Stephan It could be a voltage issue. The same happened to me here in one of the Caribbean islands where the shore voltage was insufficient. If the problem has manifested itself on shore power try

Hello there, If you put the machine in the search box you will find five messages which are not very helpful. However if you go to "Files" you will find complete collection of all the messages from

Does anyone have the repair manual for the Thomson Australe 3 washing machine (used on the SMM)? Mine will not start. I push the start button, the red light comes on, then nothing: no water, no

I have put a couple of pics in the photos section. These were taken on my last boat, a 1985 Oyster 435.The drive unit originally had nylon planetary gears and these had a very limited life. I went

Hi Everyone, I just uploaded a file about galvanic corrosion. Maybe it is helpful. Regards Claus, S/V Jonathan, SM #196

Hi Everyone. Since Bill & Judy Rouse posted related to their bilge grounding strap failure I have inspected my strap and found it intact. My boat is of about the same vintage so I am trying to figure

To the group & JoeMac4Sail, Most prop manufacturers we have spoken with ask "what is a shaft alternator?". The few that were familiar with the alternators were not sure if their props would work. We

Vito, today I am in NY. Saturday Colombia on business. then to St Martin, haul the boat paint and sail back to NY. have you found work in NZ? Have you heard from Lucia? fair winds, eric _____

Hi Eric Not everyone has a great passage. You dont get strong winds, what you do get is light to no wind with the normal trade wind swell. Makes for very unconfortable conditions. We are in NZ. Will

Hi Vito, Ian of Pen Azen mentioned that amazing passage. With respect to the ground strap, I was not the first to discover the problem. It runs along the forward end of the wet bilge and is

Hi Eric How are you. I read with intrest about this grounding strap in the bildge. I did not know that it was even there. I will need to check and see what condition its in. What did you look for and

Dear Bill & Judy, Thanks for the info. Have a safe passage. If conditions are right, try using the genoa and mizzen ballooner. Fair Winds, Eric _____ From:

Eric, There are photos and specs of the replacement ground strap in an album titled Bilge - Ground Strap at http://ph.groups.yahoo.com/group/amelyachtowners/photos/browse/d3f4 Best, Bill s/v BeBe

Eric, All we had was a 1/2" bit and it was too small. We had to work the bit in the hole to enlarge it. The new strap is 1/8" copper and drills easily. Unfortunately I did not measure the keel

Hi, how large is the hole that you drilled in the end of the bilge grounding strap to acomodate the keel bolt? I am headed off to the carib to replace it and want to make sure i have the right size

Two photos are posted now in our Moon Dog folder, I guess we forgot to post them before. The camera flash makes it appear that the new section is much lighter than the rest of the paneling. In

Hi All Thanks guys for your quick replies. I probably should have told you all that the liferaft is a 10 man cannister (big bugger),which came of our last cruiser (a bendy toy). I can see that a lot

John, I could not find your vanity photos. would you please direct me to them. thanks Eric Amel Super Maramu #376 Kimberlite

Judy and I are cruising and need to be able to carry extra fuel in Jerry Cans. We found a 18.9 liter Jerry Can that we are able to fit 10 into the "Liferaft Locker." We placed the liferaft into the

After we purchased our Santorin and before we made a trans-atlantic crossing we meticulously checked out all our safety gear. The liferaft, in a valise, was stowed in the "liferaft locker" midships