Hello again group I'm reposting a message of a couple of months ago in case any new opportunities have emerged. .......... In the process of moving up in yacht size I have placed Amels right at the

It is hard if not impossible to believe that this message deserves a reply. So let him do his ramblings on some other net. Thats my view, John

Speaking of hull issues, I'm considering various hull materials for my next boat. I want strength for occasional brash ice. I do not like steel and aluminum because of corrosion. I am afraid of

Joel, the bigger question has Amel ever put a drain "hole' in the keel? Richard SM 209 --- "Joel F. Potter" <jfpottercys@...>

Joel, I have had to repair some of the epoxy from time to time and would like to know the correct procedure. Thanks Eric sm 376 Kimberlite. Ps sailed from St Marten to new York non stop

Hi Fellow AMEL owners, The keel on all Super Maramus is cast iron, not steel (big difference) and the keel is not encased/encapsulated in fiberglass. It is faired in epoxy, primed, and painted

HI, Hey, did the water come from the keel or from the rudder skeg. The rudder is hollow and will drain. I don't know of any plugs in the Keel itself. The keep should be cast steel incased in

We hauled our SM2000 #404 in Nov, and found that a large amount of water drained from the keel through a small hole about 1-2 cm in diameter in the bottom of the keel. It is round, and looks as if

Owner-in-waiting (long wait) for new 54 would appreciate opportunity to crew - any trip on a 54 after September '07 - can travel. Hugh

Hi - No, we didn't fit a new one. the water-cooled tranny would have required cutting the pulley down 2 inches, and we didn't think te reduced size would produce enough output to make it

Anne and John: Thanks for your advice. Unfortunately I already ordered one from the factory. If something doesn't work out with that, I'll take you up on the offer of the measurements! Cheers and

Performance polars ... Hi Does anyone have performance polars for the Super maramu 2000. I have purchased the Max Sea program and its routing function needs polars in order to work. Can anyone suggest

Hi, Did you fit a new prop alternator?. Patricia Belen Sharki 154

We have an Onan that has gotten sick and appears to need a new Kubota diesel. It's got huge back pressure into the intake manifold. We've replaced the injectors only to have them foul within a few

Hi, I may be interested. Was the alternator working prior to removal? What is the model, output etc as listed on the alternator label. How much do you want for it? Where are you located? Steve

If anyone is interested, I have a prop alternator, bracket and pulley for sale. Recently repowered and it was in the way for the new transmission. Thanks.

Hi Brad, Don't even think about getting a new one from France. Just make one with a strip of coloured perspex or of aluminium.If you do not have the bits of the original just let me know and I will

I believe the only place that you may be able to buy this part is from Amel. Email sav@... and inquire there.

Diane, we have a Ariston MW212K In our SM2 #387. Yesterday it quit working...sort of. The light and fan would come on, but it did not heat with the microwave. I decided, what the hell, let's see

Does anyone know where I could buy a new fuel dipstick for SM 2000 w/ 600 l fuel tank? Thanks in advance, Brad in Seattle