|
Re: [Amel Yacht Owners] New Owner - 1990 Santorin
Hello Alexandre,
Thank you. I'm currently in Abu Dhabi. The boat is in Langkawi and soon back to Phuket for some small work. Then I'll either resign from work and go to the boat or bring the boat to
Hello Alexandre,
Thank you. I'm currently in Abu Dhabi. The boat is in Langkawi and soon back to Phuket for some small work. Then I'll either resign from work and go to the boat or bring the boat to
|
By
tfortner1975
·
#29695
·
|
|
Re: [Amel Yacht Owners] sea wather from bow-thruster
Both good questions.
Here is my opinion. Henri Amel created a really good retractable bow thruster when there were none on the market. It went through several changes and updates in its 25+/- year
Both good questions.
Here is my opinion. Henri Amel created a really good retractable bow thruster when there were none on the market. It went through several changes and updates in its 25+/- year
|
By
Bill & Judy Rouse <yahoogroups@...>
·
#29691
·
|
|
Re: [Amel Yacht Owners] New Owner - 1990 Santorin
We asked for and received from Amel a wiring diagram by email for our 1991 Santorin based in Wellington. Helps if you understand French
John
We asked for and received from Amel a wiring diagram by email for our 1991 Santorin based in Wellington. Helps if you understand French
John
|
By
JOHN HAYES
·
#29694
·
|
|
Re: [Amel Yacht Owners] 30 Amp 125 volt shore power to 50 Amp 125/250 Volt plug?
Bill Kinney,
If anyone has need to use the Pigtail Shore Power Adapter, 30A 110-125V Male to 50A 125/250V Female, you will deliver 110VAC 60htz to the boat. That is the reason that I said Alex has no
Bill Kinney,
If anyone has need to use the Pigtail Shore Power Adapter, 30A 110-125V Male to 50A 125/250V Female, you will deliver 110VAC 60htz to the boat. That is the reason that I said Alex has no
|
By
Bill & Judy Rouse <yahoogroups@...>
·
#29690
·
|
|
Re: [Amel Yacht Owners] sea wather from bow-thruster
Bill,
Great analysis.
On the bow thruster for my 1987 Maramu, I have two large O-ring grooves moulded into the hole in the hull for the composite tube to slid and seal on instead of the lip
Bill,
Great analysis.
On the bow thruster for my 1987 Maramu, I have two large O-ring grooves moulded into the hole in the hull for the composite tube to slid and seal on instead of the lip
|
By
James Alton
·
#29689
·
|
|
Re: [Amel Yacht Owners] 30 Amp 125 volt shore power to 50 Amp 125/250 Volt plug?
Alexandre,
The short answer is that if your existing 50 AMP connector is wired with two hot wires to your 220 V system, then the connector you posted will not work.
Amel rigged my boat with two
Alexandre,
The short answer is that if your existing 50 AMP connector is wired with two hot wires to your 220 V system, then the connector you posted will not work.
Amel rigged my boat with two
|
By
Bill Kinney <greatketch@...>
·
#29688
·
|
|
Re: [Amel Yacht Owners] 30 Amp 125 volt shore power to 50 Amp 125/250 Volt plug?
Hello Bill,
Thanks for your time, but this was not my question.
I probably did not explain myself properly…
I know about the 4 wires, etc. on my 50 Amp 125/250 Volt. It bring power directly to my
Hello Bill,
Thanks for your time, but this was not my question.
I probably did not explain myself properly…
I know about the 4 wires, etc. on my 50 Amp 125/250 Volt. It bring power directly to my
|
By
Alexandre Uster von Baar
·
#29686
·
|
|
Re: [Amel Yacht Owners] 30 Amp 125 volt shore power to 50 Amp 125/250 Volt plug?
Alex, No, that will not help.
Without knowing what transformer you have and how it was wired...and if that wiring has changed, none of us can give you much input.
I suggest that before you arrive at a
Alex, No, that will not help.
Without knowing what transformer you have and how it was wired...and if that wiring has changed, none of us can give you much input.
I suggest that before you arrive at a
|
By
Bill & Judy Rouse <yahoogroups@...>
·
#29687
·
|
|
Re: [Amel Yacht Owners] 30 Amp 125 volt shore power to 50 Amp 125/250 Volt plug?
Alexandre,
My boat also has the transformer. and having just redone the power cord, I know in detail how MY boat was wired for the 125 volt inlet cord. This assumes that your existing cord with the
Alexandre,
My boat also has the transformer. and having just redone the power cord, I know in detail how MY boat was wired for the 125 volt inlet cord. This assumes that your existing cord with the
|
By
Bill Kinney <greatketch@...>
·
#29684
·
|
|
Re: [Amel Yacht Owners] New Owner - 1990 Santorin
Congratulations Trevor, where are you located?
Sincerely, Alexandre
SM2K #289 NIKIMAT
Club Nautico de San Juan, Puerto Rico
--------------------------------------------
Congratulations Trevor, where are you located?
