|
Air Conditione
Problems with the air conditione .
we change the water pump fron The aircondition an on land powerer it works .
Now we are ancorring and try it by the generator and the pump dont working
Any idea
Problems with the air conditione .
we change the water pump fron The aircondition an on land powerer it works .
Now we are ancorring and try it by the generator and the pump dont working
Any idea
|
By
eljaroellinghoff@...
·
#34296
·
|
|
Down wind rig for maramu 46
Hello
I'm new to amel and and just going through with a maramu purchase
We are planning to take her fro Europe on a North Atlantic trip. Perhaps the Pacific too
I've also never sailed a ketch
Hello
I'm new to amel and and just going through with a maramu purchase
We are planning to take her fro Europe on a North Atlantic trip. Perhaps the Pacific too
I've also never sailed a ketch
|
By
smiles bernard
·
#34295
·
|
|
Re: [Amel Yacht Owners] Re: Mainsail furler - manual crank problem
Hello Bill,
This is what I did!
When Dan gave me a tour of BeBe, I saw the cozy and did jut that!!!
Sincerely, Alexandre
SM2K #289 NIKIMAT
Port de Plaisance de Gustavia, Saint Barthélémy,
Hello Bill,
This is what I did!
When Dan gave me a tour of BeBe, I saw the cozy and did jut that!!!
Sincerely, Alexandre
SM2K #289 NIKIMAT
Port de Plaisance de Gustavia, Saint Barthélémy,
|
By
Alexandre Uster von Baar
·
#34294
·
|
|
Re: [Amel Yacht Owners] Re: Mainsail furler - manual crank problem [1 Attachment]
All,
FYI, I believe that the seal on this unit receives significant UV damage because it is always exposed. When the seal is damaged, it leaks. If you have ever wondered why the inside of the winch
All,
FYI, I believe that the seal on this unit receives significant UV damage because it is always exposed. When the seal is damaged, it leaks. If you have ever wondered why the inside of the winch
|
By
Bill & Judy Rouse <yahoogroups@...>
·
#34293
·
|
|
Re: [Amel Yacht Owners] Repair
Paul,
I sent you a private email.
Best,
CW Bill Rouse
Admiral, Texas Navy
Commander Emeritus
Amel School www.amelschool.com
720 Winnie St
Galveston Island, TX 77550
+1(832) 380-4970
Paul,
I sent you a private email.
Best,
CW Bill Rouse
Admiral, Texas Navy
Commander Emeritus
Amel School www.amelschool.com
720 Winnie St
Galveston Island, TX 77550
+1(832) 380-4970
|
By
Bill & Judy Rouse <yahoogroups@...>
·
#34292
·
|
|
Re: [Amel Yacht Owners] Stainless steel springs & magnetism
Hi Bill,
Since you asked, the reason magnets stick to your stainless steel refrigerator is they use a thin sheet of stainless steel over a metal core that's more ferromagnetic - meaning a metal that
Hi Bill,
Since you asked, the reason magnets stick to your stainless steel refrigerator is they use a thin sheet of stainless steel over a metal core that's more ferromagnetic - meaning a metal that
|
By
Craig Briggs
·
#34291
·
|
|
Re: not enough RPM and only 6 knots with 2300
Hi all,
We have found now a sort of a solution for the missing performance.
Short history:
- we have changed the turbo charger and the exhaust pipe -> small positive effect
- we have cleaned the tank
Hi all,
We have found now a sort of a solution for the missing performance.
Short history:
- we have changed the turbo charger and the exhaust pipe -> small positive effect
- we have cleaned the tank
|
By
philipp.sollberger@...
·
#34290
·
|
|
Re: [Amel Yacht Owners] Re: Mainsail furler - manual crank problem
Excellent illustration Duane,
Thank you so much for sharing!!!
Sincerely, Alexandre
SM2K #289 NIKIMAT
Port de Plaisance de Gustavia, Saint Barthélémy,
Excellent illustration Duane,
Thank you so much for sharing!!!
Sincerely, Alexandre
SM2K #289 NIKIMAT
Port de Plaisance de Gustavia, Saint Barthélémy,
|
By
Alexandre Uster von Baar
·
#34289
·
|
|
Re: Mainsail furler - manual crank problem
Duane,
thank you for your fast Reply! I will change the Dust Cover make an Inspection. Thanks to you now I know the Part Number (NAK VA-45).
My one is leaking out of the screw at the left bottom (see
Duane,
thank you for your fast Reply! I will change the Dust Cover make an Inspection. Thanks to you now I know the Part Number (NAK VA-45).
