|
Sail Plan - Super Maramu
I have been asked by a rigger Colin Quin, for a Sail Plan and a rigging sequence. Can anyone assist please? Thank you.
Barry & Robyn
Tradewinds III SM# 171
I have been asked by a rigger Colin Quin, for a Sail Plan and a rigging sequence. Can anyone assist please? Thank you.
Barry & Robyn
Tradewinds III SM# 171
|
By
seagasm <seagasm@...>
·
#51724
·
|
|
Re: Best location for solar panels
Thank you all for your help, ideas, videos and valuable advice. It is great to have the luxury to learn from others without doing mistakes and waste money. Thank you! I am in between rail mounting and
Thank you all for your help, ideas, videos and valuable advice. It is great to have the luxury to learn from others without doing mistakes and waste money. Thank you! I am in between rail mounting and
|
By
Alin SM 283
·
#51723
·
|
|
Re: Leece -Neville Alternator external regulator install
Dan - Thanks very much for your detailed response and photo. I appreciate your help. I hadn't considered the Sterling alternator protector as we don't (yet) have LiFePO4 batteries, but installing
Dan - Thanks very much for your detailed response and photo. I appreciate your help. I hadn't considered the Sterling alternator protector as we don't (yet) have LiFePO4 batteries, but installing
|
By
Kevin Fox
·
#51722
·
|
|
Re: Best location for solar panels
Thank you. Where on the deck area do they think to mount them?
Thank you. Where on the deck area do they think to mount them?
|
By
Alin SM 283
·
#51721
·
|
|
𝗡𝗲𝘄 𝗜𝗻𝗳𝗼𝗿𝗺𝗮𝘁𝗶𝗼𝗻 𝘄𝗵𝗶𝗰𝗵 𝘄𝗶𝗹𝗹 𝗮𝗹𝗹𝗼𝘄 𝗮𝗻𝘆𝗼𝗻𝗲 𝘄𝗶𝘁𝗵 𝗶𝗻𝘁𝗲𝗿𝗻𝗲𝘁 𝗮𝘀𝘀𝗲𝘀𝘀 𝘁𝗼 𝗼𝗯𝘀𝗲𝗿𝘃𝗲 𝘁𝗵𝗲 𝗭𝗢𝗢𝗠 𝗠𝗲𝗲𝘁𝗶𝗻𝗴
#ZOOM
#YouTube_Live_Stream
NEW: We plan a YouTube Live Stream of our ZOOM meeting (schedule below).
Tilo Peters, a member from Switzerland and our ZOOM administrator for this session, set up a YouTube Live Stream for our
NEW: We plan a YouTube Live Stream of our ZOOM meeting (schedule below).
Tilo Peters, a member from Switzerland and our ZOOM administrator for this session, set up a YouTube Live Stream for our
|
By
CW Bill Rouse
·
#51720
·
|
|
Re: Membrane Tube end caps
Hi Bill,
Guy has sold the business to Florian Saltel (a former employee). Guy moved to Canada last year. Their connection to Budget is informal now and the name is no longer carried in the store.
Hi Bill,
Guy has sold the business to Florian Saltel (a former employee). Guy moved to Canada last year. Their connection to Budget is informal now and the name is no longer carried in the store.
|
By
Arno Luijten
·
#51719
·
|
|
Re: Engine room hatch repair
Il 23/04/2020 14:31, Alan Grayson ha scritto:
Il 23/04/2020 14:31, Alan Grayson ha scritto:
|
By
Giovanni TESTA
·
#51718
·
|
|
Re: 𝗭𝗢𝗢𝗠 𝗴𝗲𝘁 𝘁𝗼𝗴𝗲𝘁𝗵𝗲𝗿
Kelly,
We are not going to change anything at this late stage, but thanks for the offer.
Bill
Kelly,
We are not going to change anything at this late stage, but thanks for the offer.
Bill
|
By
CW Bill Rouse
·
#51717
·
|
|
Re: Engine room hatch repair
Hi Steve,
Would you please send me a set of your project photos too.
Thank you.
Paul on Aramis, SM 444, in San Francisco Bay, California
paulguenette@...
Hi Steve,
Would you please send me a set of your project photos too.
Thank you.
Paul on Aramis, SM 444, in San Francisco Bay, California
paulguenette@...
|
By
Paul Guenette
·
#51716
·
|
|
Re: Engine room hatch repair
That would be great thanks Steve.
bazgrayson@...
That would be great thanks Steve.
bazgrayson@...
|
By
Alan Grayson
·
#51715
·
|
|
Re: 𝗭𝗢𝗢𝗠 𝗴𝗲𝘁 𝘁𝗼𝗴𝗲𝘁𝗵𝗲𝗿
Hi Bill, great idea.
