Hi Anne and John, Those were my posts on using ACMO (not ARCO) - stands for ACcastillage MOderne and they are the rigging supplier for Amel. Their web site is acmo dot fr and the contact info is

I'm not entirely sure 14 years of age automatically dictates rigging replacement. Where she's been and what she's been through would be major considerations when inspecting the rig. Buyer should

Hello Kent, This is what I thought about the galvanic isolator only prevents from the "other" boats. Interesting you mentioned the battery charger, as I just replaced my Dolphin 50 AMP that died

My understanding is that galvanic isolator a protect you from stray currents at the dock or from other boats, but not from stray currents generated on your boat. They work because the shore power

A potential buyer of Bali Hai is wanting to have the rigging checked. I would suggest that a better course of action would be to assume that as the rigging is fourteen years old that prudent buyer

Thank you John, that is good to know about the competent electrician. Little by little I will try to think how to trace, etc. Thanks again, sincerely,

Hello Alexandre, I would not know for certain but I think not as it neutralisesstray currents and these could come from a miriad of places on a boat like ourswith so many complex electronic bits of

Good morning Mike Thank you for the info, I know I have a short, but I don't know where... How to track and resolve it is the true question... Sincerely,

Good morning John Is a galvanic isolator only to prevent electrolysis from "other boats" only? I am now in Nassau for 1 more month. There is unfortunately absolutely no one competent in Nassau. As I

Good morning eric, Ok I know exactly what you want now. It will be Wednesday before I will have time to empty the locker and make the measurements, I will also take more pictures and make a drawing

Hi admin Is it possible for you to devide the thread "Windows...." Into two parts and rename the second part to "Jordan drough" (check spelling) Thanks Ann-Sofie Svanberg SY Lady Annila, SM

Hello Eric, In case it helps, on my previous boat, an Oyster 435 I had aninner forestay fitted but it was fixed less than three feet from the top of themast to avoid the need for running backstays.

Hi Alex / John & Anne, Following the problems experienced by Kent we took the precaution of fitting a galvanic isolator connected to the shore power input prior to the shore/generator power changeover

Hello Alex, I suggest that you look it up on Google and then employ amarine electrician to fit one.You are running the risk of strayelectricity causing severe damage through galvanic corrosion

Hello Eric, I am finishing to get ready to leave for Atlantis Marina tomorrow morning, but will be back Tuesday and will have more time (Tuesday or Wednesday) to measure exactly where the exhaust