Just as an option, if people are in a place they can not easily source the March pumps, here is the nameplate from the magnetic drive pumps we use on Harmonie. Our boat is an older model, so we have

I am literally in the same boat! I would love to know how to get a replacement machine. Porter McRoberts. Please excuse the errors. Sent from my IPhone Www.fouribis.com

Hi Alex, What's the problem with your washer? Mine wasn't working when I bought 2 years ago, it was the pump - replaced by myself, cost £30. Did it from the front, didn't have to take out the washer.

Dear Amelians, The washing machine on my AMEL54 needs to be replaced. The Bosch model used on my boat, doesn't exist anymore and I couldn't find a new machine with the exact same dimensions. Are there

Good morning flyboyscdswa Regarding the picture of the mystery part just posted: To me, it looks like the “Balancine” which hold the end of the boom Sincerely, Alexandre SM2K #289

We use a similar hose and even without the snap connector it has worked in places like Turkey (where pump outs are recorded electronically by Blue Cards). On our stand pipe for the Santorin which was

Hi Eric, I am very satisfied with the Marsh pump. Can send you all the details next Monday when I am back on the boat. Barry & Penny "Lady Penelope II" AMEL 54. #17 Marina di Ragusa. Sicily

Thanks Ben !

Eric, I installed this pump last year for AC salt water. Ben Driver La Bella Vita SM #3476S

I agree, the same applies when furling. Allowing the boom to rise when furling will lead to a jam up. Danny SM 299 Ocean Pearl

Another suggestion... With in mast furlers it is common to have the upper part of the sail fail to unroll if the boom is allowed to rise too high when unfurling. If you do not have a vang, try keeping

Eric, I changed mine.This is the pump the folks at Costal Climate recommended. You can save yourselfabout $100 if you buy it on eBay.

As always, THANKS you so much Bill!!! Sincerely, Alexandre --------------------------------------------

I saw that some people changed their AC water pump to a March magnetic drive pumps. What model was used. Does anyone know the specifications for the lift pump for the 160 LPH watermaker pump or a

Alex, It probably has a TNC connector on the end of the wire. It might be BNC, but I doubt it. Google TNC and you will see that the connection can be removed from the wire end. You may be able to

Good afternoon Bill, Thanks so much! I know exactly which one it is!!! Actually mine is on the angled bar that connects the 2 mizzen back stay (also where I have the sat phone antenna). The wire

Alex, You do not sound stupid! The Furuno GPA017 - GPS antennas look like a mushroom which is about 10cm round and 6cm high, The normal location is on the aft part of the port side rail, near the

Good afternoon Bill I hate to sound stupid, but where is located the antenna? I also lost boat data on the radar display (no longer indicate speed, etc.) I thought it was a loose connection, but may

Paul, The Amel has atank meter for the holding tanks. You can tell whenthe tank is full because you will see pee running down the deck when you flush thehead as it spurts out the vent hole in

Willem, The furlingdoes take a little bit of getting use to it. If you are trying to pull out thesail and it gets stuck at the top while coming out of the mast, the trick is toturn the furling