This is really great info. Will try all of this out! Thanks! -Vic "Moon Dog" SM248

Hello Arno; We replace the transmission oil and filter every year prior to the start of the season. I believe this is stated in the manual. Also, we fill the oil to the top (About an extra 2

Hello, thanks for help with my hatches. Are there any drawings for the C drive, and propulsion, with spare parts available? Were to buy the spare parts? Is there an Amel shop? mit feundlichem Gruß

Hello, thanks for help with my hatches. Are there any drawings for the C drive, and propulsion, with spare parts available? Were to buy the spare parts? Is there an Amel shop? mit feundlichem Gruß

Hello Arno, thanks for answering. Amel recomend every 2 years. I wanted to have the drawing for the propulsion, to give the engeneer in the shipyard some help mit feundlichem Gruß / best

I just uploaded the workshop manual for the engine transmission into the "/Files / Volvo Penta" section. I don't think there is a lot we can do about this thing ourselves as it needs lots of specialty

There are a number of other things for the passerelle. Attached to my starboard backstay is a tubular rod that swings down and goes into a ring welded to the starboard side of the passarelle.

YouTube link set up for the live stream included below ZOOM Meeting with Battle Born LiFePO4 Lithium Batteries When: Saturday, 8 August 2020 20:00 to 21:00 (UTC+00:00) UTC An RSVP is requested.

Aha! Thanks that makes perfect sense. Thanks for helping me figure that out!

Vic, On ours, the wheel side goes on the dock and the boat side has a short pole that goes into one of two available corresponding holes on the stern (one on deck and one on the top step). This

Hi, Can folks please link me to any resources in terms of actually attaching the passerelle to the stern? I've found a couple of photos, but mostly in the photos it seems as though folks are just

All, The Groups.io Email System for the Amel Yacht Owners Group will be OFF for maintenance for about 2 hours. When: 7 August 2020, 0600 UTC to 7 August 2020, 0800 UTC Description: Groups.io hosting

Hi Eloi, I did the same 3 years ago in Hyeres. ACMO plus German steel cable; till now no problem at all. Stay healthy Stefano N’EVEREST Super Maramu 185 Bocca di Magra Italy

When working on our D3-110I-rev. C engine, I discovered a shattered impeller. I hate that as it means you need to open the intercooler to get the remains of the impeller out of the system. Opening up

The following files have been uploaded to the Files area of the main@AmelYachtOwners.groups.io group. /Volvo Penta/Workshop manual D3-1x0I-ABC.pdf By: Arno

ZOOM Meeting with Battle Born LiFePO4 Lithium Batteries When: Saturday, 8 August 2020 20:00 to 21:00 (UTC+00:00) UTC An RSVP is requested. Click here to RSVP Description: If you are interested in

Ryan, Perfect. Thanks CW Bill Rouse Amel

Hi Bill, I've attached the one I made when I renamed our boat. The dimensions listed are in inches. Some SMs have a grab rail to port of the steps which might eat into this space, so keep that in

Does anyone have the measurements of the stern area of a SM for boat name and port. I lost the diagram I had. Bill