Sincerely, Alexandre
SM2K #289 NIKIMAT
Club Nautico de San Juan, Puerto Rico
--------------------------------------------
|
By
Alexandre Uster von Baar
·
#29683
·
|
|
[Amel Yacht Owners] 30 Amp 125 volt shore power to 50 Amp 125/250 Volt plug?
Good morning,
The next marina I am going to is likely to only have 30 Amp 125 Volt.
Since I have never used my big transformer on the boat, I am not sure it works, so trying to cover options.
I need
Good morning,
The next marina I am going to is likely to only have 30 Amp 125 Volt.
Since I have never used my big transformer on the boat, I am not sure it works, so trying to cover options.
I need
|
By
Alexandre Uster von Baar
·
#29682
·
|
|
Re: [Amel Yacht Owners] Windlass bolt to deck
So I can agree that the cleanest final solution is likely to drill out the bolt and then drill through the fiberglass so that a bolt can be completely through with washer/nut on the end in the bow
So I can agree that the cleanest final solution is likely to drill out the bolt and then drill through the fiberglass so that a bolt can be completely through with washer/nut on the end in the bow
|
By
Mike Ondra
·
#29699
·
|
|
Re: [Amel Yacht Owners] New Owner - 1990 Santorin
Trevor,
I have a 1990 Santorin SN24. I don’t know what I have is that great of a manual, but it is something. Contact me off the Amel owners site and I will try to help. Also please post the boats
Trevor,
I have a 1990 Santorin SN24. I don’t know what I have is that great of a manual, but it is something. Contact me off the Amel owners site and I will try to help. Also please post the boats
|
By
Ric Gottschalk <ric@...>
·
#29680
·
|
|
Re: [Amel Yacht Owners] sea wather from bow-thruster
This is my guess:
When the "B.T. climbs higher and the pin enters without effort," the foam donuts are probably being distorted and water is passing through where the foam is distorted.
When the "BT
This is my guess:
When the "B.T. climbs higher and the pin enters without effort," the foam donuts are probably being distorted and water is passing through where the foam is distorted.
When the "BT
|
By
Bill & Judy Rouse <yahoogroups@...>
·
#29681
·
|
|
New Owner - 1990 Santorin
Hello All,
I have finally taken possession of a 1990 Santorin, formerly named AKWAABA. The previous family bought her new in 1990. Conducting a true turnover of the boat was not possible, due to
Hello All,
I have finally taken possession of a 1990 Santorin, formerly named AKWAABA. The previous family bought her new in 1990. Conducting a true turnover of the boat was not possible, due to
|
By
tfortner1975
·
#29679
·
|
|
Re: [Amel Yacht Owners] sea wather from bow-thruster
The bow of my boat is very high on the water level and the water enters in the boat only with waves.
I've done the maintenance and replaced 3 foam rings the springtime this year : two foam rings below
The bow of my boat is very high on the water level and the water enters in the boat only with waves.
I've done the maintenance and replaced 3 foam rings the springtime this year : two foam rings below
|
By
enio rossi
·
#29678
·
|
|
Re: [Amel Yacht Owners] Bilge / Sump pump
Bill, The original pump does look superior to the Jabsco that the previous owner installed on my boat , especially how the two halves are bolted together as opposed to a clamp on the Jabsco , which
Bill, The original pump does look superior to the Jabsco that the previous owner installed on my boat , especially how the two halves are bolted together as opposed to a clamp on the Jabsco , which
|
By
Patrick McAneny
·
#29677
·
|
|
Re: [Amel Yacht Owners] Windlass bolt to deck [1 Attachment]
Mike,
Danny's thru-bolt solution sounds good and the drilling, as he points out, will be the key to success. With the good amount of bolt you've got left above deck you may want to try removing it
Mike,
Danny's thru-bolt solution sounds good and the drilling, as he points out, will be the key to success. With the good amount of bolt you've got left above deck you may want to try removing it
|
By
Craig Briggs
·
#29676
·
|
|
Super Maramu Storage
The new owner of BeBe had some questions about storage. I prepared this some time ago, but thought it was appropriate to share with you. The cubic feet measurements are approximate. This is also at
The new owner of BeBe had some questions about storage. I prepared this some time ago, but thought it was appropriate to share with you. The cubic feet measurements are approximate. This is also at
|
By
Bill & Judy Rouse <yahoogroups@...>
·
#29675
·
|
|
Re: [Amel Yacht Owners] SM Volvo transmission cable adjustment
Thanks for the technical info. This Morse cable is 17 years old, with maybe 3500 hrs. Are their failure modes for the cable itself? Or maintenance (oiling)?
Mike Ondra
Aletes SM#240
Rock Hall, MD
Thanks for the technical info. This Morse cable is 17 years old, with maybe 3500 hrs. Are their failure modes for the cable itself? Or maintenance (oiling)?
Mike Ondra
Aletes SM#240
Rock Hall, MD
|
By
Mike Ondra
·
#29685
·
|