Good morning Fred, First thanks for the thank you and the compliment! Makes my day!!! Yes my SM2K came with a box (not sure it is original or not) that allow to carry smaller 2 diving tanks (the

Bula Fred, We have our bottles in the stbd fwd locker.....I'll post a pic tomorrow. Our Bauer compressor is in the port cockpit locker...also pic tomorrow.... Cheers Alan Elyse SM437 Vuda Marina, FIJI

Hi Alexandre, Thanks a lot for your very extensive and precise report about the Bauer install (and all of the reports about Nikimat ;-). I'm currently making it following your useful pictures and

Sorry, pressed send too quickly. This was from Mike Ondra Aletes SM#240 Rock Hall, MD

It worked. Bill Rouse BeBe Amel 53 #387 Sent from my tablet +1832-380-4970 USA Voice Mail

Hi, I like your practical style. Well done Danny SM 299 Ocean Pearl Currently Opua NZ preparing for Fiji

QUESTIONS We notice that the engine is quite stationary trough wide RPM range when transmission not engaged. When moving under power, the engine/c-drive assembly vibration/oscillation seems to be in

test

Thanks, Will. Those look identical to the Metalastik Cushyfloat mounts on my C drive. The HY150, being Vetus' load rating of 150kg, matches the Metalastic 45 rating. That is 150 kg for installations

As a fan of Formula 1, I look at the Daniel Ricardo interview (in Monaro) and you can see a Super Maramu at the marina !!! Here is the direct link:

On my SM they are Vetus HY150. Will Anni Bea True At anchor in Annapolis

Much smaller tube, there is not much space in there. Cheers Alan Elyse SM437

Merci beaucoup! Kent

Thanks a lot for this information.

The twilight zone--

Thanks Olivier, I' ll do what you tell me. Question : AC earth are (on the Santorin) the yellow-green wires that are connected on the engine? Those of the bonding system? Regards Enio

Yep. Smaller tube. Jean-Pierre Eleuthera SM 007

JPG, This sounds like a really useful pump to aboard. I will look into ordering one. James Sent from Samsung Mobile

Merci, Jean-Pierre, That sounds like a useful bit of kit. I must now decide what to leave ashore to make space for it ! Ian and Judy, Pen Azen, SM 302 Ithaca

I have a hand pump with a 7mm OD suction tube. I've tried threading it down into the windlass and can't get it to the oil. What is the trick? Smaller tube? Thanks Kent