We had an EchoPilot on our SM until it died two years ago. We wanted to replace it and talked with all the major electronics manufacturers, none of whom seemed enthused by the technology. So we have

Ken, Did you know that they have a video of Aquarius on the Echo Pilot website? It is right under the "Get Quote" button on this page: https://echopilot.com/products/fls-2d/ - Justin Hopeful future

Craig , I was just reading that page this morning,yet elsewhere they suggest a min. of three coats of Rustlok. The Petit tech guy this morning said that I don't need to use a barrier coat ,but it

Jean-Pierre! What transducer did you choose, I though Raymarine was mor for fish finding? Paul on SY Kerpa SM#259

Ken, I was originally thinking of something that would interface with my B&G display but I think that you make a really good point about having a stand alone system in this case. It helps a lot

Hi Ken, Good to see your usage of FLS is like mine; like everything else electronic, what is really needed? I have hit the reef twice; lightly in both cases... in Fiji. First time was in a buoyed

You may find this a good read: https://www.pbo.co.uk/gear/5-forward-looking-sonar-tested-29321 With bestregards, Mark Skipper Sailing Vessel- Cream Puff - SM2K -

Hello James, I like the fact that the Echo Pilot is completely separate from the rest of the navigation equipment. I would like a radar overlay on the chart plotter, but not the FLS. You can spend

Hello Gang, When I decided to integrate an FLS, I chose a Raymarine unit. Integrates perfectly with the rest of the electronics and displays on either of my 2 plotters. Additionally, having sailed in

Phillipe, The bumper is held in place by four (4) M8 bolts that are molded into the bumper. You can see the four mounting holes for the bumper bolts in the picture below: You access the nuts from

Ken, A great educated/ personal review of FLS. Your logic concerning the value and useage of FLS seems sound to me. This is timely as I am looking at adding FLS to our boat. Recognizing that

Thank you Arnold. Slavko

Thank you Jeff, Early this year my Onan generator was giving trouble and I thought that it might be the PCB, it was the 2 relays which I changed. I have ordered from your supplier so now Arkansas

Thanks John Looks like a vetus ftr1320, confirming with Amel before ordering.

Eric, I'll call you this week

Dear all, I came across interesting messages on how to treat and repaint the bumper. I plan to do this in the near future but would like first to take it off. Could one of you advise on the steps

Z and I have sailed a fairly good distance on Aquarius, and we touched the reef one time... And that was when I didn't follow the guidance of my FLS. All the maps said 2.5M, and we were at high

Thank You so much!!! Am 28.09.2020 um 20:53 schrieb Ryan Meador <ryan.d.meador@...>: On our boat, they're 8mm. I used this LED to replace the pressure water indicator and it worked great. Ryan and

Hi Pat, Regarding your keel blasting and refinishing, I'd recommend you review Joel's "classic" post #2960 (and 2964 and 2116). (Just type the number in the "Msg #" box above.) Plus you could review

The bottom of my keel is going to be sand blasted in a few day,I will immediately apply several coats of Petit Rustlok ,followed by several coats of barrier coat and then a couple of coats of bottom