pacific and beyond to the west Best

Hi, would anyone have the drawings for the Automatic Jib Furler from the 1985 era? I played around with the engage/disengage lever on the casing and now cannot get the gears to engage again no matter

Mark- you might go with 1-3/8 for the 35mm side and try US Plastics.

You can have a look at the links

Hello Ahme, I have 4 injectors. But they are in Sint Maarten and I am stuck in France. Should be able to be back in Nov. I purchased mine as spare from Diesel Services of America (I don’t

Hi, try this site https://www.marinepartseurope.com I have used them in the past and are ok. regards, Slavko SM2000 #297