|
Re: Cable feed into Main and Mizzen masts on a A54
Hello,
You find the mizzen cables behind the master shower lamp.
My Mizzen to Mainmast stay antenna wire (triatic??) ended there too. So I had to route it from there to the navseat. There is a cable
Hello,
You find the mizzen cables behind the master shower lamp.
My Mizzen to Mainmast stay antenna wire (triatic??) ended there too. So I had to route it from there to the navseat. There is a cable
|
By
Oliver Henrichsen, SV Vela Nautica
·
#51860
·
|
|
Cable feed into Main and Mizzen masts on a A54
Dear forum,
Does anyone have drawings, pictures or other information on how the cables are routed into the mizzen and main masts of a A54 and how to access the cables for the mizzen? One of the things
Dear forum,
Does anyone have drawings, pictures or other information on how the cables are routed into the mizzen and main masts of a A54 and how to access the cables for the mizzen? One of the things
|
By
Arno Luijten
·
#51859
·
|
|
Re: A54 lewmar chain counter setup: check yours!
Hi Thomas,
Actually I found out the very same thing when I replaced the chain counter. Mine was getting pretty bad with the the LCD readout. So when I replaced it I found the same issue. One of those
Hi Thomas,
Actually I found out the very same thing when I replaced the chain counter. Mine was getting pretty bad with the the LCD readout. So when I replaced it I found the same issue. One of those
|
By
Arno Luijten
·
#51858
·
|
|
Re: Sail Plan - Super Maramu
Download this file from the FILES section of the group's website:
Standing Rigging Install and Tune SN SM and 54 revised 04-27-2020.pdf
This new revision includes mainmast intermediates which were
Download this file from the FILES section of the group's website:
Standing Rigging Install and Tune SN SM and 54 revised 04-27-2020.pdf
This new revision includes mainmast intermediates which were
|
By
CW Bill Rouse
·
#51857
·
|
|
Re: Sail Plan - Super Maramu
Hi Ken!
Hope you both feeling good looked down there.
Here a link with a better photo and more rigging
Hi Ken!
Hope you both feeling good looked down there.
Here a link with a better photo and more rigging
|
By
Stefan and Anne Deerberg
·
#51856
·
|
|
Re: Sail Plan - Super Maramu
Stefan, Do you have a better photo of the document? It would really be nice to have if I ever have to re-rig!
Thanks,
Ken Powers
Aquarius SM2K262
Stefan, Do you have a better photo of the document? It would really be nice to have if I ever have to re-rig!
Thanks,
Ken Powers
Aquarius SM2K262
|
By
Ken Powers SV Aquarius
·
#51855
·
|
|
Re: Lewmar acrylic lens replacement on Amel 54
Hallo Wolfgang,
Vielen dank fur diese Tip. I habe die Bestellung gemacht.
Gruss,
Arno
Hallo Wolfgang,
Vielen dank fur diese Tip. I habe die Bestellung gemacht.
Gruss,
Arno
|
By
Arno Luijten
·
#51854
·
|
|
A54 lewmar chain counter setup: check yours!
Hi all,
I got a bit red faced the other day when I realised the lewmar chain counter was still using factory default parameters, including a 300mm chain per revolution. I measured the reality: ~450mm
Hi all,
I got a bit red faced the other day when I realised the lewmar chain counter was still using factory default parameters, including a 300mm chain per revolution. I measured the reality: ~450mm
|
By
Sv Garulfo
·
#51853
·
|
|
Re: Lewmar acrylic lens replacement on Amel 54
Hi Arno,
It was www.foliencenter24.com
Wolfgang Weber SY Elise Amel 54#162
Hi Arno,
It was www.foliencenter24.com
Wolfgang Weber SY Elise Amel 54#162
|
By
Wolfgang Weber
·
#51852
·
|
|
Re: Lewmar acrylic lens replacement on Amel 54
Hi Wolfgang,
Thanks for the information. Do you remember where you bought that stuff? I have trouble finding an online store that sells this stuff in boat-size quantities instead of sky-scraper
Hi Wolfgang,
Thanks for the information. Do you remember where you bought that stuff? I have trouble finding an online store that sells this stuff in boat-size quantities instead of sky-scraper
|
By
Arno Luijten
·
#51851
·
|
|
Re: New file uploaded to main@AmelYachtOwners.groups.io
Kent,
I talked to Steve about it. There were some errors in the file that were made by Steve's contractor. That file was removed from the files section.
