Thanks Craig, We are guests at the City Island Yacht Club but enjoyed visiting the Harlem Yacht Club restaurant when we were here last year. It is a great club. If they open up for outdoor dining

BTW, to those who may want to help Billie, but have earlier models: Amel 55 #56 has the Climma Chiller System, which is probably unlike the very early 55's and all Amel's before Amel started using the

Hallo Porter Are you still in New Zealand? Wehre are you shipping to? Can you contact me heinz @quetzal.berlin. Maybe I will do the same.iff they do not open the borders. Cheers HEINZ Sm2000, 292 in

Billy, I have had the same symptoms, and think I have resolved mine. I found that the power leads going into the sealed compressor unit were just a little loose. I am not on the boat now to look

Settling in to our new (to us) Amel 55#56. Twice now, the AC compressor has shutdown, no lights, like dead. Air handlers still work, boat is on shore power (US waters, boat is Euro 220v). All systems

Stuart, I was not aware my boat had two shunts and I’m away from the boat so cannot check. But have you asked Amel (Thierry Billard - sav@...) or better yet, Stéphane at Pochon ( stephane@...)?

Thank you Bill! It’s the 160 L Stefan

Which model Dessalator water maker? The D160 is about 14 amps of 230 volt. Bill

You might want to follow this recommended process when emailing SAV. Ordering Parts from Amel.pdf

Hi Paul, No, we left at the turn of the century to go cruising. Now in FL when not cruising. Hanging here for Covid wait. Craig Just saw the HYC restaurant is not reopened, but has fantastic take

Hi together! Is there anyone who knows about the HP pump electric consumption? I can’t find nothing in the technical data sheet from Dessalator and any type label on the motor. Thank you Stefan and

Such a bummer Paul thanks for sharing Cheers Courtney

Maxime PELLERIN has been responsive to my emails and is shipping parts this week. -- Kevin and Elise Fox SM404 Rascal Charleston, SC

Craig, Are you still located in NY? Eric

I am waiting for a response too. I don’t think Maud is back at work yet, but Maxime completed an order for me which had been on hold from before lockdown. I think they are under pressure with a

Maud is on vacation, However Thierry is working in the parts department. I communicated with him today. Fair Winds, Eric m 376

Mi Marco, I assume you have the new common rail electronic yanmar. What is the model number? is it 4jhlte as in your note. What model Amel do you have and the hull number? I might be able to help

Today is Bastille Day. Good chance Amel is closed. With bestregards, Mark Skipper Sailing Vessel- Cream Puff - SM2K - #275 Currentlycruising - Tahiti, French

Does anyone on the forum know whether Amel is open for business at the moment, or on summer holidays. I have emailed Maud at sav@... for availability for some parts and have had no

Bill thanks for your answer. we are aware of the problem and our mechanic as well. All the engine frame and the head of C transmission are connected to the ground cable. The issue now is that the