JP, I sent you a private message -- Best, CW Bill Rouse Amel Owners Yacht School 720 Winnie St Galveston Island, TX 77550 +1(832) 380-4970 My Calendar

Hi Bill, Thanks. I also took the entire holder to the shop… to verify the interior measurements. I suspect the new ones will be made to a closer tolerance. Dessalator after sales service has been

FYI, Dessalator originally made the membrane tube end caps out of white nylon. Emek copied Dessalator. Dessalator's choice of Nylon proved to be the wrong choice. Dessalator later made end caps from a

Hi Eric, I had a pair of white end caps made by EMEK marine and these were not good. (I discarded them after just looking at them) But even from the factory, immediately after installation, the

As of the time of this email, I have added the following additional members, bringing the total to 57: Mike Johnson Richie Whyte Brian Riggs Jeremie MaillouxULRICH DANGELMEYER Peter Forbes Roque Ben

Hi Eric, No idea. Need to be on more intimate terms with the governor. I heard today from the dockmaster in the marina where Aletes is that a captain of a mega yacht flew in, told the authorities that

Hi Jean-Pierre, Did you have white colored end caps? If you did not and have the black end caps, what modifications did you do to the new end caps? Fair Winds Eric Amel Super Maramu #376

Hello Bill, I’d like to address the subject of the Dessalator membrane holders. I consider them under engineered, especially the end caps. (Duo60 and Duo 100 models) I’ve had a NZ shop replicate

AMELIT’s previous (original) owner replaced the OEM DESSALATOR, after 4 years, with the SPECTRA NEWPORT II. I can NOT contribute anything on the DESSALATOR discussion nor want to hijack this

For those planning to attend the ZOOM meeting, please post questions to the Topic " ZOOM meeting technical questions" by replying to this email. Tilo Peters will likely respond to these technical

Apologies for the late response. A great idea Bill, thanks. Please put Nomad on the list tentatively as we, weather depending (again), may shove off from Martinique of the 24th of April. I believe

By all means include me, Bill. Of particular interest at the moment are 1. Watermaker maintenance. 2. Running rigging maintenance and best practices for replacement Actually, just about any topic

Hello Bill and All, I would be interested in the audio only option, as it seems that 35 active participants would be plenty for the relatively short meeting time. Any topic would of interest,

Please add Charles Bell Shipbldr2000@...

Hello Bill, I am interested in just listening if possible. If not please add me to your list. Thanks. Dieter Fal-lera Sharki #135 Von: main@AmelYachtOwners.groups.io

Bill, ZOOM also has the option for participants just to call in iso using computer/laptop/mobile app. Best Regards Teun April 20, 202009:16:58

Bill Pls add me. Best Regards Teun SV AMELIT A54 #128 Currently on the hard in COOMERA (near BRISBANE) QLD AUSTRALIA April 20, 202009:13:21 USA cell: +1 832 477 8842 AUSTRALIA

Hello all. Just make sure that you use the latest version of Zoom. There are a number of significant security vulnerabilities associated with the zoom application.

Hi Bill, Many THX on your enormous engagement! Please add me to your audience too. just for listening and viewing, actually I´ve no personal issues on these. Taking part from the enormous experience

Bill Add me to the list Ben Driver Former SM owner #347 La Bella Vita