Sounds like our Henri. Fantastic guy Danny SM 299 Ocean Pearl Sent from my Vodafone Smart

Thanks for the help on the strainer basket. I placed an order with Vetus Marine. Part numbers and costs are VE FTR13202 FTR1320 5 pack o-rings $24.75; VE SET0187 FTR1320 strainer basket $23.00--Vetus

Hello Paul. First, call your insurance company. They will probably want you to use someone local. You don’t have to but the costs to get him there and back could be on your account. Some are glad to

You can also remove the fiberglass arrow cover with the Amel logo’s and take it to any good graphics supply studio. Most have technology to reproduce better quality highly anti UV protected

Thank you for the advices I was my self thinking of the impact around the mast area as there could be a major impact there. Will follow your idea with a professional surveyor. Can you forward the

Hi Paul and sorry about your bump. You are starting off with bad advice as anyone who says this is cosmetic is wrong. Cosmetic is abrasions and deep scuffing. Anytime you have structural delamination,

Hi Paul, Sorry to hear you have some damage to Kerpa. I'm certainly no expert, but if you have some de-lamination on a bulkhead, I would consider finding a good surveyor who knows Amels that can do a

Patrick and othersWe had some hard encounter with a submerged breakwater. We hit with the keel just where the reflector of the transducer are for the logg. There are some de-lamination around the

Thank you for helping!! DR. UWE V. VOLKMANN LtCol Kommt von mobilem Gerät, bitte entschuldigen Sie mögliche Fehler! Mobile Typing...Faults possible... Sorry! Am 28. Jul. 2017 um 22:52 schrieb SN 108

I think Olivier Beaute will travel to anyplace in Europe.

Olivier Beaute can help you absolutly, very professional and cheap I think. Br SN 108 Vagabundo Sardinia Inviato da iPhone

Bill, Thanks- Been there done that Fair Winds Eric

Cool thanks Rink. If I don't find a "shiny solution" before I head back down to Caribbean then I will ask Jean Collin. Regards. John John Clark SV Annie SM 37 Charleston SC

Ahh, Emek. Yes their stainless work is good. Just finished installing their arch sent as a kit. Arch is great. Haven't been to Turkey so I can't testify to other work. Thanks for the

Bill Kinney, One person's myth is another person's fact. And in this case, I think we have a combination of myth and fact. I believe that it is a fact that front opening refrigerator doors lose cold

Eric, Yes, these 12mm seals are very common...I bought some in Penang, Malaysia for about $5.00US. You need to ensure, with a magnet test, that the spring in stainless steel...you know about "Chinese

Dear all, I own one of the very first SM2k , hull number 238 , built and registred late in october 1998 . Originaly named '' Ouled '' , owned by family Amel as usual , the boat was used as commercial

My SM (that I just closed on yesterday!) is hull number 233. It is not a SM2000. It was built in July 1998. I can believe that 232 was the first SM2000, but it definitely wasn't the start of full

I installed a Frigoboat G60035 with keel cooler. Great! Suggestion: do not get the separator units. You get more useable volume by bulk loading. Jean-Pierre Germain, SY Eleuthera, SM 007