My one is leaking out of the screw at the left bottom (see
|
By
Ralph Heilig
·
#34288
·
|
|
Re: Mainsail furler - manual crank problem
I'm not sure that grease is the right lubricant for these gearboxes.
Grease tends to get thrown off gear wheels and ends up solidifying in the corners of the gearbox casing. For the gears to be
I'm not sure that grease is the right lubricant for these gearboxes.
Grease tends to get thrown off gear wheels and ends up solidifying in the corners of the gearbox casing. For the gears to be
|
By
Alan Leslie
·
#34287
·
|
|
Re: Mainsail furler - manual crank problem
Hi Ralph,
I believe they should be greased, based on all the comments I've read here. To stop the oil leak you could replace the O-Ring on the black collar of the winch socket, but of course most of
Hi Ralph,
I believe they should be greased, based on all the comments I've read here. To stop the oil leak you could replace the O-Ring on the black collar of the winch socket, but of course most of
|
By
Duane Siegfri
·
#34286
·
|
|
Re: Mainsail furler - manual crank problem
Hallo Duane,
thank you for the great Photos! I have a similar Problem. My gearbox is leaking oil out of one of the (4) screws of the Winch Socket.
Also I lost (its broken) the "dust cover" on the
Hallo Duane,
thank you for the great Photos! I have a similar Problem. My gearbox is leaking oil out of one of the (4) screws of the Winch Socket.
Also I lost (its broken) the "dust cover" on the
|
By
Ralph Heilig
·
#34285
·
|
|
Re: [Amel Yacht Owners] First SM 2000 Hull Number
I think that M. Boucharlat made a typo. SM232 is built 1998.
Regards
Ann-Sofie at S/Y Lady Annila, SM 232 from 1998.
Skickat från min iPad
27 juli 2017 kl. 15:43 skrev 'Bill & Judy Rouse'
I think that M. Boucharlat made a typo. SM232 is built 1998.
Regards
Ann-Sofie at S/Y Lady Annila, SM 232 from 1998.
Skickat från min iPad
27 juli 2017 kl. 15:43 skrev 'Bill & Judy Rouse'
|
By
Ann-Sofie Svanberg <kanalmamman@...>
·
#34284
·
|
|
Re: [Amel Yacht Owners] First SM 2000 Hull Number
Hi Ryan,
Congratulations.
When you are in Huntington give me a shout .
We could get together. I am just across the harbor.
Fair Winds
Eric
Kimberlite Amel Super Maramu #376
Hi Ryan,
Congratulations.
When you are in Huntington give me a shout .
We could get together. I am just across the harbor.
Fair Winds
Eric
Kimberlite Amel Super Maramu #376
|
By
eric freedman
·
#34283
·
|
|
Re: [Amel Yacht Owners] considering purchase of SM #233 Monarae
By
Brent Cameron
·
#34282
·
|
|
Re: [Amel Yacht Owners] Repair
Hello Paul,
the access to the freshwater tank is not very difficult and there must be a topic talking about the inspection hatches as it is also the way you can clean the tank (didn't you clean your
Hello Paul,
the access to the freshwater tank is not very difficult and there must be a topic talking about the inspection hatches as it is also the way you can clean the tank (didn't you clean your
|
By
Beaute Olivier
·
#34279
·
|
|
Re: [Amel Yacht Owners] Stainless steel springs & magnetism
Craig, yes, but not exactly. I believe that you will find nothing on your Amel made of stainless steel that is totally and absolutely non-magnetic. But, OTH, every stainless steel refrigerator I have
Craig, yes, but not exactly. I believe that you will find nothing on your Amel made of stainless steel that is totally and absolutely non-magnetic. But, OTH, every stainless steel refrigerator I have
|
By
Bill & Judy Rouse <yahoogroups@...>
·
#34278
·
|
|
Re: [Amel Yacht Owners] Repair
Paul , Yes it is. Pat
By
Patrick McAneny
·
#34277
·
|
|
Re: Mainsail furler - manual crank problem
It's in the folder in Photos "Manual Furler Gearbox"
It's in the folder in Photos "Manual Furler Gearbox"
|
By
Duane Siegfri
·
#34276
·
|
|
Re: Mainsail furler - manual crank problem
I have posted a series of photos on disassembly of the manual furler.
After doing this I would urge you to take the mainsail gearboxes (manual and electric) out and grease the top bearing at least
I have posted a series of photos on disassembly of the manual furler.
After doing this I would urge you to take the mainsail gearboxes (manual and electric) out and grease the top bearing at least
|
By
Duane Siegfri
·
#34275
·
|