Hi experts, we are having a problem with the B&G windspeed: Last summer it stopped worrking suddenly and I checked the cables and contacts in the junction box on the board above the front cabin

Hi Rick, the mizzen sheet's translation in french is "ecoute d'artimon". Ecoute in french means also listen (as when you listen to music). So, obviously a bad translation from French to

I'mreviewing the list of running rigging published on the Amel Forum("Measures of Super Maramu") and mostly have it figured out. But there is reference after the Mizzenhalyard to a "Listen mizzen"

Sorry for the late reply Eamonn, finally getting to read all the Forum email since I arrived in TCI. I have 2 “Swiss Bike” (X-70 and Paratrooper), they have full size wheel (26”) and fold, they

Thank you guys for the great information,,, Much appreciated!!

I have used a grease like substance that hardens with age called Duralac. It is available on ebay. It is amazing stuff. I have been using it on boats since 1995. Fair Winds Eric Kimberlite Amel

I had my aquasignal tricolor and strobe rebuilt by a fellow in Florida with LED’S. Fair Winds Eric Kimberlite Amel Super Maramu #376

Yes I v heard about it and will try, will also try to put a ground wire to the bolt Paul SY KERPA SM 259

Good morning Mark, Sorry been late reading the post. I end up purchasing a different Aqua Signal light than yours. I have one with traditional light, which I will replace with LED. But thanks for the

Sorry have been busy, running behind reading and replying Amel message. Thanks Kent for replying. Sincerely, Alexandre SM2K #289 NIKIMAT Blue Haven Marina, Turks &

Hi All! Charlton Knowles, the operator if Running Mon Marina, and my husband were just talking. Charlton told my husband he just hauled a 53 or 54 Amel. So, if there is an Amel owner on island, we

And so is the AMEL 55... Merry Christmas All of you. Olivier.

With respect to hauling someone up the mast. I never put the line in the jaws of the electric winch. If it runs away I have control, and my fingers. As I mentioned I use the new vectran ballooner

I like parts of almost everyone's response, but Joel's is the most complete response. Comments: I always use an ascender on an external halyard that is also a safety/reserve line. I have a 16mm piece

Joel, in that case please order one for me. Happy Holidays Eric

Kent thanks Eric

Thanks to everyone for all of the great advice, help & explanations. I plan on taking it slow & cautious. I do have an Ascender and will definitely use it as well as a safety. Trevor, I think you're

Joe, The bulb is 25 Watt bayonet fitting, you need a fine Phillips screwdriver for the cover. The most likely reason it has gone out is a halyard slapping close to the fitting. If you are worried

Hi Eric, the AMEL 64 has a hydraulic jack for the same purpose despite conventional rigging. Just FYI All the Best, Joel Joel F. Potter/Cruising Yacht Specialist LLC THE EXPERIENCED AMEL GUY 954

Hi Joe and congratulations on your first foreign landfall. Hope it’s the first of many. I have put Paul Anstey up the mast of well over 150 Super Maramu’s during surveys over the years. Have yet