I got replacements from Amel there is a Top one and s bottom one - note carefully their positions before removing. I just sent a photo to Amel and asked for two. Peter

I have attacehd the photo as it did not appear in my last post.

Peter, Thanks. It looks like the small unit attached to the pole has corrosion. Would you know if this is reparable or will I need to get a replacement from Amel? See photo below. Cheers, Paul

Hi, based on the input from the forum, I decided to stay with the existing cooler. I however had to change the waterpump and installed a filter because the tubes were congested. Some of the comments

Hi Paul, I changed the contractor buttons for the up and down, (top and bottom) and then discovered that the connectors from the contact at the bottom was corroded at the joins. It was hard to see the

There are excellent You-Tube DIY videos on Boatworkstoday.com. One is Making a Fiberglass Mold of Your Gelcoat Nonskid for Repair. That's followed by a second on using the mold for Gelcoat Nonskid

Paul, The signal wires are two small black wires that attach to two sensors cables tied onto the silver coloured shaft up and down which the thruster motor slides. These black wires disappear into the

Ian, In the case of really small areas, I have had some luck with filling the area with gelcoat, then penciling in the lines to be cut. I then create some simple custom tools to carve and shape

Hi, I'm hoping someone can help me. I have an Amel 54 with sidepower bow thruster. The indicator light (and sound) for when it reaches the down position has stopped working. Would someone be able to

James Thanks for the information. I don’t have any big areas of damage to warrant the making of a mould, but it’s a useful description of the procedure should it happen. Mine are small areas,

Alex, We have only used galvanized chain on our Super Maramu. There are times (usually after quite rough sailing) that the chain pile has fallen over and needs help coming out of the locker. In

Ian, If you are dealing with a small area, it is possible to lift a copy of the deck pattern using a mold which can be used to create a patch of gel coat that can be fitted into the deck. It is

Miles I don’t know how to replicate the non slip pattern. It’s a great design cos it doesn’t hurt your feet. However the colour of the Santorin and probably every other Amel is an ivory - so

Hello Alex, There are only few or one? quality of stainless steel qualified for saltwater ! with water temperature over 25 degree Celsius. If the steel is not qualified you have cavities in the

Thomas, How did the install go? Duane Wanderer, SM #477

Gary: A bandwidth of 150 GB per second is rather unusual when GB means GigaBits as you wrote. At home I have an optical fiber cable connection with the fastest available internet connection of 100

Hello There are a few small areas of damage to my deck I believe the non slip faux teak is part of the original layup gelcoat? Does anyone have any advice on good ways to repair small sections

This may fix your problem: Using a browser, go to the Amel Owner's Group website on Yahoo. Log out, then login. Usually works except when it is caused by low bandwidth. CW Bill Rouse Admiral, Texas

Dear Amelians, my original stainless steel anchor chain that came with the boat in 2005 doesn't look good anymore. I want to replace it. Given the position of the anchor chain locker and the inability

I seem to remember at least one owner looking for the Icom 24VDC to 12VDC converter for an SSB...here you are for $250 https://www.ebay.com/itm/222715613955?ul_noapp=true Best, CW Bill Rouse Admiral,