|
Re: Genoa Swivel - position + binding connection to the genoa top loop - Amel 54
Ok, how many slots on your foil? 1, 2, or 3?
Best,
CW Bill Rouse
Amel Owners Yacht School
+1 832-380-4970 | brouse@...
720 Winnie, Galveston Island, Texas 77550
www.AmelOwnersYachtSchool.com
Yacht
Ok, how many slots on your foil? 1, 2, or 3?
Best,
CW Bill Rouse
Amel Owners Yacht School
+1 832-380-4970 | brouse@...
720 Winnie, Galveston Island, Texas 77550
www.AmelOwnersYachtSchool.com
Yacht
|
By
CW Bill Rouse
·
#52441
·
|
|
Re: Genoa Swivel - position + binding connection to the genoa top loop - Amel 54
Hi,
Relax, the furler swivel is just as it should be.
To enlighten you, the swivel is developed to fly two headsails simultaneously. Actually the Genua and the Ballooner (that is wat Amel calls it).
Hi,
Relax, the furler swivel is just as it should be.
To enlighten you, the swivel is developed to fly two headsails simultaneously. Actually the Genua and the Ballooner (that is wat Amel calls it).
|
By
Arno Luijten
·
#52440
·
|
|
Re: Genoa Swivel - position + binding connection to the genoa top loop - Amel 54
Dear Bill,
no, it has 1 pole.
Ballooner/ gennaker is separate furled in front of the genoa.
But I like the possibility to have 2 genoa in the foil (butterfly) - very good experiences on my previous
Dear Bill,
no, it has 1 pole.
Ballooner/ gennaker is separate furled in front of the genoa.
But I like the possibility to have 2 genoa in the foil (butterfly) - very good experiences on my previous
|
By
Stefan Schaufert
·
#52439
·
|
|
Re: Zink Anode for SPURS Line Cutter
Eric, et al,
One of the blades should be held in place by the V shaped oil drain bolt, the other blade spins with the shaft.
Something is very wrong with this installation.
Eric, et al,
One of the blades should be held in place by the V shaped oil drain bolt, the other blade spins with the shaft.
Something is very wrong with this installation.
|
By
CW Bill Rouse
·
#52438
·
|
|
Re: Genoa Swivel - position + binding connection to the genoa top loop - Amel 54
Before I answer, is your 54 rigged for twin headsails with two poles (ballooner)?
Before I answer, is your 54 rigged for twin headsails with two poles (ballooner)?
|
By
CW Bill Rouse
·
#52437
·
|
|
Spurs line cutter on Amel 54
Hi Eric,
THX so much. Another pic, not so good, from aside view.
For more detailed enclosed view, you can it enlarge. Hopfully the space between is just right enough to fit the second fixed blade.
So
Hi Eric,
THX so much. Another pic, not so good, from aside view.
For more detailed enclosed view, you can it enlarge. Hopfully the space between is just right enough to fit the second fixed blade.
So
|
By
Ulrich Michael Dangelmeyer
·
#52436
·
|
|
Re: Zink Anode for SPURS Line Cutter
The second set of blades fit into the groove forward of the blades shown. There is also a set of plastic bearings that fit in that groove.
Fair Winds
Eric
Amel Super Maramu #376
The second set of blades fit into the groove forward of the blades shown. There is also a set of plastic bearings that fit in that groove.
Fair Winds
Eric
Amel Super Maramu #376
|
By
eric freedman
·
#52435
·
|
|
Re: Zink Anode for SPURS Line Cutter
There is supposed to be 2 sets of blades. In your photo I only see one.
Could you send more photos?
Fair Winds
Eric
Amel Super Maramu #376
There is supposed to be 2 sets of blades. In your photo I only see one.
Could you send more photos?
Fair Winds
Eric
Amel Super Maramu #376
|
By
eric freedman
·
#52434
·
|
|
Re: Zink Anode for SPURS Line Cutter
Hi Eric,
Hi all,
you are very right, I just find a picture from last year on the hard. This may be the original Amel setup from 2008.
SPURS type B(ravo).
But the 2. blade mounting and zinc missing.
Hi Eric,
Hi all,
you are very right, I just find a picture from last year on the hard. This may be the original Amel setup from 2008.
SPURS type B(ravo).
