Hi Dirk; The pressures you are observing are fine, based our experience. The oil pressure sensor is a simple switch that triggers at a certain oil pressure. I’m not sure what exact pressure, but

The time has come to finalize the group purchase of the white rub rail inserts. Presently we have nine owners that are purchasing new inserts. Based on that number their cost should be, based on two

Our new Volvo Penta D-3 has 4.48 bar at 1800 rpm. You might be OK. ~~~⛵️~~~Matt

Hi Paul, Ralph, Mohammad and Arno, thank you for your answers and your experience. We connected an external gauge and the pressure is with cold engine at 2bar at 700rpm (idle) and 4bar at

cost - benefit ;-)

Hi Ken, I agree, we carry two spare (three in total) for bringing the ballooner down and one spare (two in total) for hoisting - haven't broken any yet. We also carry numerous spares like bow thruster

Jose, Well if your antifreeze is only warm when the gauge reads 225 or higher ,then its obviously not running hot and it is likely a sensor or gauge issue. When you pulled out the H/E core was there a

Thanks Mark. Both examples look good. Certainly keen to keep the LN175amp alternator if we can. The Wakespeed WS500 looks like a good product for now and the future. Cheers Ross and Donna SV Intrepid

Reminder: Zoom meeting - QSails owner/manager will present sails for Amels When: Saturday, 12 September 2020, 20:00 to 21:00, (GMT+00:00) UTC An RSVP is requested. Click here to

You can replace the Leece-Neville internal dumb regulator with an external smart regulator. Email me is you want instructions brouse@...

I suggest that you need to back up some from your assumptions and take a different approach. First of all, if you pay £500, for SW302521 Filmtec membranes, you are definitely overpaying. They should

Ross, You could just install an external alternator controller that will allow you to program the alternator to safely charge either your new AGM or future LiFePO4 batteries. Examples

Pat, thanks for the suggestions. Yes I am going to order 2 infrared guns! Sounds like a good thing to have. I cleaned the heat exchanger in March and the boat sat at Le Phare Blue (Grenada) for 5

Thanks Elja, This will be one for us to look at. Kind regard Ross and Donna

He Ross he Donna Look hier by the Mastervolt altinator he is expencive but you can change the program for AGM and licium https://www.mastervolt.de/produkte/lichtmaschinen-laderegler/ Best Elja SM

Greetings! just ordered two new ones from Maud. [01888] CROCHET DE BALLOONER ERTALYTE/ Ballooner hook (Ertalyte) for 74EUR each w/o VAT + shipping kind regards -- Michael & Robyn SY RIPPLE SM2K #

On Fri, Sep 4, 2020 at 01:03 PM, Symphony wrote: Icerette from Raritan

Hi Team, We have recently replaced our house batteries with 12 x Victron 110amp Gel batteries to give us 660amp capacity. We have Solar set up through a Victron MPPT with 3 x 200w panels We ultimately

Hello Ken, Great vidéo informative and entertaining. I understood you went for 12V Lifepo. On the chat it was advised to go for 24V Lifepo that would better balance the cells by the integrated

Jose, It sounds as though you think it may be a matter of sensors giving you a false reading ,yet you said the exhaust was steaming ,was there other signs of overheating ,like antifreeze or steam