Hi Vito, Following your example I have now had my heat exchanger cleaned. After 2000 hours needed it!Thanks for the tip. Ian

Dear Mr. Potter, Thank you for the helpful information. The engine seems ok a t this point. I definitely need new motor mounts and some seals. The Max Prop settings are great. Thank you. Do you

Dear Mr. Reich, Is your Perkins engine in need of a re-build? I have a very low hour VOLVO TMD 22 engine which is actually a Perkins Prima/M80 Turbo with green paint. When Caterpillar

Thank you Richard. I'll check it out. Udo J. Reich ambiente european tile design Direct 206. 388 1025 Fax 206. 388 1043 _____ Sent: Wednesday, April 26, 2006 6:04 PM To:

Udo, I have a 1989 Super Maramu with perhaps the same model M80T Perkins. I suggest you give Foley Engines up in Mass a call or email--they have everything you'll need to get your Perkins and

We are the new owners of a SM built in 1991 with the 80 hp Perkins Turbo and a Maxprop. I have several questions. Has anybody changed engines and switched to the 4JH3-HTE Yanmar engine? If we keep

Put deck stripes in the search box and become a well read painter!! Regards, John

I don't have experience with the Maramu, however I have removed the forestay on our Super Maramu. There is a plastic spacer at the bottom of the foil that must be removed before pulling the

Ken, I have no experience with the furler, but lots with frozen,rusted bolts and nuts. There is a product called 'Blaster' P B sold in auto supply stores. It's 10 to one better then wd40 or any thing

rbenven44 We would like to paint the deck strips on our Amel and saw the pictures you had posted. Could you let us know what materials you used. The stripes look GREAT! James DeSalvo

Thanks Eric I figured Amel must have done something to make it easy. As usual you are a lifesaver. Vito bolts on the washer

Vito, If your washer is anything like mine, there are a few polished bolts on the sides of the washer cabinet. By removing these few bolts the whole cabinet comes away from the washer and is very

Hello everyone I have a 2000 SM# 283 with Thomson washer/drier I have notied a slight leak in my clothes washer drier. I believe its from the freshwater intake but I cant be sure. Has anyone had a

Thank you for that, this is of great help Horst - Maramu 168 ________________________________ From: amelyachtowners@... [mailto:amelyachtowners@...] On Behalf Of

Battery box on Maramu hull 192 is: Length from inside forward end to pipe block aft: 43.25" Width: 13.5" This is compressing the foam that is still in my battery box on the engine room wall side. I

I have removed the main to paint and re rig on 1985 Maramu hull # 192. All is apart except I am having difficulty getting the forestay out of the furling tube. I have tied the base to a tree and have

I need new batteries, but am away from the boat. Can anyone please measure the battery box, length and width, - I don't want to end up with having to make a new box! Thank you Horst -

I have available some Navionics charts, never used because I have change my Furuno by a Simrad, the charts cover the Mediterranean coasts from Turquey , Greece, Italy, Balearics, Spanish

For all you loony racers out there in cyberland, you will find a Southern California PHRF handicap rating from 2004 posted in the file section of this forum. There is one error that I did not correct,

hi, i have some photos i would like to post to my photo album on this site but i get the above message when i try to post. what am i doing wrong. thanks eric sm 376 Kimberlite