|
Re: New Thread on A54 fridge pumps (ATTN: OLIVER Vela Nautica)
Bill,
That's a nicely packaged set. I like the fixed leads which makes Porter's task easier.
I am 99.9% certain that they will work just fine as you describe.
The 0.1% risk: I could not find any
Bill,
That's a nicely packaged set. I like the fixed leads which makes Porter's task easier.
I am 99.9% certain that they will work just fine as you describe.
The 0.1% risk: I could not find any
|
By
Dean Gillies
·
#53124
·
|
|
Stove igniter replacement
I previously had a source for the exact replacement of the igniter for Eno stoves needing 6 outlets (4 burners + 2 oven burners).
If you are adventurous and want to try something with little risk, let
I previously had a source for the exact replacement of the igniter for Eno stoves needing 6 outlets (4 burners + 2 oven burners).
If you are adventurous and want to try something with little risk, let
|
By
CW Bill Rouse
·
#53123
·
|
|
Re: New Thread on A54 fridge pumps (ATTN: OLIVER Vela Nautica)
Thank you Bill.
That makes it very clear. Time to head to one of my favorite spots: McDonalds Hardware.
Appreciated!!
Porter
A54-152.
Excuse the errors.
Sent from my IPhone
Www.fouribis.net
Thank you Bill.
That makes it very clear. Time to head to one of my favorite spots: McDonalds Hardware.
Appreciated!!
Porter
A54-152.
Excuse the errors.
Sent from my IPhone
Www.fouribis.net
|
By
Porter McRoberts
·
#53122
·
|
|
Re: Is there a valve for the water intake for the washing machine?
Hi Bill and Kent.
SM 299 has a shut off valves for both the washing machine and the dishwasher below and behind the stove.
Regards
Danny
SM 299
Ocean Pearl
Mangonui New Zealand
Hi Bill and Kent.
SM 299 has a shut off valves for both the washing machine and the dishwasher below and behind the stove.
Regards
Danny
SM 299
Ocean Pearl
Mangonui New Zealand
|
By
Danny and Yvonne SIMMS
·
#53121
·
|
|
A 55 # 9 : Chargeing and mastershunts
Can anyone advise why there are two 500A Mastershunts installed at the outset.
We see that only one Mastershunt is configured and visible on the monitor.
The second does not appear to be visible
Can anyone advise why there are two 500A Mastershunts installed at the outset.
We see that only one Mastershunt is configured and visible on the monitor.
The second does not appear to be visible
|
By
Stuart Hemingway
·
#53120
·
|
|
Re: Is there a valve for the water intake for the washing machine?
Kent,
I purposefully said, "Later model SM2ks had the following (photo from the Users Manual)"
I have no idea when the cut-off valve was added by Amel, but I have seen some SMs that did not have
Kent,
I purposefully said, "Later model SM2ks had the following (photo from the Users Manual)"
I have no idea when the cut-off valve was added by Amel, but I have seen some SMs that did not have
|
By
CW Bill Rouse
·
#53119
·
|
|
Re: New Thread on A54 fridge pumps (ATTN: OLIVER Vela Nautica)
Porter,
According to Frigoboat, the pump selected should move at least 6 liters/min. A 24-volt pump rated at 12 liters/min. running half speed on 12 volts will pump about 6 liters/min.
I am not the
Porter,
According to Frigoboat, the pump selected should move at least 6 liters/min. A 24-volt pump rated at 12 liters/min. running half speed on 12 volts will pump about 6 liters/min.
I am not the
|
By
CW Bill Rouse
·
#53118
·
|
|
Re: Is there a valve for the water intake for the washing machine?
Along the same lines, I had a sink faucet fail last year, and had no way to shut water off to one faucet. On my list is to put a shutoff valve on every faucet. I didn't know there was a shutoff
Along the same lines, I had a sink faucet fail last year, and had no way to shut water off to one faucet. On my list is to put a shutoff valve on every faucet. I didn't know there was a shutoff
|
By
karkauai
·
#53117
·
|
|
Re: New Thread on A54 fridge pumps (ATTN: OLIVER Vela Nautica)
Hi Scott,
Yes, it does seem a bit counter-intuitive that warmish water is more efficient than cold water. Here is a paraphrase from my system's technical manual that may help in understanding it.
The
Hi Scott,
Yes, it does seem a bit counter-intuitive that warmish water is more efficient than cold water. Here is a paraphrase from my system's technical manual that may help in understanding it.
