Thank you so much for this, Paul. I haven’t been very active on this group yet, but I was lucky to acquire SM#50 in the fall of 2017. I must admit the bowthruster has been quite a black box to me,

Hi Vic, You note you've got a West Marine (WM) nearby and Kevin said he used Defenders. I just did a bunch of replacements - WM was $7.29 for the Scandvik ABA 316 SS SAE10. A local FL store (Boat

Vic, You have some good questions and it will be interesting to read the input. I can tell that for myself I try to only use the Shields exhaust hose below waterline and always double clamp those

Thanks Stefan, Very helpful. I will look into Victron battery balancer. Kind regards Ross Sent from Yahoo Mail for iPad

Hi Ross, Appologies for the delay in answering, sailing to Datca now ;-) The manual is now on the forum under Files, Search, type "Dolphin" * suggest to ask D. for a manual of your 100A charger,

Thanks Kevin! This is extremely useful!! I'll be following all that advice. Thanks, - Vic

Hi Bill, Totally agree with you about Varta. Bought mine in Croatia 2 years ago and they are nearly finished. Absolute rubbish. We are full time on the boat and have been very careful with our

Ross and Donna, It is hard to say for sure. I had the same "non-changeable" Dolphin chargers on 2003 BeBe SM 387. In about 2007, I wanted to replace almost 4-year-old original Delco France Freedom

Thanks for sending this through Bill, it is very helpful. The 100amp charger that we have is the one in the first picture (JPG) that you forwarded. It does not physically have a switch. Does this mean

Ross and Donna It depends. Dolphin changed those chargers 3 times. First was no switch, then an A/B switch, then a selector switch with 10 different settings. Here are a few things that may help:

Hi Scott, You made me curious about this Microtik product. Having worked with Cisco's Router OS, I'm not so easily scared off by this stuff, but this must be the worst documented piece of hardware

I think it really depends on your use case. We are rarely in marinas and in some of the places we've been, mobile data is quite expensive and generally not truly unlimited. In Hawaii, anchored nearly

Thanks all for the replies. The code WEMA S2-1170F makes me think the sensor has a length of 1170mm which sounds about right for the given tank. A good tip about the poor power-supply to the sensor.

I replaced the sensor on Adagio and could not find an exact match (I forget the model number, but it was indeed on a label on the sensor). I wrote to Wema, they offered a couple of options and

Thanks Stefan, Can you please send the attachment. Kind regards Ross Sent from Yahoo Mail for iPad

I will second what Arno says about Marina wi-fi, I have an extender on the backstay, didn’t help with internet performance. Sure it gave me better wi-fi signal, but internet still sucked. After

Dear Nick My hull nr. is #18... As I bought the boat, I also had the 175A alternator and it was the same problem. There was also a package from Amel with a replacement to this alternator. Mastervolt

Hi Ross, Here is the French manual for the 30/50A charger Dolphin/ CATS POWER DESIGN send me. It has a switch "Gel"or "free". Hope this helps you, Stefan Jeukendrup svMalaka Queen SM2k #348 ~

Hi team, Can anyone advise if the Dolphin power 1 - 24v/100amp and 24v/30amp chargers can be programmed to accept Gel batteries. If not any advise on best charger set up to accept Gel batteries and

Hallo i ordert the Marine Onan RS 8 QD Model MDKBW It is a littel bit smaler and not so heavy but it has more rpm Cheers Heinz Am 19.08.2020 09:20 schrieb Elja Röllinghoff Balu SM 222 <Bijorka@...>: