|
Re: [Amel] Re: Sink water
Hi Dave, The previous owner of our Mango was a ship builder(Classic Yachts), and he did just what you sugested.
He fitted a sump in the front shower with float switch and a diaphram pump behind the
Hi Dave, The previous owner of our Mango was a ship builder(Classic Yachts), and he did just what you sugested.
He fitted a sump in the front shower with float switch and a diaphram pump behind the
|
By
Conn Williamson <connwilliamson@...>
·
#10899
·
|
|
Re : [Amel] salt water pump
Hi,
The perkins 4154 has 2 water pumps: a Sea water pump and a Fresh water pump.
Check the parts manual:
http://www.kp44.org/ftp/Perkins_4-154_Parts_Manual.pdf
the Sea water pump is a
Hi,
The perkins 4154 has 2 water pumps: a Sea water pump and a Fresh water pump.
Check the parts manual:
http://www.kp44.org/ftp/Perkins_4-154_Parts_Manual.pdf
the Sea water pump is a
|
By
Serge Tremblay <laetitiaii@...>
·
#10898
·
|
|
Re: [Amel] Re: Sink water
All,
seeing the discussion is centered around sinks, we averted a calamity of sorts, the PVC coupling at the galley sink drain cracked and broke, allowing about a gallon of water to leak before we
All,
seeing the discussion is centered around sinks, we averted a calamity of sorts, the PVC coupling at the galley sink drain cracked and broke, allowing about a gallon of water to leak before we
|
By
KIMZ YAHOO <kcvabeach@...>
·
#10897
·
|
|
Re: Sink water
I never understood why Amel changed the sink drainage from the way it is on the Maramu which simply drains overboard.
One thing that does drain to the sump in the Maramu is the shower drain and if we
I never understood why Amel changed the sink drainage from the way it is on the Maramu which simply drains overboard.
One thing that does drain to the sump in the Maramu is the shower drain and if we
|
By
Dave_Benjamin
·
#10896
·
|
|
Re: Efector Anchor Chain Counter Sensor
George and Kim,
I forgot the voltage, but what you have seems low. Are you using Chain Counter Sensor IB5124? This is a 2 wire version and is what I installed...frankly it was a bright day and I
George and Kim,
I forgot the voltage, but what you have seems low. Are you using Chain Counter Sensor IB5124? This is a 2 wire version and is what I installed...frankly it was a bright day and I
|
By
Judy and Bill aboard SV BeBe <yahoogroups@...>
·
#10895
·
|
|
Re: [Amel] salt water pump
Andy,
What function is the pump performing, e.g., engine cooling or....? Our Maramu has the 4154 but no centrifugal pump.
Dave
s/v Air Ops
Maramu #104
Sea of Cortez, Mx
[Non-text portions of this
Andy,
What function is the pump performing, e.g., engine cooling or....? Our Maramu has the 4154 but no centrifugal pump.
Dave
s/v Air Ops
Maramu #104
Sea of Cortez, Mx
[Non-text portions of this
|
By
David Wallace
·
#10893
·
|
|
Re: Sink water
Fred,
As I am sure that you are aware, the sink gravity drains into the sump located in the engine room. The total length of hose is less than 2 meters. It should be fairly easy to run a piece of
Fred,
As I am sure that you are aware, the sink gravity drains into the sump located in the engine room. The total length of hose is less than 2 meters. It should be fairly easy to run a piece of
|
By
Judy and Bill aboard SV BeBe <yahoogroups@...>
·
#10892
·
|
|
Re: [Amel] Sink water drainage
Hello Fred,
The sink drains directly down into the grey water sump at the front of the engine room. There is no valve or pump so you have a blockage somewhere in the pipe. Could be an accumulation of
Hello Fred,
The sink drains directly down into the grey water sump at the front of the engine room. There is no valve or pump so you have a blockage somewhere in the pipe. Could be an accumulation of
|
By
John and Anne on Bali Hai
·
#10894
·
|
|
Re: salt water pump
This may or may not help you...
Is there an in-line heat exchanger (oil cooler) for the transmission located in the water supply line between the sea chest and the engine pump? They are generally
This may or may not help you...
Is there an in-line heat exchanger (oil cooler) for the transmission located in the water supply line between the sea chest and the engine pump? They are generally
|
By
Judy and Bill aboard SV BeBe <yahoogroups@...>
·
#10891
·
|
|
Sink water
Hello,
We are the happy new owners of a 2003 Super Maramu and are now learning the many systems this boat has.
Yesterday, my wife tolf me the water in the sink would not drain anymore. After cleaning
Hello,
We are the happy new owners of a 2003 Super Maramu and are now learning the many systems this boat has.
