|
Re: Cook top dimensions
Hello Elja,
I did not convert my gas oven to electric because I am happy with my gas oven.
But its not a big deal to convert it. It will probably cost about 200 euros max.
You only need a heating
Hello Elja,
I did not convert my gas oven to electric because I am happy with my gas oven.
But its not a big deal to convert it. It will probably cost about 200 euros max.
You only need a heating
|
By
Oliver Henrichsen, SV Vela Nautica
·
#53672
·
|
|
Re: A54 top loading fridge /freezer strut
Soraya,
I got one from a UK supplier – see attached. I have not been back to the boat to fit it yet.
Cheers,
Paul
S/Y Ya Fohi - Amel 54 #98 - Grenada
Soraya,
I got one from a UK supplier – see attached. I have not been back to the boat to fit it yet.
Cheers,
Paul
S/Y Ya Fohi - Amel 54 #98 - Grenada
|
By
Paul Dowd and Sharon Brown
·
#53671
·
|
|
Re: Run 2500w inverter always even on shore power?
Hi,
You are faced with the difference in 50 and 60 Cycles from the mains power. Most appliances with a pump run bad or not at all when you are running at a different cycle-count as where they were
Hi,
You are faced with the difference in 50 and 60 Cycles from the mains power. Most appliances with a pump run bad or not at all when you are running at a different cycle-count as where they were
|
By
Arno Luijten
·
#53670
·
|
|
Re: Onan Generator exhaust temperature switch - great price.
Hi Jim,
I am still compiling a list of people who want the switch.
I believe you have a mdkav generator . This is the switch for thet generator.
Fair Winds
Eric
Amel Super Maramu #376
Hi Jim,
I am still compiling a list of people who want the switch.
I believe you have a mdkav generator . This is the switch for thet generator.
Fair Winds
Eric
Amel Super Maramu #376
|
By
eric freedman
·
#53669
·
|
|
Re: A54 top loading fridge /freezer strut
You can try https://www.ressorts-sodemann.fr/ They even speak your native tongue!
You will need to measure the old one and determine the end-pieces required. The opening force appears to be 300N
You can try https://www.ressorts-sodemann.fr/ They even speak your native tongue!
You will need to measure the old one and determine the end-pieces required. The opening force appears to be 300N
|
By
Arno Luijten
·
#53668
·
|
|
Re: A54 top loading fridge /freezer strut
Hello,
Amel are currently unable to provide the strut from their usual supplier.
I managed to get the following reference after removing the strut. 14320310-300N. Unfortunately no brand referenced.
Hello,
Amel are currently unable to provide the strut from their usual supplier.
I managed to get the following reference after removing the strut. 14320310-300N. Unfortunately no brand referenced.
|
By
Sv Garulfo
·
#53667
·
|
|
Re: Cook top dimensions
Responding to Gerhard, yours seems a brilliant solution but from the photo I cannot understand if the system is gimballing or you are using it only in the fixed position
Paolo Cuneo
SM454 Whisper
Responding to Gerhard, yours seems a brilliant solution but from the photo I cannot understand if the system is gimballing or you are using it only in the fixed position
Paolo Cuneo
SM454 Whisper
|
By
PAOLO CUNEO
·
#53666
·
|
|
Run 2500w inverter always even on shore power?
Hi,
I'm on shore power mostly now, a US to Euro pigtail given the boat 240v at 50hz. The Chilla AC works, dishwasher too but the washing machine (LG Direct 7) is giving problems. It starts up and
Hi,
I'm on shore power mostly now, a US to Euro pigtail given the boat 240v at 50hz. The Chilla AC works, dishwasher too but the washing machine (LG Direct 7) is giving problems. It starts up and
|
By
Billy Newport
·
#53665
·
Edited
|
|
Re: tb/AMEL owner or AMEL familiar professional near COOMERA QLND AUSTRALIA/AYOG
Hi Teun
Let's see if you find anyone closer first, but if not then I could potentially help. The only issue with me is that I am around 100km away, up in Scarborough, and I don't really have any other
Hi Teun
Let's see if you find anyone closer first, but if not then I could potentially help. The only issue with me is that I am around 100km away, up in Scarborough, and I don't really have any other
|
By
Colin - ex SV Island Pearl
·
#53664
·
|
|
tb/AMEL owner or AMEL familiar professional near COOMERA QLND AUSTRALIA/AYOG
I am looking for an AMEL (54??) owner or a person familiar with AMEL (54) in the COOMERA QUEENSLAND AUSTRALIA area.
Reading that QANTAS will not take any international reservations prior to March
I am looking for an AMEL (54??) owner or a person familiar with AMEL (54) in the COOMERA QUEENSLAND AUSTRALIA area.