But the 2. blade mounting and zinc missing.
|
By
Ulrich Michael Dangelmeyer
·
#52433
·
|
|
Genoa Swivel - position + binding connection to the genoa top loop - Amel 54
Dear Ameliens,
I got a new front furler and have to hoist the genoa again.
When I prepaired the genoa loops I got the feeling that the Swivel respectively the lower part is in the wrong position.
At
Dear Ameliens,
I got a new front furler and have to hoist the genoa again.
When I prepaired the genoa loops I got the feeling that the Swivel respectively the lower part is in the wrong position.
At
|
By
Stefan Schaufert
·
#52432
·
|
|
Re: More Options for Rub Rail Inserts
Bill & Karen, thanks for doing this.
CW Bill Rouse
Bill & Karen, thanks for doing this.
CW Bill Rouse
|
By
CW Bill Rouse
·
#52431
·
|
|
Re: Getting to St Maarten- New York
Hi Armo,
I fly into St Thomas June 1. I do not know what tickets mt crew has purchased so I might have to wait a few days in St Thomas for them.
We will then fly via private charter to SXM.
I am
Hi Armo,
I fly into St Thomas June 1. I do not know what tickets mt crew has purchased so I might have to wait a few days in St Thomas for them.
We will then fly via private charter to SXM.
I am
|
By
eric freedman
·
#52430
·
|
|
Re: no bilgepump in saloon Am54
Hi
Please send me photos also to me.
kimberlite@...
Fair Winds
Eric
Amel Super Maramu #376
Hi
Please send me photos also to me.
kimberlite@...
Fair Winds
Eric
Amel Super Maramu #376
|
By
eric freedman
·
#52429
·
|
|
Re: no bilgepump in saloon Am54
Hello Kent & Iris,
We have photos of our set up for pumping the bilges. We did not compromise any of our watertight bulkheads. It’s a bit hard to describe in words, so photos work much better.
Hello Kent & Iris,
We have photos of our set up for pumping the bilges. We did not compromise any of our watertight bulkheads. It’s a bit hard to describe in words, so photos work much better.
|
By
Brian Mitchell
·
#52428
·
|
|
Re: More Options for Rub Rail Inserts
With at least some businesses coming back on line in some areas, we are going to try again to put together a group of Amel owners who are looking to improve the appearance of their boats.
The
With at least some businesses coming back on line in some areas, we are going to try again to put together a group of Amel owners who are looking to improve the appearance of their boats.
The
|
By
Karen Smith
·
#52427
·
|
|
Re: no bilge pump in saloon Am54
For what is it worth, here is what I do about the fresh water overflow problem;
I have a whole house filter that attaches to the hose to the water source. A short hose goes from the filter to the
For what is it worth, here is what I do about the fresh water overflow problem;
I have a whole house filter that attaches to the hose to the water source. A short hose goes from the filter to the
|
By
Miles
·
#52426
·
|
|
Re: Updated Event: ZOOM Meeting Marine Insurance presentation Questions & Answers - Saturday, 6 June 2020
#cal-invite
I think this one on insurance is going to be good.
We plan to live stream on zoom and youtube and have a copy available on youtube for future reference.
I think this one on insurance is going to be good.
We plan to live stream on zoom and youtube and have a copy available on youtube for future reference.
|
By
CW Bill Rouse
·
#52425
·
|
|
Re: Updated Event: ZOOM Meeting Marine Insurance presentation Questions & Answers - Saturday, 6 June 2020
#cal-invite
I have been slugging it out with the authorities in St Maarten since March 24. I believe they will allow me to charter a small plane to get to the island. The prime minister has signed the document
I have been slugging it out with the authorities in St Maarten since March 24. I believe they will allow me to charter a small plane to get to the island. The prime minister has signed the document
|
By
eric freedman
·
#52424
·
|
|
Re: Updated Event: ZOOM Meeting Marine Insurance presentation Questions & Answers - Saturday, 6 June 2020
#cal-invite
Hi Eric. Lucky you.
Danny
Hi Eric. Lucky you.
Danny
|
By
Danny and Yvonne SIMMS
·
#52423
·
|
|
Re: Updated Event: ZOOM Meeting Marine Insurance presentation Questions & Answers - Saturday, 6 June 2020
#cal-invite
Hi,
Could you please upload it to YouTube?
I will be at sea, Hopefully”.
Hi,
Could you please upload it to YouTube?
I will be at sea, Hopefully”.
|
By
eric freedman
·
#52422
·
|