Hi Eric, Please put me down for one. Thanks, Jim SM384 Sirena Azul Seattle

Online here for $48. or use their $13.20 one with spade connectors rather than screw. http://senasys.com/fan-limit-temperature-switch-generators -- SN68 Sangaris, Tropic Isle Harbor, FL

Sharing some info' for the benefit of those folks who are wanting to fix the back lights that illuminate the breaker panel labels. Almost none of the LED’s back lighting the breaker panel labels

Hi Soraya, I operate them every moth or so. Not much more you can do other then spraying them with Corrosion-X. But the reality is they do get bad as these are pretty standard chromed brass seacocks.

Hi Eric, I'll take 2. Regards Alan Grayson SM 406 Ora Pai Lancaster Virginia

Hi Alan, For the one I have off the springs are good and I can rotate the pin by hand. The plastic rails are a bit sloppy compared to new ones but otherwise good order. I'll have the other one off

Eric, I will order one. I have never had an issue with mine but you never know. Thanks for doing this. Best, Mark Sabbatical III, Sm#419, Rhode Island, USA

I have always used self amalgamating tape round the joint to keep moisture out. It does seem to keep the threads from slipping. Ian Ocean Hobo SN96 (currently in Wales)

When you say grip do you mean just get hard to turn? On my 54 I was about to remove and replace my handle. It was hard to turn and the tank would not empty, I thought it was the handle, it was sticky

Hi Alan, I could be interested. Are the springs that hold the blocks up all working i.e. not broken? Have you ever taken the long pin out ? What's the condition of the plastic slides that bear on the

Mohamed, Are you in the USA? If you are I will order them for you. We will figure out payment when they are in my hands.. Fair Winds, Eric

Mike, These are simple thermal switches. They are normally closed. If the circuit opens up the genset stops. My problem is sometimes they burn out and other times I hit the switch and it

Kent , will do. Fair Winds, Eric

Hello Our SSB Antenna comes in 2 parts. The threading that connects them has gotten loose and we would like to find away to secure them that doesn’t impact the transmission. Has anyone had this

Hello, Any routine maintenance tips for the holding tanks drain seacocks? Ours are starting to grip. Thanks Soraya Garulfo A54-122 Tahiti

Hi Eric; Thanks for sharing the information and your offer to accommodate the group purchase. I’d like 3 of them, if possible. Please let me know how to pay. Happy Sailing;

Thanks Eric. Sent you a message with order details. When these fail, go bad, or break, how do you know? Does it prevent the genset from starting/running? Or does it allow the genset to overheat if

Thanks Eric, Ive had two go bad in the last year. Please order three for me. We'll be coming down from Maine in late Sept. Will you be home then? Thanks. Kent & Iris Kristy SM 243

I have broken a few of these switches over the years. I have done this by reaching over the generator to retrieve something stored behind the genset. I received a quote from my Onan dealer and on

I took the stop off at the forward end of the track and undid the stanchion screws, then bent the stanchion out of the way and they just slid right off. Alan Grayson Sm 406 Ora Pai Sent from