Charlie and Heather, you came to see us on Friday. I dont have any contact details for you. Can you contact me on simms@... Danny SM 299 Ocean Pearl

I'll take one. Bob Rossi, KAIMI SM 429

OK got it.

Reminder: ZOOM Meeting with Battle Born LiFePO4 Lithium Batteries When: Saturday, 8 August 2020, 20:00 to 21:00, (GMT+00:00) UTC An RSVP is requested. Click here to RSVP Description: If you

Hi Jamie, I think this is now a personal message? Anyway to avoid issues with the forum I think its better to discuss the technical details via Email. Please contact me under

I really hate to do this, but I am going to limit the number of posts to this thread to 15 total. Jamie, you and Oliver are halfway there and all of your posts are more or less brainstorming between

Hi Mike I just went through the similar fix on SM207 We cut away the bottom half of the discharge funnel to be able to remove the stupid hose. Then we glassed in a fiberglass round tube, and

Oliver, are you going to market and produce the custom board you show in your video? If you can help me better understand what you are saying, I am assuming the following: You developed and have

Thanks Oliver. Yes, I did see your posting, but I did not see any details about the controller you built. Appreciate the tip about the ADUM and the reliability issues. I am looking but cannot find

Hello Jamie, You found this post about integrated motor controller? https://velanautica.org/why-do-we-need-an-electronic-speed-controller-esc/ That includes all what is needed, no more VESC and an

Oliver, I forgot to mention that the motor I bought is the H6368 190KV, which was I believe your original recommendation. That has a 10mm D-shaft, and we need an 8mm D-shaft. So I need to order an

Agree about the motor back-fire possibility. I will be using a MOSFET to prevent that, and carry a few spare systems - they are cheap to build. Plus, as you no doubt understand, systems will develop

We're in Porto Turistico di Roma since 7 years and very pleased with the vicinity of the most beautiful town of Rome, and the airport of Fiumicino. For servicing the boat we use the shipyard located

Hi Jamie, I forgot to mention, if you wotk the VESC with an Arduino u need mandatory an isolater in between. It might burn the Arduino as they are on differen potentials. Or the motor fires back in

Hi Jamie, Good to hear u make progress. What motor did u get? I use now different motors than in the start. With improved bearings. I use now also stronger motors of my own custom order but still

By now most are familiar with the problems many of us have experienced with the Flojet/Frigoboat refrigeration water circulation pumps. Several of us who have Amel 54's have noted the very short life

I Jose, Generally I Leave my Santorin in Cala Galera or on the river in rome in Nautilus Marina. Very professional and one of the best restaurant in Rome. Near airport too. You can get a quote calling

Hi José, on Elba Island I recommend following yards for winter storage. Very Professional services, but not only a

Dear Amellians I need advice from a marina between Livorno and Rome to leave MERIT during the winter period. Ideally a marina that has a nautical community during the winter period. Kindest

That should read “Diamond Hole Saw”!!!!!!