Some years ago there was a post on this forum saying that Dessalator recommended flushing the membranes for storage just with product water, no chemicals. So I started doing that. I just replaced the

You can buy Sodium Metabisulfite on Amazon or eBay. It’s used in beer brewing. Very inexpensive. ~~~⛵️~~~Matt

Hello Bill, I would like to attend if it is possible. thank you, Paul Aramis SM 444 San Francisco

Hi Arnold; I had placed an order for about 10 packs a few years ago. At the time they were 5 Euros per pack. I do see now that they have increased their price to 27.53 Euros on their website. That

Hi Mohammad and Atypisch, wehre did you buy the sterilizing powder? My last bill from Desallator was € 22,95 +20% VAT for the powder! Best and be save Arnold SY Zephyr SM203 Am 22.04.2020 um 18:05

We have followed Dessalator instructions for storage during the off season. We have used the reusable cartridge and powder provided by Dessalator. (5 Euros per use). We have not had any issues.

Paul, I was referring to the fact that Dessalator recommends using the ST2 sterilizing cartridge and 1 packet of their "sterilizing" powder." This is regardless of the size.

Before leaving the boat for an extended period of time I have always used 30ml Sodium Metabisulphite in 7.2l water (approx. 1 bucket), circulated through for half an hour, then allowing the bucket to

Matt, We were never in cold climates We were on the boat continuously with very few exceptions I installed a 24-volt timer and solenoid valve to flush 2x weekly when we were off the boat for a month

So what did you use, if you stored the boat? I heard that propylene glycol (RV water system antifreeze) is a good substitute?...... ~~~⛵️~~~Matt

One of the things that have not been mentioned in this Topic is the possible causes of the deterioration of some materials used for endcaps. There is anecdotal evidence that points to Sodium

Hi Danny, I fully agree we should not dismiss the choices Amel made too easy. I think the choice Amel made with the Desalator watermaker was excellent. But like with everything in life it was also a

Hi Tilo I’m interested to join! Please put me on the list. Regards from Zurich Ruedi Waldispuehl WASABI A54. #55 Von: "main@AmelYachtOwners.groups.io" <main@AmelYachtOwners.groups.io> on behalf

Hi Bill I’m interested to join! Please put me on the list. These is a great idea, thanks. Schedule is fine for me, Topics 2 and 6 are my favourites. Sorry I’m probably a bit late because I was

Hello Heinz, Thank you very much for your interest into the IDN system. Could you please send an e-mail to me at: diego.demiguel@... ? then I will reply your e-mail with more detailed info, technichal

Thanks to you Ian. I am planning to cross the Atlantic in december and to go to Florida. I see that you are in Fort Lauderdale, so we will be able to meet each other in the real world :-) All the

Hey all, not to drift the thread slightly, but my dessalator has been leaking pure product water from somewhere in the assembly I've yet to trace. It isn't coming from the two fresh water hoses that

Just after buying Aquarius I had new membranes installed, and the white nylon end caps were no good, so I had them replaced them with brand new black ones from Dessalator. Two years later in New

Peter, I added you. You need to cast the vote yourself. I cannot do that for you. CLICK HERE TO VOTE: Vote Now

Does anyone have a source for a replacement LED for aB&G Hydra 2000 8-button display? With best regards, Mark Skipper Sailing Vessel - Cream Puff - SM2K - #275 Currently cruising -