Hi Oliver, Do I understand from below message that on the A54 the triactic antenna wire/connection dead ends behind the MC shower lamp? So coming from AMEL Yard on delivery this is not connected

Hi all, I have a Volvo D3-110i-C with low oil pressure. I’m told by the local Volvo dealer that the engine will have to be taken out in order to replace the oil pump. I’m wondering what other

Hi Craig and I was just on the phone with Roger Underwood and he does indeed have the special turnbuckle but neither one of us can remember if the one for the Santorin is the same as the one for the

Thanks, Bill.

Craig, Joel once told me that Nance & Underwood have the special turnbuckle, but you can also email Roger Underwood roger"at"nanceandunderwood.com to verify.

Paul, You should ask Amel. SAV"at"amel.fr CW Bill Rouse

Bill, Does the Lewmar switch recall apply to all or is there a date? Cheers, Paul S/Y Ya Fohi - Amel 54 #98 - Grenada

Hi Bill, How do Nance and Underwood handle the "special turnbuckle" on the headstay, which is shorter than standard ones? I used ACMO last time and, of course, it's not an issue with them, but since

Hello, You find the mizzen cables behind the master shower lamp. My Mizzen to Mainmast stay antenna wire (triatic??) ended there too. So I had to route it from there to the navseat. There is a cable

Dear forum, Does anyone have drawings, pictures or other information on how the cables are routed into the mizzen and main masts of a A54 and how to access the cables for the mizzen? One of the things

Hi Thomas, Actually I found out the very same thing when I replaced the chain counter. Mine was getting pretty bad with the the LCD readout. So when I replaced it I found the same issue. One of those

Download this file from the FILES section of the group's website: Standing Rigging Install and Tune SN SM and 54 revised 04-27-2020.pdf This new revision includes mainmast intermediates which were

Hi Ken! Hope you both feeling good looked down there. Here a link with a better photo and more rigging

Stefan, Do you have a better photo of the document? It would really be nice to have if I ever have to re-rig! Thanks, Ken Powers Aquarius SM2K262

Hallo Wolfgang, Vielen dank fur diese Tip. I habe die Bestellung gemacht. Gruss, Arno

Hi all, I got a bit red faced the other day when I realised the lewmar chain counter was still using factory default parameters, including a 300mm chain per revolution. I measured the reality: ~450mm

Hi Arno, It was www.foliencenter24.com Wolfgang Weber SY Elise Amel 54#162

Hi Wolfgang, Thanks for the information. Do you remember where you bought that stuff? I have trouble finding an online store that sells this stuff in boat-size quantities instead of sky-scraper

Kent, I talked to Steve about it. There were some errors in the file that were made by Steve's contractor. That file was removed from the files section. This file may help you. It is everything that

Bill I can't find the file uploaded by Steve Bell for engine room hatch repair. I clicked on the link in the notification email which took me to Files, but I can't find it. Help! Kent SM 243 Kristy