We are interested, especially in the standing rigging topic. (I'll vote in your poll shortly.)
I agree with the person who suggested using Jitsi. Its quite easy to use. Ryan and
Hi Bill, great idea.
We are interested, especially in the standing rigging topic. (I'll vote in your poll shortly.)
I agree with the person who suggested using Jitsi. Its quite easy to use. Ryan and
|
By
Kelly Ran
·
#51714
·
|
|
Re: Engine room hatch repair
Hi Alan.
We have just finished having this same problem repaired .
we cut out the rotten portion and fitted G10 plates after re fibreglassing and strenghtening the rotten portion send me
Hi Alan.
We have just finished having this same problem repaired .
we cut out the rotten portion and fitted G10 plates after re fibreglassing and strenghtening the rotten portion send me
|
By
Steve Bell s/y Dusk SM378
·
#51713
·
|
|
Re: Best location for solar panels
Hello,
Can't claim that it's the best, but this setup works very well for us. See attached.
Stay safe!
Kelly + Ryan
SM233 Iteration
Boston
SAIL0120_BW_Flexisolar.pdf
Hello,
Can't claim that it's the best, but this setup works very well for us. See attached.
Stay safe!
Kelly + Ryan
SM233 Iteration
Boston
SAIL0120_BW_Flexisolar.pdf
|
By
Kelly Ran
·
#51712
·
|
|
Re: Membrane Tube end caps
I bought Dessalator parts from Ile Marine on the French side. Guy (forget last name) owned it. It was named Ile Budget Marine. He ordered high pressure hose and a PCB controller from Dessalator for
I bought Dessalator parts from Ile Marine on the French side. Guy (forget last name) owned it. It was named Ile Budget Marine. He ordered high pressure hose and a PCB controller from Dessalator for
|
By
CW Bill Rouse
·
#51711
·
|
|
Re: Membrane Tube end caps
Hi Hanspeter,
I'm quite close to you, in the Fort Louis Marina. Be advised you are not allowed to go to the Dutch side. Yesterday they even had an incident with someone trying to cross the border. Not
Hi Hanspeter,
I'm quite close to you, in the Fort Louis Marina. Be advised you are not allowed to go to the Dutch side. Yesterday they even had an incident with someone trying to cross the border. Not
|
By
Arno Luijten
·
#51710
·
|
|
Re: Leece -Neville Alternator external regulator install
Hello,
1. This setUp looks very similar to mine.
I use the VSR alternator regulator from cruisers project.
2. I would suggest to place the old unused regulator back in place. On the pictures all
Hello,
1. This setUp looks very similar to mine.
I use the VSR alternator regulator from cruisers project.
2. I would suggest to place the old unused regulator back in place. On the pictures all
|
By
Oliver Henrichsen, SV Vela Nautica
·
#51709
·
|
|
Re: Membrane Tube end caps
If you're leaking product then it's a low pressure line that is leaking. I would start at the product end of the tubes and it shouldn't be too tough to find the leak. Follow all the lines until they
If you're leaking product then it's a low pressure line that is leaking. I would start at the product end of the tubes and it shouldn't be too tough to find the leak. Follow all the lines until they
|
By
Ken Powers SV Aquarius
·
#51708
·
|
|
Re: Leece -Neville Alternator external regulator install
Hello Kevin, I am very happy with the WakeSpeed 500.
Here is a photo of my install. I attached a plywood mounting board to the aft bulkhead of the engine room, behind the engine/alternator. (With
Hello Kevin, I am very happy with the WakeSpeed 500.
Here is a photo of my install. I attached a plywood mounting board to the aft bulkhead of the engine room, behind the engine/alternator. (With
|
By
Dan Carlson
·
#51707
·
|
|
Re: Membrane Tube end caps
Thanks John
Yes Electec is a good company. I will go tomorrow to speak with them about the end caps from DesalI. I have still 6 end caps, 2 of them with the hp water inlet, from Desal, He sended to me
Thanks John
Yes Electec is a good company. I will go tomorrow to speak with them about the end caps from DesalI. I have still 6 end caps, 2 of them with the hp water inlet, from Desal, He sended to me
|
By
hanspeter baettig
·
#51706
·
|
|
Engine room hatch repair
Hi All, the mild steel that supports the gas struts in my engine room hatch has gotten water into it and is rusting away and expanding causing a bulge in the engine room hatch in 2 spots.
Has anyone
Hi All, the mild steel that supports the gas struts in my engine room hatch has gotten water into it and is rusting away and expanding causing a bulge in the engine room hatch in 2 spots.
Has anyone
|
By
Alan Grayson
·
#51705
·
|