Reading that QANTAS will not take any international reservations prior to March
|
By
Teun BAAS
·
#53663
·
|
|
Re: Onan Generator exhaust temperature switch - great price.
Hi Eric,
I want to buy one. Please provide instructors for payment.
Vladimir
202 258 1916
sonsev52@...
SM 345 " LIFE IS GOOD"
Hi Eric,
I want to buy one. Please provide instructors for payment.
Vladimir
202 258 1916
sonsev52@...
SM 345 " LIFE IS GOOD"
|
By
VLADIMIR SONSEV
·
#53662
·
|
|
Re: Onan Generator exhaust temperature switch - great price.
Eric, Just following up to see if you need $. I've been tied up for awhile & hope I didn't miss the boat.. Jim SM384 Sirena Azul
Eric, Just following up to see if you need $. I've been tied up for awhile & hope I didn't miss the boat.. Jim SM384 Sirena Azul
|
By
Jim Anderson
·
#53661
·
|
|
Re: SM galley Faucet very hot.
Hola Jose,
You could try on the hydrophore to reduce the pressure, which I believe is normal around 2.3bar, to 2.1 or 2
Un saludo,
Steven SM 475
Verstuurd vanaf mijn iPhone
Hola Jose,
You could try on the hydrophore to reduce the pressure, which I believe is normal around 2.3bar, to 2.1 or 2
Un saludo,
Steven SM 475
Verstuurd vanaf mijn iPhone
|
By
Steven Nieman
·
#53660
·
|
|
Re: SM galley Faucet very hot.
Returning to the soap opera of excessively hot water in the system (I discovered that it is not only on the kitchen tap, but on all taps on the boat).
I checked the entire system.
The problem is not
Returning to the soap opera of excessively hot water in the system (I discovered that it is not only on the kitchen tap, but on all taps on the boat).
I checked the entire system.
The problem is not
|
By
JOSE PRIETO
·
#53659
·
|
|
Re: Cook top dimensions
Hey, Paolo.
please what are the mass of the microwave compartment , there are microwaves with seperate home-air levels then you would have a hot air / microwaves/ grill
downstairs the induction
Hey, Paolo.
please what are the mass of the microwave compartment , there are microwaves with seperate home-air levels then you would have a hot air / microwaves/ grill
downstairs the induction
|
By
Elja Röllinghoff Balu SM 222
·
#53658
·
|
|
Re: Cook top dimensions
Hi Paolo,
Point taken. Yes depth appears it would be a problem. Thanks for the tip.
I will follow up with Bills suggestion re the option from the UK.
Cheers
Bryce
SM 2000 #467
Get Outlook for Android
Hi Paolo,
Point taken. Yes depth appears it would be a problem. Thanks for the tip.
I will follow up with Bills suggestion re the option from the UK.
Cheers
Bryce
SM 2000 #467
Get Outlook for Android
|
By
Bryce Procter
·
#53657
·
|
|
Re: Cook top dimensions
Paolo,
as you can see from my photo above the 2 flame Silvercrest inductive cooker from Lidl fits perfect.
The space is 590 and the device is 580 mm. So no problem at all.
--
Gerhard Mueller
Amel
Paolo,
as you can see from my photo above the 2 flame Silvercrest inductive cooker from Lidl fits perfect.
The space is 590 and the device is 580 mm. So no problem at all.
--
Gerhard Mueller
Amel
|
By
Gerhard Mueller
·
#53656
·
|
|
Re: Cook top dimensions
Hi all,
I suggest to make double sure about the measurement we are referring to. On my SM, 590 mm is the space available for fitting the entire oven set. The gimballing steel frame outer width is 570
Hi all,
I suggest to make double sure about the measurement we are referring to. On my SM, 590 mm is the space available for fitting the entire oven set. The gimballing steel frame outer width is 570
|
By
PAOLO CUNEO
·
#53655
·
|
|
Re: Cook top dimensions
He Oliver
I dont now that is possible do you have any advice ?
Thanks Elja
SM Balu 222
Von meinem iPhone gesendet
He Oliver
I dont now that is possible do you have any advice ?
Thanks Elja
SM Balu 222
Von meinem iPhone gesendet
|
By
Elja Röllinghoff Balu SM 222
·
#53654
·
|
|
Re: Useful addition to Volvo D3-110 engine's sea water circuit
I was looking a bit more in detail at this strange difference in having a filter or not and later it became clear to me that Volvo Penta only issues this filter to engines connected to AquaDrives, a
I was looking a bit more in detail at this strange difference in having a filter or not and later it became clear to me that Volvo Penta only issues this filter to engines connected to AquaDrives, a
|
By
Arno Luijten
·
#53653
·
|