|
Re: SM2K Lewmar ST 58 winch ELS control box p/n 48000222
Here's a source for $370.95, (regular $616.70). I know absolutely nothing about them or the part, which seems to have a few "Types".
Caveat emptor and all that but send me 10% of the savings ;-)
--
Here's a source for $370.95, (regular $616.70). I know absolutely nothing about them or the part, which seems to have a few "Types".
Caveat emptor and all that but send me 10% of the savings ;-)
--
|
By
Craig Briggs
·
#54699
·
Edited
|
|
DST800 Thru-Hull Transducer / analogue as replacement for sonic sensor
I am investigating the possibility for using paddle speed transducer. There is Analog version of DST800 available. The specification are saying it is only for Raymarine ST60 but as I remember on my
I am investigating the possibility for using paddle speed transducer. There is Analog version of DST800 available. The specification are saying it is only for Raymarine ST60 but as I remember on my
|
By
Slavko Despotovic
·
#54698
·
|
|
Re: SM2K Lewmar ST 58 winch ELS control box p/n 48000222
Contact Roger Underwood at Nance and Underwood Rigging FortLauderdale.
954-764-6001
$616.70
Also called the "soft start" device, I sometimes see these in the same failure mode you describe on
Contact Roger Underwood at Nance and Underwood Rigging FortLauderdale.
954-764-6001
$616.70
Also called the "soft start" device, I sometimes see these in the same failure mode you describe on
|
By
amelforme
·
#54697
·
|
|
Forward looking Sonar - Amel 54 - Echopilot FLS 2D frequency vs B&G Sonic Speed Sensors or Depth Sounders
Dear Amelians,
thx a lot for your numerous helpful responses.
For the Amels with the Echopilot 2D units AND the B&G Sonic Speed Sensors and/or Depth Sounders (Standard on the AMEL 54):
Are there
Dear Amelians,
thx a lot for your numerous helpful responses.
For the Amels with the Echopilot 2D units AND the B&G Sonic Speed Sensors and/or Depth Sounders (Standard on the AMEL 54):
Are there
|
By
Stefan Schaufert
·
#54696
·
|
|
Re: Deck painting
Philippe
Merci
Andre
By
Kaplan,Andre
·
#54695
·
|
|
Re : [AmelYachtOwners] Deck painting
For the desk epoxy 2 composants SHERWIN- WILLIAM Company, colour SABLE ref SW6083. http://www.sherwin-williams.com
Or to renew the color polytrol at owatrol.com
For the "black" lines I use a striper
For the desk epoxy 2 composants SHERWIN- WILLIAM Company, colour SABLE ref SW6083. http://www.sherwin-williams.com
Or to renew the color polytrol at owatrol.com
For the "black" lines I use a striper
|
By
Philippe BELLOIR
·
#54694
·
|
|
A55#9
S/V A55#9
Seeking wiring diagrams for the double shunt and the 8 x AGM 160 V, 12 A batteries.
Stuart Hemingway
S/V A55#9
Seeking wiring diagrams for the double shunt and the 8 x AGM 160 V, 12 A batteries.
Stuart Hemingway
|
By
Stuart Hemingway
·
#54693
·
|
|
Re: Forward looking Sonar - Amel 54 - Furuno NavNet Plotter Network
Hello all,
I used to run a large catamaran that doubled as a survey vessel, we were looking for ancient ship wrecks. Mostly in shallow water. We worked in Asia and Mozambique among other places.
The
Hello all,
I used to run a large catamaran that doubled as a survey vessel, we were looking for ancient ship wrecks. Mostly in shallow water. We worked in Asia and Mozambique among other places.
The
|
By
ngtnewington Newington
·
#54692
·
|
|
Re: Forward looking Sonar - Amel 54 - Furuno NavNet Plotter Network
Ken and All,
I searched for one of the Echo Pilot 2D units (part #81034 with the bronze transducer housing) from US stores and found no stock. Also a statement on one website that said that the
Ken and All,
I searched for one of the Echo Pilot 2D units (part #81034 with the bronze transducer housing) from US stores and found no stock. Also a statement on one website that said that the
|
By
James Alton
·
#54691
·
|
|
Re: Forward looking Sonar - Amel 54 - Furuno NavNet Plotter Network
Gerhard,
Delighted to read your post and learn that Greece has such skills. Not always the way !
Ian
Gerhard,
Delighted to read your post and learn that Greece has such skills. Not always the way !
