|
Re: Xantrex Link 10 Battery Monitor
Hi Tom,
I don't know what your longer term electrical vision is, but I replaced mine with the Victron BMV 712. It has a nice Blue Tooth interface and app on your phone. I already had a Victron Blue
Hi Tom,
I don't know what your longer term electrical vision is, but I replaced mine with the Victron BMV 712. It has a nice Blue Tooth interface and app on your phone. I already had a Victron Blue
|
By
Dan Carlson
·
#51476
·
|
|
Re: Xantrex Link 10 Battery Monitor
Hi Tom,
I had the same amd since 2017 I am happy with this replacement for 130 euro incl. 21% tax:
https://tbs-electronics.com/product/expert-lite-battery-monitor-12v-24v
It is a modern
Hi Tom,
I had the same amd since 2017 I am happy with this replacement for 130 euro incl. 21% tax:
https://tbs-electronics.com/product/expert-lite-battery-monitor-12v-24v
It is a modern
|
By
Stefan Jeukendrup
·
#51475
·
|
|
Re: Bow seat on Amel 54
Hi Barry
thank you for the nice photo of the bow but I was interested in the wooden seat itself !
thanks any way
Nick
--
Nicolas Klene
DarNico
SM2K # 471
In Marseille
Hi Barry
thank you for the nice photo of the bow but I was interested in the wooden seat itself !
thanks any way
Nick
--
Nicolas Klene
DarNico
SM2K # 471
In Marseille
|
By
Nicolas Klene
·
#51474
·
|
|
Xantrex Link 10 Battery Monitor
The plastic over the buttons on my Link 10 is cracking and falling off so I'm considering replacing it. I'm wondering if I choose the Xantrex Link Pro or Link Lite if I need to change the shunt and
The plastic over the buttons on my Link 10 is cracking and falling off so I'm considering replacing it. I'm wondering if I choose the Xantrex Link Pro or Link Lite if I need to change the shunt and
|
By
Thomas Kleman
·
#51473
·
|
|
Re: Broken water level dipstick
In the end i used a 12mm dowel and sanded it down (stuck it in a drill) so it just fit inside the broken pipe. Then with a full tank of water i used strong glue on half the length and stuck it in the
In the end i used a 12mm dowel and sanded it down (stuck it in a drill) so it just fit inside the broken pipe. Then with a full tank of water i used strong glue on half the length and stuck it in the
|
By
Eamonn Washington
·
#51472
·
|
|
Tonight 16 April at 0300 UTC our group may been down for maintenance for a few hours.
#IMPORTANT
All,
Tonight 16 April at 0300 UTC our group may been down for maintenance for a few hours.
Best,
CW Bill Rouse
Amel Owners Yacht School
720 Winnie, Galveston Island, Texas 77550 USA
----------
All,
Tonight 16 April at 0300 UTC our group may been down for maintenance for a few hours.
Best,
CW Bill Rouse
Amel Owners Yacht School
720 Winnie, Galveston Island, Texas 77550 USA
----------
|
By
CW Bill Rouse
·
#51471
·
|
|
Re: Bow seat on Amel 54
Hi Nicolas Klene
See the photo below.
The Amel 54 has the bow set up to put a hinged wooden lift up board across.
As mentioned the lines from the Parasailor come down just where the board fits, so had
Hi Nicolas Klene
See the photo below.
The Amel 54 has the bow set up to put a hinged wooden lift up board across.
As mentioned the lines from the Parasailor come down just where the board fits, so had
|
By
Barry Connor
·
#51470
·
|
|
Re: Broken water level dipstick
James,
How was your wife after that?
Peter
Carango
Amel 54 #035
La Rochelle
James,
How was your wife after that?
Peter
Carango
Amel 54 #035
La Rochelle
|
By
Peter Forbes
·
#51469
·
|
|
Re: Broken water level dipstick
Hi Eamonn
My wife broke our water stick last year. I inserted a hollow PVC tube with epoxy, reattached the broken end and wrapped with as thin a piece of fibreglass cloth I could find.. Then sanded
Hi Eamonn
My wife broke our water stick last year. I inserted a hollow PVC tube with epoxy, reattached the broken end and wrapped with as thin a piece of fibreglass cloth I could find.. Then sanded
|
By
James
·
#51468
·
|
|
Re: Amel logos
They are stickers. I purchased them last year and installed. A year later they look great.
