Glad to hear it all worked out. Steve

Thanks for sharing Bill !!! Excellent work with the pictures!!! Alexandre --------------------------------------------

Thanks Steve, Bill, Mark and James (did I miss anyone? !). Last night we doused the underside of the collar and bolt holes with PB Blaster and WD40. This morning the marina machine shop fixed the the

Hey :). Looking for some input on what might be a smaller job but I want to see if it's been explored before. At the helm I felt a good sized 'click' in the wheel when making a large steering change.

Mine are on the port side under the berth attached to the aft side of the chain locker's watertight bulkhead. There is a small panel that separates them from the air conditioner. Kent SM243 Kristy

I just replaced the aft head ball-valve for the holding tank drain. The process is documented

European and most of the TVs made for the rest of the world do not work in the USA. When the USA changed to HD it adopted a format of ATSC broadcasting and therefore you need a TV with an ATSC tuner.

Your TV probably only receives the PAL system used in Europe and many other parts of the world. The USA uses NTSC 3.58, and to my knowledge, their is no converter available, and you will need a

Hi Ian, Sorry you are having all the problems with the bow thruster. I helped a good friend overhaul his bow thruster last winter in St Martin. In his case, it had not been serviced for who knows how

Thanks Bill To be fair on the engineer I had removed the lower and upper plates before I gave it to him - but it looks increasingly like the wires need to be moved through 90 degrees. Andrew

Hi Paul whow you can get 8.3 A continious during lets say 10 h in Greek with the Emek Solar installation. This is your calculation with 2.05 KWh/ day. and how you can dived kwh/day ??? Hours/day???

Vi säljer Lady Annila, Amel Super Maramu 1998 Vi säljer Lady Annila, Amel Super Maramu 1998 For English, se below the pictures. Vi har beslutat oss för att ta

I have a much older model than you, but my wires come out the port side of the motor. Bill Kinney SM#160 Harmonie Highlands, NJ

Thanks Alexandre No hurry I cannot do anything for a few days because of my own work commitments. I need someone to put their hand behind the motor and see if the wires come out the port or starboard

Can you find your answer looking at the pictures on: http://nikimat.com/bow_thruster_overhaul.html I am super short on time, about to go to dentist appointment, then grocery shopping, etc. If it

Too late now, but you should have purchase a Multi System TV (Pal, Secam and NTSC). My TV and DVD/Blue ray readers are all Multi system as well as 50/60 hertz. Make sure your TV is capable of

I looked and I think mine are at the same place... I did not follow the wire (short on time because of work), but unless they are other solenoids, mine are there. Sincerely, Alexandre SM2K #289

We ordered the Samsung Smart tv on our new 55. It worked well in La Rochelle but gets no tv signal in US despite a large antenna. What kind of adapter or converter box will make it work? Thanks

Yes Andrew, you have the bow-thruster located in a watertight compartment, not allowing a watertight duct for the cables, but I think on Kent's (and most probably on all the SMs that don't have a

Hello Ian and Judy We have 450 W fitted by Emek. On Average in June we got 2.05 KWh/day, which I convert to about 83 Ah a day. We have been in the Ionian the whole of June. The lowest reading was 0,97