I need to replace the microwave. Any suggestions on what microwave is the best fit for the space allowed above the stove. What company, brand or web-site have you ordered from? What brand does Amel

The dishwasher leaves water in the bottom of the unit at the end of the wash cycle. According to the manual (which is in French but I used internet translation), there is a problem with a pump that

Is the problem occasional or regular? ************************************** See what's free at http://www.aol.com.

Amel Super Mistral Sport for sale. Euros 5500 ono Kept in very good condition in Barcares South of France. Pontoon available. Sale is due to ill helth and moving back to the UK. Contact me, Roger at

We have an SM 2000 launched July 20001 and in "like new" condition. She is currently in Barcelona, has most AMEL installed options and many additional features. She is fully equipped for serious

Hello-I am looking for a late model SM 2000.Ideally in Europe but must be in very good condition and not to high an engine use. Do not have to have the boat immediately but can purchase

We agree we've done and continue to do it. You may also want to get a 120 volt 30 amp plug as well. This of course means you'll need a new battery charger to handle both 220 and 120. We just

Just a little additional info the shore power cord issue: If you plug in to 220V (as suggested by Eric on Kimberlite), by using a 50 amp shore power plug wired to your 220V black cord, you're fine.

You absolutely do not need to replace the cord with a 4 wire cord. the stock cord is more than sufficient as the boat does not use the white neutral wire as normally found on USA boats. Just get a 50

I am in the process of purchasing a 1998 SM in the US. I have been told by a surveyor and electrician that the stock 220v shore power cord does not meet US electrical code standards, and that the

I need to replace the thru hull handle (die cast) on the valve going from the head to the sea. I have a Sharki made in 1984. Any suggestions as to where I might get a new handle? Thanks. Roy

1998 Supermaramu on sale, perfect conditions. New Sails from North Sails. A lot of accessories and optionals. The boat is located in Rome, Italy. If interested please email me at nuba2004@....

--- In amelyachtowners@..., amelliahona <no_reply@...> wrote: If you are having to pull on the cable to > achieve Thruster locking-pin alignment you might try adjusting the thruster as

Mike Wrote: I last ordered a set of bow thruster seals. "Jeu de joint de propulseur d'etrave" Sept 2005 from Amel. At that time the cost was 33.50 Euros, plus freight. The kit included three foam

Thanks Gary and Bill&Judy for your excellent responses. Aletes remained watertight when refloated, confirming the thruster trunk elevation is indeed above waterline. It would seem we were indeed

Hi, I believe the thruster takes .3 liters of 90 weight gear oil. Fair winds Eric sm 376 kimberlite _____ From: amelyachtowners@... [mailto:amelyachtowners@...] On

Hi Everyone: Thanks Judy for your excellent description. If you are having to pull on the cable to achieve Thruster locking-pin alignment you might try adjusting the thruster as

Mike, Let me try to help you with your questions. I did not design the bow thruster, nor am I an engineer. I certainly cannot suggest intended strategies, but I have some suggestions for you. I

We just completed servicing Aletes' bow thruster on the hard, postings from this BB in our greasy hands. Yet upon completion we have concerns about the water tight integrity of the bow thruster. 1.

Hi Eric I went to check this on my boat and found I couldn't understand which AC setting you mean to test. Can you please clarify? Roger, Mango 28 There was an article in a recent Cruising World on