I heard back from US Plastics. This fitting is not one theymake. Also, not available from Banjo or McMaster. I am at a complete loss forthis fitting. Any help would be greatly appreciated.

That would be wonderful. I will see if he has time, but I suspect that he is tied up on his newest project. Jimmy Cornell’s new project:Aventura Zero & the Elcano Challenge To commemorate the

John. Great Question!! Thanks Porter McRoberts S/V IBIS A54-152 MooreaWhatsApp:+1 754 265 2206 Www.fouribis.net

Thanks Tom. I send them a note seems I can’t find it on theirsite. I have alsocheck the Banjo catalog and McMaster. Not much luck. With bestregards, Mark Skipper Sailing

Thank you for responding to my query about the injector, it will be very helpfull to me. Ahmet

I found as a reference only “NIREF” with a number 5, 10 ??? Perhaps NI for Nirvana De : main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] De la part de Greg

Thank you very much Philippe, Do you know what brand of furler it is? Thanks Greg

See the file attached Best Phil De : main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] De la part de Greg Wala Envoyé : dimanche 11 octobre 2020 21:54 À :

Many thanks for setting this up Bill and also to Tilo for putting it on UTube. Wonder if at some point Jimmy might do a chapter from Panama into the Pacific and beyond to the west Best

Hi, would anyone have the drawings for the Automatic Jib Furler from the 1985 era? I played around with the engage/disengage lever on the casing and now cannot get the gears to engage again no matter

Mark- you might go with 1-3/8 for the 35mm side and try US Plastics.

You can have a look at the links

Hello Ahme, I have 4 injectors. But they are in Sint Maarten and I am stuck in France. Should be able to be back in Nov. I purchased mine as spare from Diesel Services of America (I don’t

Hi, try this site https://www.marinepartseurope.com I have used them in the past and are ok. regards, Slavko SM2000 #297

Hi everybady, I am looking for Bosch fuel injector for my volvo TMD22 P (1999) engine. I need your advices to find a supplier for europe. İnjectorModel : 2FH KBEL 68P67 200bar Thanks for your

Great presentation last night from Jimmy - many thanks Bill and Tilo for organising this, it was my favourite one to date. Best wishes, Scott

I’ve uploaded a direct recording of the Zoom meeting and added subtitles to it so it should enable you to follow along even if your audio doesn’t keep up. Here’s the link:

The quality of your reception is based on your internet connection, and each of the participants. Best, CW Bill Rouse Amel Owners Yacht School +1 832-380-4970 | brouse@... 720 Winnie, Galveston

Hi Bill When I try to listen to it, the audio is broken up. But thanks for taking the time to put it together. Harry

Agreed, it was a very good presentation. Thanks Bill and Tilo for putting this together. Brent-- Brent Cameron Future Amel Owner & Amel Owner Registry Moderator Oro-Medonte, Ontario, Canada