I will sumarize quickly, so it will be very uncomplete. Maramu and Santorin are of the same size (46 ft), Super maramu is 53ft. There are many difference between Maramu and Santorin. main differences

I am planning to buy an Amel, and I wonder if some one could tell me what are the main differences on Supermaramu, Maramu and Santorin considering 45'and ketch rigging. The pros and cons. Thaks

Hello everyone: I just posted a picture in the watermaker folder showing the control panel I built for my EC sensor with a 110 decibel sonalert, mute/arm switch with LED indicating power on

Dear Ian and Judy, My watermaker has done about 255 hours. We use it for all our onboard water. I bought the DM1 model TDS and now I wish I had the DM2 as it never occurred to me that the screen on

Hi Gary, I have just printed some of your very useful photos on changing the membranes. Is yours a 60lph or 160 lph system? How many hours did you get out of your membranes before you renewed them?

Dear John and Anne, Thanks for another good tip.We are in Blighty for the summer so have promptly been online to ro-man.Their prices look good, tho I'm not sure of they sell the membranes we would

Available from Compass24.com at £206.96 inc. VAT - ref 113430 ________________________________ Sent: 12 June 2006 03:07 To: amelyachtowners@...; tartansailing@... Subject:

Hi, I just finished installing this AIS "radar" unit on my boat and it works great. It only took 2 hours to install. I believe it is a very worthwhile investment Fair Winds, Eric Amel Super

Dear Yves: Thank you for being the first to bring to our attention the problems associated with the salinity sensor on the Dessalator water maker. Your post about the motor fire doesn't specify if

I have spent more than 40 hours drawing complete schematics and logic diagrams for the Dessalator water maker Control Board on my Amel SM 2000 , Hull # 335. I have verified that the salinity sensor

Hi, Can anybody help me. I hve had mooring rope in the thruster due too short mooring rope. Now cannot get bowthruster fully up ca 1,5 cm left. Not sure if get it fully down, but when I dive can move

9 June 2006 REGARDING POWER DRAW OF DESSALATOR 160 l/hr WATER MAKER I have verified that the power consumptions on my Dessalator Water Maker on my hull # 335 Amel SM 2000 are as follows: 1.

The shaft on the main sail furling motor on our SM 2000 fractured in such a way that the shaft remained partially engaged and would work while making a lot of noise. I originally thought that the

There seems to be no doubt that the dessalateur salinity detector is non functioning.A cheap and easy solution is to fit a simple TDS meter in the output line.Such a meter is sold by an American

Hi All, I was away last week and heard that someone tried to get a mooring at The Huntington yacht club. I do not know if they were OCC, Tartan Group members, Amel group members, or just cruising

amelyachtowners@... Dear all, I would like to thank Ian Shepherd for mentioning my « ABSURD SUGGESTION » concerning DESSALATOR. On one hand, it is only facts and facts are stubborn:

Dear Anne and John, Thanks a lot for that.I have been quoted a reasonable price cif Montevideo. My only problem now is to get the darn thing out of Uruguay without incurring their inport duty (20%)

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the amelyachtowners group. File : /HoldingTanksbySinkRev.doc Uploaded by :

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the amelyachtowners group. File : /HoldingTanksbySinkSystem.doc Uploaded

Does anyone know the code to enable lower sideband on a Furuno 1503? Judy Rouse SM Hull 387