After about a year i noticed a smell when i passed the forward head. i eventually tracked it down to the plastic pipe that connects to the copper pipe. The hose was filled with those crystals and

I had the same exact problem at the same exact location on my santorin. The tank is original from amel. the only difference is that the copper tube on my boat is connected to the ground, but it did

As mentioned before, we experienced significant buildup of deposits on the copper tube walls where the head pump hose feeds the holding tank. Thickness on the main head was over 1/4" and the

Mike, To eliminate future problems with buildup of the hard crystal in the line,hang the shower nozzel on the curtain hanger next to the toilet. When you flush(,the right toggle only on the black

We are only the third owners of this Mango. It is in excellent condition. Give us a call for the full scoop. Henry 858 967-6104

I have just sold my supermaramu 2000 and am hoping to replace her with either a well looked after Sharki or Santorin. If anyone has any details of any for sale I would appreciate information.

Gary, I installed the new membranes and end caps. Everything works well. I get an 87-95 micro siemens when the unit is running. I plumbed it as you did. I think I am going to use a chase nipple and

Thanks to those whom responded to my request for information. Peter Pappas 'CALLISTO' #369

We had requested that Shade Tree duplicate the order that they had produced for Ed Steele, SM2 #331. The 3 awnings that we received are each slightly off in measurements and do not fit our

Peter, We bought awnings from Shadetree (see www.intheshd.com) for our Super Maramu #331. We bought three sections to cover the foredeck, main cabin and mizzen deck although we do not use the

Peter, We bought awnings from Shadetree (see www.intheshd.com) for our Super Maramu #331. We bought three sections to cover the foredeck, main cabin and mizzen deck, although we do not use the

I want to have an awning made for my sm 2000. any suggestions for material, color, designe and support would be greatly apprecieated. I am considering a full deck awning. Thank you Peter Pappas

Hi All: I have just uploaded a picture with labels for all parts on the Dessalator Logic Control Board. I have also uploaded an Excel Spread Sheet with Part Names, Part Numbers, Manufacturer, and

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the amelyachtowners group. File : /Dessalator Technical

Nice to have a post about the Mango, especially number 1. If it's the same as ours, no. 28, the centre piece of wood is obviously a step, and the stainless tubing either side seems to tidy that up

We have recently acquired Mango hull no 1 and are in the process of a rebuild. Could anyone advise as to the function of the horizontal bar on the interior side of the forepeak

Gary, With reference to my e-mail of June 30th, I have changed the O-rings on the membrane nipples. Output was a bit less, so I guess I may have had some leakage there, but the output was still

Hi Joel You are absolutely right about the bread machine. I just got one that uses only 500W so my small 12V inverter can handle it. You are also right about using such a big inverter to run a TV,

7 July 2006 Mike: I am a little confused about where this blockage is. Is it in the pipe that comes out the bottom of the holding tank to the through hull? Is it in the hose that enters the top of

After losing our ability to pump out the toilet we discovered the copper intake tube at the bottom of the holding tank was 3/4 blocked by a hard crystaline substance deposited on the wall of the