|
Re: [Amel Yacht Owners] Amel Transmission & Maintenance in Ft Lauderdale?
Good afternoon, I do have same request but further EST, I'm based near La Spezia Italy, I did already bow thruster and engine (oil and fuel filter). It's time for the transmission but I'm not ready to
Good afternoon, I do have same request but further EST, I'm based near La Spezia Italy, I did already bow thruster and engine (oil and fuel filter). It's time for the transmission but I'm not ready to
|
By
Stefano Biffi
·
#18469
·
|
|
Re: [Amel Yacht Owners] Amel Transmission & Maintenance in Ft Lauderdale?
Hi Alexandre and the most knowledgeable guy in Florida is Steve Leeds of
Circumnavigators Yacht Services. Steve owns an Amel, has sailed around the
world in it with his wife and son, and worked for
Hi Alexandre and the most knowledgeable guy in Florida is Steve Leeds of
Circumnavigators Yacht Services. Steve owns an Amel, has sailed around the
world in it with his wife and son, and worked for
|
By
amelforme
·
#18468
·
|
|
Amel Transmission & Maintenance in Ft Lauderdale?
Good morning,
Does any one has recommendation for very experienced person or shipyard with the Amel Transmission on the SM2K in Fort Lauderdale?
I just need it to be serviced (changing the bague
Good morning,
Does any one has recommendation for very experienced person or shipyard with the Amel Transmission on the SM2K in Fort Lauderdale?
I just need it to be serviced (changing the bague
|
By
Alexandre Uster von Baar
·
#18467
·
|
|
Re: [Amel Yacht Owners] Re: Santorin ground strap
Goog day to all . It seems to me that the bonding is s very important thing for the survival of our boats. How could you to do to get an official response of the yard AMEL on this? There is an
Goog day to all . It seems to me that the bonding is s very important thing for the survival of our boats. How could you to do to get an official response of the yard AMEL on this? There is an
|
By
enio rossi
·
#18466
·
|
|
Re: [Amel Yacht Owners] Re: Santorin ground strap
I have only seen a grounding copper in the stern lazarette on my 1990 Santorin SN24 and that is primarily for the SSB.
Ric
Bali Hai
Stuck in Annapolis
I have only seen a grounding copper in the stern lazarette on my 1990 Santorin SN24 and that is primarily for the SSB.
Ric
Bali Hai
Stuck in Annapolis
|
By
Ric Gottschalk <ric@...>
·
#18465
·
|
|
Re: [Amel Yacht Owners] Re: Santorin ground strap
Currently I am at work and have no photo with me. But i can say that the rust was in the front of the keel and in the back where you have highlighted. In the front there where more signs of galvanic
Currently I am at work and have no photo with me. But i can say that the rust was in the front of the keel and in the back where you have highlighted. In the front there where more signs of galvanic
|
By
enio rossi
·
#18464
·
|
|
Re: Santorin ground strap
Herbert
I am back on the boat tomorrow in Tenerife. I will check my bilge again. I can't recall seeing an earth attachment point anywhere near the bilge as there is in the lazarette. I would expect to
Herbert
I am back on the boat tomorrow in Tenerife. I will check my bilge again. I can't recall seeing an earth attachment point anywhere near the bilge as there is in the lazarette. I would expect to
|
By
Ian Park
·
#18463
·
|
|
Re: Rust on keel
Hi, I just did in June. Must sandblast whole the keel because otherwise remains rust under the resin and continues to advance. Then, after blasting , would be good to wash it with phosphoric acid
Hi, I just did in June. Must sandblast whole the keel because otherwise remains rust under the resin and continues to advance. Then, after blasting , would be good to wash it with phosphoric acid
|
By
enio rossi
·
#18462
·
|
|
Re: [Amel Yacht Owners] Re: Santorin ground strap
Enio
Do you have fotos of your keel damage? How does the corrosion on the keel look like?
Herbert
KALI MERA
SN120
Von Samsung Mobile gesendet
-------- Ursprüngliche Nachricht --------
Von:
Enio
Do you have fotos of your keel damage? How does the corrosion on the keel look like?
Herbert
KALI MERA
SN120
Von Samsung Mobile gesendet
-------- Ursprüngliche Nachricht --------
Von:
|
By
Herbert Lackner
·
#18461
·
|
|
Re: Santorin ground strap
Hi Herbert, i cannot see the ground strap in the the bilge. I do not see any connection of ground wires in the top of the bilge, so i can not put pictures. If anyone has seen it please put him photos.