Yesterday, my wife tolf me the water in the sink would not drain anymore. After cleaning
|
By
fhoudaille <fhoudaille@...>
·
#10890
·
|
|
salt water pump
Dear all, we are the new owners of an Amel Maramu. We are hoping to get some advice on the cause of a problem with a saltwater centrifugal pump for a Perkins 4154 engine and what pump we should
Dear all, we are the new owners of an Amel Maramu. We are hoping to get some advice on the cause of a problem with a saltwater centrifugal pump for a Perkins 4154 engine and what pump we should
|
By
Andy Croney
·
#10889
·
|
|
Re: [Amel] Dessalator 40 GPH Membranes
Hi George and Kim. all I can say is WOW, I have got to start this.
Danny
To: amelyachtowners@...
Sent: Sunday, 3 June 2012 1:14 PM
Subject: RE: [Amel] Dessalator 40 GPH Membranes
Hi
Hi George and Kim. all I can say is WOW, I have got to start this.
Danny
To: amelyachtowners@...
Sent: Sunday, 3 June 2012 1:14 PM
Subject: RE: [Amel] Dessalator 40 GPH Membranes
Hi
|
By
Danny and Yvonne SIMMS
·
#10888
·
|
|
Re: [Amel] Dessalator 40 GPH Membranes
Thanks Eirc, if you are leaving the boat, say for a month or more, do you back flush with fresh water beforehand and leave it like that, then flush again on return before use?
How long can you leave
Thanks Eirc, if you are leaving the boat, say for a month or more, do you back flush with fresh water beforehand and leave it like that, then flush again on return before use?
How long can you leave
|
By
Danny and Yvonne SIMMS
·
#10887
·
|
|
Re: Efector Anchor Chain Counter Sensor
Hi all,
We have acquired the sensor and wired according to Bill's directions, but
once the power is turned back on the light on the sensor is failing to
illuminate. George checked voltage output
Hi all,
We have acquired the sensor and wired according to Bill's directions, but
once the power is turned back on the light on the sensor is failing to
illuminate. George checked voltage output
|
By
Kimberly Cerillo <kcvabeach@...>
·
#10886
·
|
|
Re: [Amel] Re: headsail idea
Our Mango #28 has had an inner forestay about 12 inches behind the furler fitted I presume
from the factory. It is mainly used for sailing downwind poled out wing to wing, but yes is also
there for
Our Mango #28 has had an inner forestay about 12 inches behind the furler fitted I presume
from the factory. It is mainly used for sailing downwind poled out wing to wing, but yes is also
there for
|
By
Conn Williamson <connwilliamson@...>
·
#10885
·
|
|
Re: [Amel] Maramu genoa
Dave, we are interested, can you email me direct at gmcerillo@... with price?
George
Dave_Benjamin <dave_benjamin@...> wrote:
Dave, we are interested, can you email me direct at gmcerillo@... with price?
George
Dave_Benjamin <dave_benjamin@...> wrote:
|
By
KIMZ YAHOO <kcvabeach@...>
·
#10884
·
|
|
Maramu genoa
If any of my fellow Maramu owners are interested in a lightly used genoa (one cruising season in Mexico), we are looking at selling our genoa. No issues or problems with the sail but we are planning
If any of my fellow Maramu owners are interested in a lightly used genoa (one cruising season in Mexico), we are looking at selling our genoa. No issues or problems with the sail but we are planning
|
By
Dave_Benjamin
·
#10882
·
|
|
Re: [Amel] Re: headsail idea
Graham,
Could you send me any photos or files that you haveof this?
Fair Winds
Eric
Amel Super Maramu #376 Kimberlite
_____
From:
Graham,
Could you send me any photos or files that you haveof this?
Fair Winds
Eric
Amel Super Maramu #376 Kimberlite
_____
From:
|
By
eric freedman
·
#10881
·
|
|
Re: [Amel] Dessalator 40 GPH Membranes
Hi Danny
We also filter all dock water, our membranes needed to be replaced after 10
years of use.good bang for the buck.
George and Kim
From:
Hi Danny
We also filter all dock water, our membranes needed to be replaced after 10
years of use.good bang for the buck.
George and Kim
From:
|
By
Kimberly Cerillo <kcvabeach@...>
·
#10883
·
|
|
Nirvana back in business apparently...
Ran across this - http://www.nirvanabv.com/nirvana-restarts-production/
I have emailed them to see if parts and support will be available.
Ran across this - http://www.nirvanabv.com/nirvana-restarts-production/
I have emailed them to see if parts and support will be available.
|
By
Dave_Benjamin
·
#10880
·
|