The
|
By
Craig Briggs
·
#53116
·
Edited
|
|
Re: Hardtop for Amel 54
Hi Mohammed,
Thank you for the info, Unfortunately I will not be going to the US for some time. My thoughts are that we are going to be here for some time. I really like the hardtop on Caduceus, I
Hi Mohammed,
Thank you for the info, Unfortunately I will not be going to the US for some time. My thoughts are that we are going to be here for some time. I really like the hardtop on Caduceus, I
|
By
Barry Connor
·
#53115
·
|
|
Re: Hardtop for Amel 54
Hi Barry;
Caduceus’ hard top was made in Norfolk West Virginia.
What did you think of the Emek installation? Do you know if it was insulated and how it has performed so far?
Happy
Hi Barry;
Caduceus’ hard top was made in Norfolk West Virginia.
What did you think of the Emek installation? Do you know if it was insulated and how it has performed so far?
Happy
|
By
Mohammad Shirloo
·
#53114
·
|
|
Re: Hardtop for Amel 54
Hi Scott,
Thank you for the photo.
I am going to see them on Wednesday when everything reopens here after this holiday weekend. I do hope that your price is not correct.
My current Bimini is an all
Hi Scott,
Thank you for the photo.
I am going to see them on Wednesday when everything reopens here after this holiday weekend. I do hope that your price is not correct.
My current Bimini is an all
|
By
Barry Connor
·
#53113
·
|
|
Re: Hardtop for Amel 54
I wonder if they would do a volume discount?
Bill is this an Amel School possibility?
Cheers
Courtney
svTrippin
54 #101
Brunswick
I wonder if they would do a volume discount?
Bill is this an Amel School possibility?
Cheers
Courtney
svTrippin
54 #101
Brunswick
|
By
Courtney Gorman
·
#53112
·
|
|
Re: Hardtop for Amel 54
This one was done by Manu at Alize Composites in Le Marin.
I think he said 25-30k euros.
--
Scott
2007 A54 #69
SV Tengah
http://www.svtengah.com
This one was done by Manu at Alize Composites in Le Marin.
I think he said 25-30k euros.
--
Scott
2007 A54 #69
SV Tengah
http://www.svtengah.com
|
By
Scott SV Tengah
·
#53111
·
|
|
Re: New Thread on A54 fridge pumps (ATTN: OLIVER Vela Nautica)
HI Craig,
I'm a little surprised that you're stating that our water cooled Danfoss refrigeration systems perform optimally with water temps above that which we experience in the tropics. That begs the
HI Craig,
I'm a little surprised that you're stating that our water cooled Danfoss refrigeration systems perform optimally with water temps above that which we experience in the tropics. That begs the
|
By
Scott SV Tengah
·
#53110
·
|
|
Re: Is there a valve for the water intake for the washing machine?
Thank you Bill,
I found the valve behind the cleaning stuff. I did not expect it on this side,but must admid that I failed to consult the manual.
Anyway, the problem is solved (also with the water
Thank you Bill,
I found the valve behind the cleaning stuff. I did not expect it on this side,but must admid that I failed to consult the manual.
Anyway, the problem is solved (also with the water
|
By
Willem Kroes
·
#53109
·
|
|
Re: Hardtop for Amel 54
The nicest one I’ve seen is on the Amel 54 Soleil Bleu. It looks like it could have come out of La Rochelle.
https://www.youtube.com/watch?v=DT7x0SjM648
Brent--
Brent Cameron
Future Amel Owner &
The nicest one I’ve seen is on the Amel 54 Soleil Bleu. It looks like it could have come out of La Rochelle.
https://www.youtube.com/watch?v=DT7x0SjM648
Brent--
Brent Cameron
Future Amel Owner &
|
By
Brent Cameron
·
#53108
·
|
|
Re: Hardtop for Amel 54
Thanks Barry;
I got permission from the previous owner of Caduceus A54 #56 to share the pictures of his hardtop. The following is the link to the pictures.
Thanks Barry;
I got permission from the previous owner of Caduceus A54 #56 to share the pictures of his hardtop. The following is the link to the pictures.
|
By
Mohammad Shirloo
·
#53107
·
|
|
Re: Hardtop for Amel 54
Hi Mohammad,
2 more photos of the raised boom line. My goal was to get it as high as possible, my Bimini bows are not bent much in the middle.
Best
Barry😀⛵️
Hi Mohammad,
2 more photos of the raised boom line. My goal was to get it as high as possible, my Bimini bows are not bent much in the middle.
Best
Barry😀⛵️
|
By
Barry Connor
·
#53106
·
|
|
Re: Cutting the main instrument display acrylic panel
Thanks, Billy - that was my guess and I see the 55 has that wide acrylic instrument pod. I should think you'll do fine with the oscillating blade.
Good luck with it.
Hope you didn't get too much
Thanks, Billy - that was my guess and I see the 55 has that wide acrylic instrument pod. I should think you'll do fine with the oscillating blade.
Good luck with it.
Hope you didn't get too much
|
By
Craig Briggs
·
#53105
·
|