I will check out those condensers. I just don't know how generator can shut down without throwing a breaker? Ben Driver La Bella Vita CG #1120066 SM #347

Eric I'm pretty sure unit draws 15 amps so at startup maybe 25 momentarily .. Not enough to throw a breaker, but breakers ar never thrown . Generator just shuts down. Ben Driver La Bella Vita CG

There is a salt water feed sea cock to the forward head. That hose can leak and the old hose clamps fail with time. Fair Winds Smooth Sailing To All Capt Richard RP Yacht Brokerage Newport RI We

Kent, Do you want to pipe in here Fair Winds Eric Kimberlite Amel Super Maramu #376

Good afternoon everybody. I replaced the old battery charger TECSUP with a more powerful Sterling. This has a screw on the casing wich I believe will serve to be connected to the earth of the boat.

I would check the capacitors on the high pressure pump. That’s my best guess- unless there is a short in the motor or wiring.

No. Only that generator shuts down Ben Driver La Bella Vita CG #1120066 SM #347

Ben, OK, you know how difficult it is to diagnose something by email, but, I will risk being wrong: Your problem is centered around the High Pressure pump motor. I am going to guess that the pair of

Do you know how much current the water maker is drawing just before it shuts down? Fair Winds Eric Kimberlite Amel Super Maramu #376

Dessalator 160 causes generator to shutdown but no breakers thrown. I can run all - 3 airs, charger, washer - simultaneity. But when Dessalator is turned on generator shuts down. No breakers on

Ian, Several years ago I bought a spare Actuator, Governor fir the Onan because I believe the only way to check if you have a problem is to replace it. If you were here, well you know!. Also, when

When did you last change the fuel filter on the ONAN ? That could be the problem..... Cheers Alan Elyse SM437

You can use a small hand pump with a small dia. tube to extract the oil via the filling cap. It takes 500 ml of 90 grade oil....there is a sight glass on the front of the windlass where you can see

Hi Ian, Windlass-You remove the fill cap and use a hand pump to remove the old oil. The oil is SAE 90-140, .5 liters as per the attached link.

I want to change the oil in my Lofrans. How can you drain the old oil ? How much to refill -- can you overfill the oil reservoir ? Ian and Judy, Pen Azen, SM 302, Greece

Hi all, My 7 KW Onan, reliable for 16 years with about 5,000 hours on it, has developed a fault with ( we think) the speed control. This is the part of the engine which governs the

Hi Bill, Thanks for the advice. I did use the halyards. One to support the furler extrusion and one to pull the mast forward. In the age of the iPhone I took some images to help with the reinstall. I

Hi Craig, Thanks for that. The wire in the railing goes through the tensioner…… :( I have it all off now and the furler is on the bench with the gearbox awaiting surgery…. Just need to get it

Hello Vladimir, There is an excellent source of information here... http://coxengineering dot sharepoint dot com/Pages/Anchoring.aspx Jean-Pierre Germain SY Eleuthera, SM 007

Thanks John. We will be at your shop on Thursday at 11am. Look forward to meeting you. Cheers, Warren and Zetta Sent: Monday, 30 May 2016 12:38 PM To: amelyachtowners@... Subject: