|
Re: Membrane Tube end caps
Hi Mohammad and Atypisch,
wehre did you buy the sterilizing powder? My last bill from Desallator was € 22,95 +20% VAT for the powder!
Best and be save
Arnold
SY Zephyr
SM203
Am 22.04.2020 um 18:05
Hi Mohammad and Atypisch,
wehre did you buy the sterilizing powder? My last bill from Desallator was € 22,95 +20% VAT for the powder!
Best and be save
Arnold
SY Zephyr
SM203
Am 22.04.2020 um 18:05
|
By
Arnold Mente
·
#51684
·
|
|
Re: Membrane Tube end caps
We have followed Dessalator instructions for storage during the off season. We have used the reusable cartridge and powder provided by Dessalator. (5 Euros per use). We have not had any issues.
We have followed Dessalator instructions for storage during the off season. We have used the reusable cartridge and powder provided by Dessalator. (5 Euros per use). We have not had any issues.
|
By
Mohammad Shirloo
·
#51683
·
|
|
Re: Membrane Tube end caps
Paul,
I was referring to the fact that Dessalator recommends using the ST2 sterilizing cartridge and 1 packet of their "sterilizing" powder." This is regardless of the size.
Paul,
I was referring to the fact that Dessalator recommends using the ST2 sterilizing cartridge and 1 packet of their "sterilizing" powder." This is regardless of the size.
|
By
CW Bill Rouse
·
#51682
·
|
|
Re: Membrane Tube end caps
Before leaving the boat for an extended period of time I have always used 30ml Sodium Metabisulphite in 7.2l water (approx. 1 bucket), circulated through for half an hour, then allowing the bucket to
Before leaving the boat for an extended period of time I have always used 30ml Sodium Metabisulphite in 7.2l water (approx. 1 bucket), circulated through for half an hour, then allowing the bucket to
|
By
Paul Dowd and Sharon Brown
·
#51681
·
|
|
Re: Membrane Tube end caps
Matt,
We were never in cold climates
We were on the boat continuously with very few exceptions
I installed a 24-volt timer and solenoid valve to flush 2x weekly when we were off the boat for a month
Matt,
We were never in cold climates
We were on the boat continuously with very few exceptions
I installed a 24-volt timer and solenoid valve to flush 2x weekly when we were off the boat for a month
|
By
CW Bill Rouse
·
#51680
·
|
|
Re: Membrane Tube end caps
So what did you use, if you stored the boat?
I heard that propylene glycol (RV water system antifreeze) is a good substitute?......
~~~⛵️~~~Matt
So what did you use, if you stored the boat?
I heard that propylene glycol (RV water system antifreeze) is a good substitute?......
~~~⛵️~~~Matt
|
By
Matt Salatino
·
#51679
·
|
|
Re: Membrane Tube end caps
One of the things that have not been mentioned in this Topic is the possible causes of the deterioration of some materials used for endcaps.
There is anecdotal evidence that points to Sodium
One of the things that have not been mentioned in this Topic is the possible causes of the deterioration of some materials used for endcaps.
There is anecdotal evidence that points to Sodium
|
By
CW Bill Rouse
·
#51678
·
|
|
Re: Membrane Tube end caps
Hi Danny,
I fully agree we should not dismiss the choices Amel made too easy. I think the choice Amel made with the Desalator watermaker was excellent. But like with everything in life it was also a
Hi Danny,
I fully agree we should not dismiss the choices Amel made too easy. I think the choice Amel made with the Desalator watermaker was excellent. But like with everything in life it was also a
|
By
Arno Luijten
·
#51677
·
|
|
Re: ZOOM Meeting Technical Questions:
#ZOOM
Hi Tilo
I’m interested to join! Please put me on the list.
Regards from Zurich
Ruedi Waldispuehl
WASABI A54. #55
Von: "main@AmelYachtOwners.groups.io" <main@AmelYachtOwners.groups.io> on behalf
Hi Tilo
I’m interested to join! Please put me on the list.
Regards from Zurich
Ruedi Waldispuehl
WASABI A54. #55
Von: "main@AmelYachtOwners.groups.io" <main@AmelYachtOwners.groups.io> on behalf
|
By
Rudolf Waldispuehl
·
#51675
·
|
|
FW: [AmelYachtOwners] ZOOM Meeting of Members
#ZOOM
#poll
Hi Bill
I’m interested to join! Please put me on the list. These is a great idea, thanks.
Schedule is fine for me, Topics 2 and 6 are my favourites.
Sorry I’m probably a bit late because I was
Hi Bill
I’m interested to join! Please put me on the list. These is a great idea, thanks.
Schedule is fine for me, Topics 2 and 6 are my favourites.
Sorry I’m probably a bit late because I was
|
By
Rudolf Waldispuehl
·
#51674
·
|
|
Re: Switch on Bilge Float Tube
Hello Heinz,
Thank you very much for your interest into the IDN system.
Could you please send an e-mail to me at: diego.demiguel@... ? then I will reply your e-mail with more detailed info, technichal
Hello Heinz,
Thank you very much for your interest into the IDN system.
Could you please send an e-mail to me at: diego.demiguel@... ? then I will reply your e-mail with more detailed info, technichal
|
By
Diego de Miguel (Sailing Living Lab) Amel Sharki
·
#51673
·
|
|
Re: Switch on Bilge Float Tube
Thanks to you Ian.
I am planning to cross the Atlantic in december and to go to Florida.
I see that you are in Fort Lauderdale, so we will be able to meet each other in the real world :-)
All the
Thanks to you Ian.
I am planning to cross the Atlantic in december and to go to Florida.
I see that you are in Fort Lauderdale, so we will be able to meet each other in the real world :-)
All the
|
By
Diego de Miguel (Sailing Living Lab) Amel Sharki
·
#51672
·
|
|
Re: Membrane Tube end caps
Hey all, not to drift the thread slightly, but my dessalator has been leaking pure product water from somewhere in the assembly I've yet to trace. It isn't coming from the two fresh water hoses that
Hey all, not to drift the thread slightly, but my dessalator has been leaking pure product water from somewhere in the assembly I've yet to trace. It isn't coming from the two fresh water hoses that
|
By
Davi Rozgonyi
·
#51671
·
|
|
Re: Membrane Tube end caps
Just after buying Aquarius I had new membranes installed, and the white nylon end caps were no good, so I had them replaced them with brand new black ones from Dessalator. Two years later in New
Just after buying Aquarius I had new membranes installed, and the white nylon end caps were no good, so I had them replaced them with brand new black ones from Dessalator. Two years later in New
|
By
Ken Powers SV Aquarius
·
#51670
·
|
|
Re: ZOOM Meeting of Members
#ZOOM
#poll
Peter,
I added you. You need to cast the vote yourself. I cannot do that for you. CLICK HERE TO VOTE: Vote Now
Peter,
I added you. You need to cast the vote yourself. I cannot do that for you. CLICK HERE TO VOTE: Vote Now
|
By
CW Bill Rouse
·
#51669
·
|
|
B&G LED Replacement
Does anyone have a source for a replacement LED for aB&G Hydra 2000 8-button display?
With best regards,
Mark
Skipper
Sailing Vessel - Cream Puff - SM2K - #275
Currently cruising -
Does anyone have a source for a replacement LED for aB&G Hydra 2000 8-button display?
With best regards,
Mark
Skipper
Sailing Vessel - Cream Puff - SM2K - #275
Currently cruising -
|
By
Mark Erdos
·
#51668
·
|
|
Re: tb/custom broker BRISBANE/COOMERA QLD AUSTRALIA/AYOGF
To all, non-AUSTRALIAN, AMEL owners planning to bring major parts, equipment into AUSTRALIA tax-free under the international customary “YACHTS IN TRANSIT” schedule.
Following up on my earlier
To all, non-AUSTRALIAN, AMEL owners planning to bring major parts, equipment into AUSTRALIA tax-free under the international customary “YACHTS IN TRANSIT” schedule.
Following up on my earlier
|
By
Teun BAAS
·
#51667
·
|
|
Re: ZOOM Meeting of Members
#ZOOM
#poll
Hi Bill
Please put me on the list. I like this idea of an virtual event.
Schedule is fine for me, Topics 2 and 6 are my favourites.
Thx
Peter
SM 003 / Neustadt i.H.
(Sent from mobile device)
Hi Bill
Please put me on the list. I like this idea of an virtual event.
Schedule is fine for me, Topics 2 and 6 are my favourites.
Thx
Peter
SM 003 / Neustadt i.H.
(Sent from mobile device)
|
By
Peter Jaeger
·
#51666
·
|
|
Re: Membrane Tube end caps
Hi, I echo the call to be careful when dismissing the equipment Amel has installed.
while everyone has their own experiences of a variety of Amel systems and equipment it must always be remembered
Hi, I echo the call to be careful when dismissing the equipment Amel has installed.
while everyone has their own experiences of a variety of Amel systems and equipment it must always be remembered
|
By
Danny and Yvonne SIMMS
·
#51665
·
|
|
Re: Membrane Tube end caps
Expensive. But I’ve had nothing but top notch support froM desalator as well. Weekends, evenings in France doesn’t matter. And fast delivery.
Porter
A54-152
Expensive. But I’ve had nothing but top notch support froM desalator as well. Weekends, evenings in France doesn’t matter. And fast delivery.
Porter
A54-152
|
By
Porter McRoberts
·
#51664
·
|