The second set of blades fit into the groove forward of the blades shown. There is also a set of plastic bearings that fit in that groove. Fair Winds Eric Amel Super Maramu #376

There is supposed to be 2 sets of blades. In your photo I only see one. Could you send more photos? Fair Winds Eric Amel Super Maramu #376

Hi Eric, Hi all, you are very right, I just find a picture from last year on the hard. This may be the original Amel setup from 2008. SPURS type B(ravo). But the 2. blade mounting and zinc missing.

Dear Ameliens, I got a new front furler and have to hoist the genoa again. When I prepaired the genoa loops I got the feeling that the Swivel respectively the lower part is in the wrong position. At

Bill & Karen, thanks for doing this. CW Bill Rouse

Hi Armo, I fly into St Thomas June 1. I do not know what tickets mt crew has purchased so I might have to wait a few days in St Thomas for them. We will then fly via private charter to SXM. I am

Hi Please send me photos also to me. kimberlite@... Fair Winds Eric Amel Super Maramu #376

Hello Kent & Iris, We have photos of our set up for pumping the bilges. We did not compromise any of our watertight bulkheads. It’s a bit hard to describe in words, so photos work much better.

With at least some businesses coming back on line in some areas, we are going to try again to put together a group of Amel owners who are looking to improve the appearance of their boats. The

For what is it worth, here is what I do about the fresh water overflow problem; I have a whole house filter that attaches to the hose to the water source. A short hose goes from the filter to the

I think this one on insurance is going to be good. We plan to live stream on zoom and youtube and have a copy available on youtube for future reference.

I have been slugging it out with the authorities in St Maarten since March 24. I believe they will allow me to charter a small plane to get to the island. The prime minister has signed the document

Hi Eric. Lucky you. Danny

Hi, Could you please upload it to YouTube? I will be at sea, Hopefully”.

If I am not mistaken the Model of the cutter is “B” Fair Winds Eric Amel Super Maramu #376

Bernd Our Santorin already had a Bimini added. The centre strut of the frame is bolted forward of the Genoa sheet winches. You can only do this on the Santorin because the SM has two winches there.

ZOOM Meeting Marine Insurance presentation Questions & Answers When: Saturday, 6 June 2020 20:00 to 21:00 (UTC+00:00) UTC An RSVP is requested. Click here to RSVP Description: I asked Gary Golden,

Hi Bernd, I clamped the tube to the mizzen side stay as in Bill Rouses photo but I ran it over the boom rather than under. This has the advantage of much better head room. Regards Danny SM 299

There are several ways. The examples below are for a SM. I believe that they will work for a SN Ketch, but not a Sloop. Look for the eye bolt under where the mizzen boom connects to the mast. Use a

Hi, can anyone please give advise and provide pics how you did fix the aft cockpit enclosure on a SN or SM? especially how and where did you attach the support arch in the aft. -- Bernd SN 119 /