Ian
|
By
ianjenkins1946 <ianjudyjenkins@hotmail.com>
·
#54690
·
|
|
Re: Deck painting
Jose
Thanks again
Andre
By
Kaplan,Andre
·
#54689
·
|
|
Re: Deck painting
Andre
One coat - 1 liter it is enough, use a normal brush and wait at least 48 hours
There are only one color- transparent.
The original color must be restored by this kind of " varnish".
Make a
Andre
One coat - 1 liter it is enough, use a normal brush and wait at least 48 hours
There are only one color- transparent.
The original color must be restored by this kind of " varnish".
Make a
|
By
Jose Alegria
·
#54688
·
|
|
SM2K Lewmar ST 58 winch ELS control box p/n 48000222
Hello,
Hope this finds everyone doing well.
Having trouble finding a supplier with this part. This is for the portside large electric ST58 winch.
Does anyone have one for sale or know of a supplier
Hello,
Hope this finds everyone doing well.
Having trouble finding a supplier with this part. This is for the portside large electric ST58 winch.
Does anyone have one for sale or know of a supplier
|
By
Bob Ross
·
#54687
·
|
|
Re: Deck painting
Dear Andre,
in respect to the other examples you get, I would follow the procedure in the attached description.
Best
Arnold
SV Zephyr
SM203
Am 30.09.2020 um 15:52 schrieb Kaplan,Andre
Dear Andre,
in respect to the other examples you get, I would follow the procedure in the attached description.
Best
Arnold
SV Zephyr
SM203
Am 30.09.2020 um 15:52 schrieb Kaplan,Andre
|
By
Arnold Mente
·
#54686
·
|
|
Re: Deck painting
Jose,
Thank you.
Is there a particular color I need? How many coats should be applied? Any advice on how to apply? How long to wait for drying.
Andre
Jose,
Thank you.
Is there a particular color I need? How many coats should be applied? Any advice on how to apply? How long to wait for drying.
Andre
|
By
Kaplan,Andre
·
#54685
·
|
|
Re: Deck painting
Andre
Try first of all - POLYTROL
Don´t solve the cracks but improve the appearance.
regards
José Alegria
A55#003MERIT
josealegr@...
Mobile: + 351 91 866 30 37
Andre
Try first of all - POLYTROL
Don´t solve the cracks but improve the appearance.
regards
José Alegria
A55#003MERIT
josealegr@...
Mobile: + 351 91 866 30 37
|
By
Jose Alegria
·
#54684
·
|
|
Deck painting
To All
I have a 1988 Mango lying in Westbrook, CT. I’m considering repainting my deck, photo attached.
There are no discernible leaks associated with the cracks. What are my options for repainting
To All
I have a 1988 Mango lying in Westbrook, CT. I’m considering repainting my deck, photo attached.
There are no discernible leaks associated with the cracks. What are my options for repainting
|
By
Kaplan,Andre
·
#54683
·
|
|
Re: Forward looking Sonar - Amel 54 - Furuno NavNet Plotter Network
My pennyworth . We have had an Echopilot since new , 20 years ago . We very rarely use it .
However , in Chile we met a local guy with a wooden yacht who surveyed the canales in the south on behalf
My pennyworth . We have had an Echopilot since new , 20 years ago . We very rarely use it .
However , in Chile we met a local guy with a wooden yacht who surveyed the canales in the south on behalf
|
By
ianjenkins1946 <ianjudyjenkins@hotmail.com>
·
#54682
·
|
|
Re: Forward looking Sonar - Amel 54 - Furuno NavNet Plotter Network
Ian
I have had the same issue: EchoPilot 20 years old and display dead. Gracefully I was in Greece and able to send only the display unit to a repair company in Athen, Greece.
Within one week I got it
Ian
I have had the same issue: EchoPilot 20 years old and display dead. Gracefully I was in Greece and able to send only the display unit to a repair company in Athen, Greece.
Within one week I got it
|
By
Gerhard Mueller
·
#54681
·
|
|
Re: Forward looking Sonar - Amel 54 - Furuno NavNet Plotter Network
We had the Interphase unit on Elyse when we bought her in 2013. About a year later the transducer failed. I obtained a replacement from Garmin in the US who had just bought Interphase. That transducer
We had the Interphase unit on Elyse when we bought her in 2013. About a year later the transducer failed. I obtained a replacement from Garmin in the US who had just bought Interphase. That transducer
|
By
Alan Leslie
·
#54680
·
|