This won't help address your specific problem, but may be an idea for future: I've found that the nav lights I have for the dinghy, which are the Navisafe Navilight TriColor 2NM and the Navi light

Some years ago I had a NZ registered boat that required the Cat 1 inspection before departing for bluewater destinations. I changed the registration to British so I didn't need to go through that

Last month there were three SuperMaramu 2000's in the Marmaris area, all looking for a haul out, repair work, polish and antifouling. One went to Gocek, one went to Yat Marina in Marmaris Bay and I

Hi Bill Your understanding is pretty much correct. I think Danny of Ocean Pearl has secured cat 1. I have Cat 2 for Nga Waka and there is little difference except the certificate is valid for 2

This is strictly a question to satisfy my curiosity and further my nautical education, it has no practical utility for me. But curiosity has always killed the cat... My understanding (which might

Jose, I think you couldrun the unit with the panel off so you can access the workings of the washer.The pump is easy to spot and replace. During the rinse cycle you could feel thepump with your

If the drum is 2/3 full I would start by checking the level switch and its circuit. The drum should NEVER bee that full. I am betting the problem is with too much water coming IN rather than not

I use ShipSHape Pro, and definitely have a love/hate relationship with it. On the plus side, it does everything you ask and quite a bit more. It works as designed, well and smoothly. Easy to save

The last time we tried to use the washer, it worked fine until the rinsing cycle and after a few minutes it started to dump water to the floor. It was not just a small leak it was a major flood!!!.

We use MS Outlook. Tasks can be scheduled as repeat tasks(weekly, daily, every Sunday etc,) Files can be attached to task so excelsheets, pdf of instructions or pictures pop up when the task is due

Does anyone have any experience with any of the yacht maintenance apps? Yes, almost everything is on our computer already but we're in an endless struggle to keep organized our maintenance records,

Filmtec ships the membranes in two ways: Dry; which has an indefinite shelf life, or Wet with a preservative solution; which has a 12 month shelf life Ref:

I have just posted a photo description of the removal procedure in the photo section of this site.

Soraya & Thomas, I see that Hutter gave you a source in the EU for membranes. Hint: According to Air Water Ice, Filmtec SW membranes have a shelf-life of 6 months. If you suspect that the supplier

OK! Success at last with the help of Thierry from Amel. The correct procedure to remove the mainsail furling swivel on the 1988 to early 1990 Maramu is: 1) Loosen the four bolts holding the

​Dena, I am aware that the LED fixtures on a 54 have been problematic. I know of several owners that had these changed by Amel under warranty. ​This may help, but my memory is fuzzy on

try inaqua.de - they worked for me fair winds Robin Amel SM #56 GrosDoux GrosDoux – Ein Segelabenteuer

Dear All, It seems we may need to replace our watermaker membranes (Dessalator DUO100, filmtec SW30-2521). Wondering if anyone has had to source membranes in Europe recently, and if you can recommend