Thanks, Dan
Feierabend
SM#86
They are stickers. I purchased them last year and installed. A year later they look great.
Thanks, Dan
Feierabend
SM#86
|
By
Dan Wilcox
·
#51467
·
|
|
Amel logos
Hi all I bought some Amel Logos that go on the cabin sides last year. I went to put them on thinking they were vinyl but upon looking at them they have a Avery-dennison backing on them.
Has anyone
Hi all I bought some Amel Logos that go on the cabin sides last year. I went to put them on thinking they were vinyl but upon looking at them they have a Avery-dennison backing on them.
Has anyone
|
By
Alan Grayson
·
#51466
·
|
|
Re: New file uploaded to main@AmelYachtOwners.groups.io
Hi Olaf,
Thanks so much for the Tutorial, Nice job!
Jose
--
Jose Prieto
SV Wayag, SM 323
Currently Alicante, Spain
Hi Olaf,
Thanks so much for the Tutorial, Nice job!
Jose
--
Jose Prieto
SV Wayag, SM 323
Currently Alicante, Spain
|
By
JOSE PRIETO
·
#51465
·
|
|
Re: New file uploaded to main@AmelYachtOwners.groups.io
Sent from my Samsung device
Sent from my Samsung device
|
By
marklesparkle59
·
#51464
·
|
|
Re: Location of the battery bank on an older Super Maramu
Agree with all previous posters. Annie, SM37 has the house batteries, six of them under the passage bunk. They are arranged in two groups of three with the disconnect in the cabinet in the middle.
Agree with all previous posters. Annie, SM37 has the house batteries, six of them under the passage bunk. They are arranged in two groups of three with the disconnect in the cabinet in the middle.
|
By
John Clark
·
#51463
·
|
|
Re: New file uploaded to main@AmelYachtOwners.groups.io
Hello Olaf,
That is a wonderful file that you have written about the removal and repair of the rudder of the Amel Super Maramu #376.
I have a question. Why did you not repair the rudder in
Hello Olaf,
That is a wonderful file that you have written about the removal and repair of the rudder of the Amel Super Maramu #376.
I have a question. Why did you not repair the rudder in
|
By
eric freedman
·
#51462
·
|
|
Re: New file uploaded to main@AmelYachtOwners.groups.io
Olaf,
Your file is very well done, possibly the best that I have seen.
Best,
CW Bill Rouse
Amel Owners Yacht School
+1 832-380-4970 | brouse@...
720 Winnie, Galveston Island, Texas 77550
Olaf,
Your file is very well done, possibly the best that I have seen.
Best,
CW Bill Rouse
Amel Owners Yacht School
+1 832-380-4970 | brouse@...
720 Winnie, Galveston Island, Texas 77550
|
By
CW Bill Rouse
·
#51461
·
|
|
Re: New file uploaded to main@AmelYachtOwners.groups.io
Olaf,
Danke für diesen fantastischen Bericht!
Martin
AMEL 54 #149 CHIARA
Olaf,
Danke für diesen fantastischen Bericht!
Martin
AMEL 54 #149 CHIARA
|
By
luvkante
·
#51460
·
|
|
Re: New file uploaded to main@AmelYachtOwners.groups.io
Il 14/04/2020 16:19, Stephen Davis ha scritto:
Il 14/04/2020 16:19, Stephen Davis ha scritto:
|
By
Giovanni TESTA
·
#51459
·
|
|
Re: New file uploaded to main@AmelYachtOwners.groups.io
Thanks Olaf for the excellent rudder removal tutorial.
Steve
Aloha Sm72
Hawaii
Thanks Olaf for the excellent rudder removal tutorial.
Steve
Aloha Sm72
Hawaii
|
By
Stephen Davis
·
#51458
·
|
|
Re: Hatch handle seat (corners) for Goiot tradition series
Hello Ralf,
Please confirm these are the right pins and I will mail them out to you today.
The hatch corners I have not made yet (no one has sent me a sample and I don't have them on my boat).
I am
Hello Ralf,
Please confirm these are the right pins and I will mail them out to you today.
The hatch corners I have not made yet (no one has sent me a sample and I don't have them on my boat).
I am
|
By
Charles Bell
·
#51457
·
|