This file may help you. It is everything that
Kent,
I talked to Steve about it. There were some errors in the file that were made by Steve's contractor. That file was removed from the files section.
This file may help you. It is everything that
|
By
CW Bill Rouse
·
#51850
·
|
|
Re: New file uploaded to main@AmelYachtOwners.groups.io
Bill
I can't find the file uploaded by Steve Bell for engine room hatch repair. I clicked on the link in the notification email which took me to Files, but I can't find it.
Help!
Kent
SM 243
Kristy
Bill
I can't find the file uploaded by Steve Bell for engine room hatch repair. I clicked on the link in the notification email which took me to Files, but I can't find it.
Help!
Kent
SM 243
Kristy
|
By
karkauai
·
#51849
·
|
|
Re: Top loading galley fridge/freezer used as a fridge: No?
Scott, congratulations on your crossing to Hawaii. Sorry you had to cancel the world tour - maybe another chance next year?
I converted to Coastal digital controls and use the top-loader as a very
Scott, congratulations on your crossing to Hawaii. Sorry you had to cancel the world tour - maybe another chance next year?
I converted to Coastal digital controls and use the top-loader as a very
|
By
Jamie Wendell
·
#51848
·
|
|
Re: Top loading galley fridge/freezer used as a fridge: No?
Hello,
I was so annoyed by the fridge freezer that I took it into parts and replaced the humid insulation. You can see me doing this job in my video on our youtube.
But its a hell of a job.
In our
Hello,
I was so annoyed by the fridge freezer that I took it into parts and replaced the humid insulation. You can see me doing this job in my video on our youtube.
But its a hell of a job.
In our
|
By
Oliver Henrichsen, SV Vela Nautica
·
#51847
·
|
|
Re: Top loading galley fridge/freezer used as a fridge: No?
Except for the seal movement (need to check when I am back on the boat) my experience is the same as Arno. I also have the raised “grill” type platform on the bottom & agree with his analysis on
Except for the seal movement (need to check when I am back on the boat) my experience is the same as Arno. I also have the raised “grill” type platform on the bottom & agree with his analysis on
|
By
Teun BAAS
·
#51846
·
|
|
Re: Top loading galley fridge/freezer used as a fridge: No?
Hi Scott,
We use our galley-top-fridge/freezer as fridge 100% of the time. It does accumulate water on the bottom, because of this ours has a raised bottom with holes in it to keep stuff dry. Every
Hi Scott,
We use our galley-top-fridge/freezer as fridge 100% of the time. It does accumulate water on the bottom, because of this ours has a raised bottom with holes in it to keep stuff dry. Every
|
By
Arno Luijten
·
#51845
·
|
|
Re: would someone please explain how this works?
Thanks Gary,
He mentioned the "differential girdle spring" on the upper end of the grammeters. This must be an early video because the differential girdle spring was found to be a problem and later
Thanks Gary,
He mentioned the "differential girdle spring" on the upper end of the grammeters. This must be an early video because the differential girdle spring was found to be a problem and later
|
By
CW Bill Rouse
·
#51844
·
|
|
Re: Lewmar acrylic lens replacement on Amel 54
Hi Teun,
Your boat "Amelit" has a fantastic sailing history. I followed the videos before we bought our 54 in 2015. I can imagine what the sun in the Pacific did to the rubbers, glad you were able to
Hi Teun,
Your boat "Amelit" has a fantastic sailing history. I followed the videos before we bought our 54 in 2015. I can imagine what the sun in the Pacific did to the rubbers, glad you were able to
|
By
Barry Connor
·
#51843
·
|
|
Top loading galley fridge/freezer used as a fridge: No?
Hi all,
Hope you're all doing well and staying healthy. Our A54 has a swing-door fridge (we replaced the original with a larger MS160 model with hidden evaporator plate), the galley top loading
Hi all,
Hope you're all doing well and staying healthy. Our A54 has a swing-door fridge (we replaced the original with a larger MS160 model with hidden evaporator plate), the galley top loading
|
By
Scott SV Tengah
·
#51842
·
|
|
Re: would someone please explain how this works?
Rockwell did an in depth training video on their new and improved "RetroEncabulator". I think you'll find all your questions answered ... here:
.
https://youtu.be/RXJKdh1KZ0w
.
.Cheers!
Rockwell did an in depth training video on their new and improved "RetroEncabulator". I think you'll find all your questions answered ... here:
.
https://youtu.be/RXJKdh1KZ0w
.
.Cheers!
|
By
Gary Wells
·
#51841
·
|