Bill, I was able to find on-line the Aqua Signal official replacement outer ring and gasket (gasket goes on the inside of the bulb to keep the electrical connections between the bulb and the mast

I tried to get p/n 819751. It is no longer listed. I will try to call them. Can someone recommend a companionway seal that is currently available. VLADIMIR S/M 345 "LIFE IS GOOD"

Hi Mark. On our 1980 Sharki the emergency tiller shaft fits through the cavity at the rear middle of the aft cabin roof. The cap just lifts off. Then the shaft travels through the ceiling and into a

Hanspeter, What Iresponded to was you extremely mean and rude email posted regarding Paul’s AC difficulties. Paul i think its not the righttime to ask the forum about your ac problems. Read

Mark, All good points that I will look at. That link you sent made some good points as well . I was unable to get beyond 2200 , that is why I changed the filters. Thanks for taking the time. Thanks

Bravo Skipper Mark did you really understand my bad english rethoric before critisime me on this forum. I gave the only right answere to solve his ac problem, but we are discussing Alex' s

Kent which swiss conulate you will call. I posted on this forum exactly what is to do! read it and if you have better infos then write to me at hanspeter.baettig at bluemail.ch its all about to

Bravo Mark!

That's just plain rude Hanspeter. I guess you were never a neophyte with a big boat and all kinds of systems that you never had to work on. I was (and still am), but I'm getting better, thanks to the

Wow! This is really mean. If someonewants to post or help, then let them. You don’t haveto read this you know. Please don’tchoke the forum with hate mail or your opinions on

Hi again Pat you are in fresh water, means for me salt water but clean and nice to swim. anywy i can put my 27 years old perkins, 4 cylinder, turbo, 3800 h normaly to 2800 rmp, i do that only in

Thank you both, Bill R and Bill K. If my display/brain is working I'll get the IB5124, if not, I'll get the Quick unit. What a great, knowledgeable, friendly family we have!! Kent S/V Kristy

Kent, Others havealready done this for him. I read the troops landed today and things should begetting better very soon. Ships have also arrived with aid. With bestregards, Mark

Alex, So sorry to hear how bad it is there. I will call the Swiss Consulate but I need your full name, date of birth, passport number, anything else you think they will want. Maybe Amel can help you

Mine is made of Sunbrella. Kent S/V Kristy

Wow! This is really mean. If someone wantsto post or help then let them. You don’t haveto read this you know. Please don’tchoke the forum with hate mail or your opinions on how the

Hanspeter, I dove on my prop today and it was pretty clean, but scraped it anyway, the bottom had only a slight slime/growth , my boat lives in fresh water. Its been far worse and always ran up to 300

Pat, the fact you can get to 3000rpm in neutral doesn’t tell usmuch. It is the load that is causing the problem. The engine is not generatingenough energy to offset the applied load. Fuel is energy.

pat dont touch the Bosch injector engine !! if you dont see diesel is coming a little bit out of the injection conection to the cylinder input; then your problem is elswere. clean your hull. if you

Mark, Thanks for getting back . I used the same and correct filters. I observed that the linkage moved forward well beyond the 2200 point , but no further increase in rpms. The engine seems to run