He had an Euros and he crossed with it as well. I need to find in muy archives. JL <laetitiaii@...> wrote: Swiss built sloop  <jose.luis.isasi@...> a écrit : of upgrading now.

Hola Jose Luis,   I beleive the hungarian sailor has a boat called Carina, 19 feet Swiss built sloop   check                    http://www.meder.hu   Serge, Opera Mango #51 ---

In our 79 Maramu we had an EOS 3 or 4 burner that we replaced with a Force 10. The company is still in business but I am not too impressed with their stoves.

Hi Matt and Russ, I have worked in my Euros since 2005. It is a very safe boat and I would say that it is a solid base for a trip around the world but of course it needs to be prepared. It is

Hi Matt, I have an offer on a 1970 Euros. What has been your experience with your boat? Russ

Hi Dave, i'm sure that in Maramu, like in mine Sharki and in all 80' Amel models, the main traveller was composed by a continuous line moved by a drum with an handle fixed over a wooden block at the

For Goiot parts for hatches etc., call PRECOURT in Canada. Person to speak to is David and the phone # 1-418-286-2296. He was very helpful. Also he may ask you to take a digital photo and send it to

Hi, I'm new to the group-looking for the other owners of Amel Euros 39ft-to exchange comments and ideas about this design:) I'm in Oz and new owner of 'DARIEN' Euros No.88 Best Regards matt

We had the same problem a year ago with the condensate pan, except it was in the forward A/C. It was dripping into the forward bilge instead of flowing through the drain line to the main bilge.

Jeffery, For what it is worth, I thought that I had an A/C leak in the salon; however it turned out to be a slight leak under the galley sink. The galley sink faucet was leaking into the bilge area

I have an Amel Super Maramu 2000, hull 323, built in 2002 to 2003 specs. The a/c in the salon (only) leaks condensate, which eventually enters the floor compartments in front of and under the sink,

Yes, message 'tags' would be great. I'll check with Yahoo on this. Richard wrote:

Hi Richard The Boat locator feature was nice! Hope more Amel owners will sign up there. Could it be possible to get different sub-titels like "sails", "electrical", "navigation", "anchors", and so on

Located in Trinidad (on the hard for 9 years). See on ebay or email sailingbebe@...

Hello Richard, Well that worked perfectly. Lots of work but produced results. Thank you very much. Bill Rahmig

The Onan MDKV has what I call a "computer start" sequence...Press the start button and a few clicks and buzzes later, if the computer likes what it senses, the starter motor will engage on the diesel

If anyone has a list of various capacitors used for electric motors and compressors on a Super Maramu 2000, please post any or all on this site. They can be purchased in an electronics shop for a few

Great information. Thanks a lot John and Anne I will check the capacitors and fuses and buy some spares to keep. My own experience paying people to work on my previous Beneteau 361 told me that

I agree with Anne and John, SM319 message : DO NOT FORGET that you must us the thermal protection fuse it is very important (a bi-metatl can failed). Normaly the old is ok (new cost

Electric fan heaters have, or should have, a thermal cutout/fuse to disconnect the power if the element is over heating. This is in addition to the thermostat. I have a free standing fan heater