Hi Duane, There should be a rudder indicator test in the diagnostic and set-up section of the plotter. It will check for the full voltage range of motion as well as polarity. Poke around in the menus

Hello to all. Can you please tell me at what pressure the fresh water pressure cut-off switch should stop the pump. The boat is new to us and I'm just starting to get familiar with the systems. We

It's tough to catch a break! We recently had the S3G Course Computer go down. The problem was diagnosed as a factory programming glitch that sends out a "kill" signal that shuts the unit down.

Kent , We'll be here , stay for dinner , spend the night if it fits your schedule. Let us know. Pat SM #123

Olivier, Just apologizing for misspelling your name. Cheers

Oliver, Thanks for that amazing explanation. I've recently purchased SN27 which is in fact 90/91 era. She has the 4 bolts. Trevor SV Iris, SN27 Phuket - on the hard

Hello, yes there are several Santorins (probably only sloops) that have a main mast with a backing aluminum bar (inside the mast) at the front bottom, and bolted with 4 stainless steel bolts (with SS

grazie

Thks!

Hi Pat. Great to hear from you. I'd love to see what you've done. I'm going to NC on Wed to visit grandkids,back on Monday the next week. Maybe I can drive over for a short visit? Hi to

Kent, Welcome back to the Bay , I just did all that except the hatch gaskets , which are on my list. If you up this way take a look at what we have done , its worked out well. If not maybe Diane and I

The Oceancraft is a really nice choice, but I can tell you the Delos sized model won't fit. I have a SM and the 10ft AB Mares VSX barely fits anywhere on the SM. Last passage we suspended it on the

I was referring to the OceanCraft Aluminum dinghy on SV Delos and SV Island Pearl II. I want to order one from Australia and have it shipped to the USA. I have a 48ft Maramu and I wondering if i need

Wow! Thanks, Bill. What a great resource these are! Kent Robertson S/V Kristy SM243

Kent, You will get all of your answers from the attached page from my Amel School Book, which you can also view here:

Hi Amel cousins! I hope you are all having a grand time where ever you are. I am back inSt Michaels,Maryland preparing Kristy for Pacific cruising in a year or so, and spending time with my new

In case someone might want the Icom Converter that Amel used when installing a SSB, here it is on Ebay for 25% of the original cost: Icom PS-66 DC-DC Step Down Converter - 24v in 13.6v out:

No bolts on my sloop mast foot. SN 24 1990 Ric Gottschalk Kitchen Magic Refacers, Inc Office 410-923-5800 Fax 410-923-5802

I agree with Eric. Contact Olivier Beaute gmail.com> I also agree with Craig...I do not believe those bolts are original. Best, CW Bill Rouse Admiral, Texas Navy Commander Emeritus Amel School

Craig, Thanks for the info/source . Pat SM#123