Thanks Eric. Sent you a message with order details. When these fail, go bad, or break, how do you know? Does it prevent the genset from starting/running? Or does it allow the genset to overheat if

Thanks Eric, Ive had two go bad in the last year. Please order three for me. We'll be coming down from Maine in late Sept. Will you be home then? Thanks. Kent & Iris Kristy SM 243

I have broken a few of these switches over the years. I have done this by reaching over the generator to retrieve something stored behind the genset. I received a quote from my Onan dealer and on

I took the stop off at the forward end of the track and undid the stanchion screws, then bent the stanchion out of the way and they just slid right off. Alan Grayson Sm 406 Ora Pai Sent from

How do they come off andgo on the track? With best regards, Mark Skipper Sailing Vessel - Cream Puff - SM2K - #275 Currently cruising - Tahiti, French Polynesia www.creampuff.us

Hi All, I have just bought new Antal Traveler Blocks for my Super Maramu. The reason I bought new ones is that a few older boats have experienced a few breakages and hopefully I will get to do a few

Here's an excellent you-tube video on gelcoat color mixing from Boatworks Today, a great blog that covers every aspect of fiberglass repairs. It works! It's a two part program, this is part

I agree. Even if you had the original color codes or even a container of the original material, it is not going to match the color of your boat today.

Thank you for your input Alexander, I received the exact info from Amel. Sounds logic to me when I think about it. -- Carina SV Ultimo Amel 54 No 165

Ji I received following answer from Maud at Amel. There is no RAL for the white color of the hull. The only solution is to use a spectrometer and try to find the most approaching tone locally. --

Hi Alexander, I notice in your tag line you sign off with “the first gold line” (Amel 54). Other than updated cosmetics, is there any difference between that and previous Amel 54’s (i.e. like

Hi Carina, did know Bruno, the former owner of ULTIMO, a bit, I have had a berth next to him in La Rochelle, and I have spied some good ideas he had had on equipment :-). Below you find the original

Hello. I have lost the 8 rivets that hold the genoa roller to the grey piece to handle it manually when disengaged from the furler engine. I don't know how to replace them :-( Any idea of where to

Thank you all for the excellent advice. I have found and solved the problem... It was the Bowthruster after all. A build up of carbon dust from the brushes on top of the commutator bridged up to the

Hello All, We are attending Cruisers University and possibly the Sailboat Show in Annapolis, MD early October. Was wondering if others were planning to attend, and might there be an opportunity to get

Hi Pat, Bill Hall, looking to be an Amel owner. Do you plan to leave the rub rail die with the vender? You could also place it with Bill Rouse. Future rub rail orders could contribute for using

Hi Bill...wow that was fast, thanks for your quick help mit feundlichem Gruß / best regards Roman Lawrence Schüruferstraße 202a 44269 Dortmund / germany Email: roman.lawrence@... Tel: 0049 (0)231

Hello, Main mast top to the wirebox above front aisle door is exact 20 meters. From there you find a cable canal to the nav table. Oliver from Vela Nautica Amel54#39 Martinique

Hi Roman, I have three different sources for the data you requested. You can choose which one is best for you. Probably the 1 Meg file with pictures is the best. Regards Bill Shaproski S/V Pacific

Hello, does anybody have a table of running rig for the Super Maramu 2000, with all lenght and diameters. That would be a great Help for me best rerards Roman