Hi Herbert, i cannot see the ground strap in the the bilge. I do not see any connection of ground wires in the top of the bilge, so i can not put pictures. If anyone has seen it please put him photos.
|
By
enio rossi
·
#18460
·
|
|
Re: Santorin ground strap
Ian,
our Santorin (120) has a copper strap that runs down the bilge, it has a width of app 3cm and is quite thin. It is in an deplorable condition so I want to change it during winter with a more
Ian,
our Santorin (120) has a copper strap that runs down the bilge, it has a width of app 3cm and is quite thin. It is in an deplorable condition so I want to change it during winter with a more
|
By
Herbert Lackner
·
#18459
·
|
|
Re: Santorin ground strap
Herbert
I didn't think the Santorin had a ground strap in the bilge. There was some indication of this in earlier posts. I cannot locate one in mine, but we are a little older at hull no
Herbert
I didn't think the Santorin had a ground strap in the bilge. There was some indication of this in earlier posts. I cannot locate one in mine, but we are a little older at hull no
|
By
Ian Park
·
#18458
·
|
|
Re: Santorin ground strap
Hi Enio,
the ground strap is a piece of copper that goes down the bilge, I think it is the same position on the Santorin as on the SM. It is quite thin copper strip, we will exchange it to a bigger
Hi Enio,
the ground strap is a piece of copper that goes down the bilge, I think it is the same position on the Santorin as on the SM. It is quite thin copper strip, we will exchange it to a bigger
|
By
Herbert Lackner
·
#18457
·
|
|
Santorin ground strap
good day to you all. The keel of my Santorin (122) shows cospiquous taces of galvanic corrosion. I think the problem might be due to the damage or breaking of the ground strap. But I can not find the
good day to you all. The keel of my Santorin (122) shows cospiquous taces of galvanic corrosion. I think the problem might be due to the damage or breaking of the ground strap. But I can not find the
|
By
enio rossi
·
#18456
·
|
|
Re: [Amel Yacht Owners] main outhaul
Steve, Thanks for the link , I will order it today. Thanks Again, Pat
Steve, Thanks for the link , I will order it today. Thanks Again, Pat
|
By
Patrick McAneny
·
#18455
·
|
|
Re: Propshaft wearing ring
Bob,
Forgot to ask how much Amel charged, if you don't mind.
Craig
SN#68 Sangaris
---In amelyachtowners@..., <rossidesigngroup@...> wrote :
In March, 2014 I ordered and received FROM AMEL a bronze
Bob,
Forgot to ask how much Amel charged, if you don't mind.
Craig
SN#68 Sangaris
---In amelyachtowners@..., <rossidesigngroup@...> wrote :
In March, 2014 I ordered and received FROM AMEL a bronze
|
By
Craig Briggs
·
#18454
·
|
|
Re: [Amel Yacht Owners] Re: Propshaft wearing ring
Bob,
Thanks for the update - seems Amel may be quietly listening and finally fixed this annoying design flaw.
Craig
SN#68 Sangaris
---In amelyachtowners@..., <yahoogroups@...> wrote :
Bob,
This is
Bob,
Thanks for the update - seems Amel may be quietly listening and finally fixed this annoying design flaw.
Craig
SN#68 Sangaris
---In amelyachtowners@..., <yahoogroups@...> wrote :
Bob,
This is
|
By
Craig Briggs
·
#18453
·
|
|
Re: [Amel Yacht Owners] Anchor and chain
Andrew,
I do not think so, but if you find a solution, let me know.
Bill
Andrew,
I do not think so, but if you find a solution, let me know.
Bill
|
By
Bill & Judy Rouse <yahoogroups@...>
·
#18452
·
|
|
Re: [Amel Yacht Owners] Anchor and chain
Others have put zincs on the first link or two. I have galvanized chain and anchor, so haven't looked into exactly what kind of zinc is used.
Kent
SM243
Kristy
Others have put zincs on the first link or two. I have galvanized chain and anchor, so haven't looked into exactly what kind of zinc is used.
Kent
SM243
Kristy
|
By
karkauai
·
#18451
·
|
|
Re: [Amel Yacht Owners] Anchor and chain
Hi Bill
Yes on the last haul out I did exactly that but with an angle grinder on the hard – it just seemed a bit of a crude solution – and within a few weeks the surface rust was back. I
Hi Bill
Yes on the last haul out I did exactly that but with an angle grinder on the hard – it just seemed a bit of a crude solution – and within a few weeks the surface rust was back. I
|
By
Andrew & Kate Lamb
·
#18450
·
|