Hi Alan, I could be interested. Are the springs that hold the blocks up all working i.e. not broken? Have you ever taken the long pin out ? What's the condition of the plastic slides that bear on the

Mohamed, Are you in the USA? If you are I will order them for you. We will figure out payment when they are in my hands.. Fair Winds, Eric

Mike, These are simple thermal switches. They are normally closed. If the circuit opens up the genset stops. My problem is sometimes they burn out and other times I hit the switch and it

Kent , will do. Fair Winds, Eric

Hello Our SSB Antenna comes in 2 parts. The threading that connects them has gotten loose and we would like to find away to secure them that doesn’t impact the transmission. Has anyone had this

Hello, Any routine maintenance tips for the holding tanks drain seacocks? Ours are starting to grip. Thanks Soraya Garulfo A54-122 Tahiti

Hi Eric; Thanks for sharing the information and your offer to accommodate the group purchase. I’d like 3 of them, if possible. Please let me know how to pay. Happy Sailing;

Thanks Eric. Sent you a message with order details. When these fail, go bad, or break, how do you know? Does it prevent the genset from starting/running? Or does it allow the genset to overheat if

Thanks Eric, Ive had two go bad in the last year. Please order three for me. We'll be coming down from Maine in late Sept. Will you be home then? Thanks. Kent & Iris Kristy SM 243

I have broken a few of these switches over the years. I have done this by reaching over the generator to retrieve something stored behind the genset. I received a quote from my Onan dealer and on

I took the stop off at the forward end of the track and undid the stanchion screws, then bent the stanchion out of the way and they just slid right off. Alan Grayson Sm 406 Ora Pai Sent from

How do they come off andgo on the track? With best regards, Mark Skipper Sailing Vessel - Cream Puff - SM2K - #275 Currently cruising - Tahiti, French Polynesia www.creampuff.us

Hi All, I have just bought new Antal Traveler Blocks for my Super Maramu. The reason I bought new ones is that a few older boats have experienced a few breakages and hopefully I will get to do a few

Here's an excellent you-tube video on gelcoat color mixing from Boatworks Today, a great blog that covers every aspect of fiberglass repairs. It works! It's a two part program, this is part

I agree. Even if you had the original color codes or even a container of the original material, it is not going to match the color of your boat today.

Thank you for your input Alexander, I received the exact info from Amel. Sounds logic to me when I think about it. -- Carina SV Ultimo Amel 54 No 165

Ji I received following answer from Maud at Amel. There is no RAL for the white color of the hull. The only solution is to use a spectrometer and try to find the most approaching tone locally. --

Hi Alexander, I notice in your tag line you sign off with “the first gold line” (Amel 54). Other than updated cosmetics, is there any difference between that and previous Amel 54’s (i.e. like

Hi Carina, did know Bruno, the former owner of ULTIMO, a bit, I have had a berth next to him in La Rochelle, and I have spied some good ideas he had had on equipment :-). Below you find the original

Hello. I have lost the 8 rivets that hold the genoa roller to the grey piece to handle it manually when disengaged from the furler engine. I don't know how to replace them :-( Any idea of where to